These replacement seals are essential parts to install if you are carrying out a full fork rebuild or general fork maintenance.
These seals have a 34mm internal diameter, reduce suspension friction for increased performance and are genuine Manitou replacement suspension parts.
This dirt jump suspension fork comes equipped with a hard-wearing 4130 steel leg construction, which makes it tough and dependable when nailing your favourite stunts. Ideal for slope-style riders, this fork is also kitted out with 32mm stanchions for excellent stiffness and stability when landing. Another highlight is its coil spring, which ensures smooth and consistent performance as you conquer your way around the track. Adjustable Dirt Jump Fork Featuring ABS+ compression damping with Jump Stack as well as in-leg adjustable TPC rebound damping, this dirt jump fork makes it easy to dial in your settings to fit in with your riding style or the terrain. Thanks to its adjustable air, rebound and compression, it provides a more rider-tuned feel as you charge from jump to jump. Coming complete with 100mm travel that's internally adjustable from 80-100mm, this model is ready for fast and fun rides at your local track. The Circus project started as a way to get Manitou's slope-style riders into competition; but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. Additional Item Top Features: Travel: 100mm (80-100mm internally adjustable) Crown: 1-1/8" Hollow Beam, Tapered Forged Beam Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Wheel Size: 26" Offset: 41mm Ride Height: 458-478mm Manufacturer's Part Number: 191-29790-A801 Black 26" 100mm
Manitou Hexlock SL Thru AxleA compact, simple, and lightweight replacement axle for your Manitou Mattoc, Machete, Magnum, Marvel, or Minute QR15 forks. Axle tension is easily tweaked and dialled-in with a 6mm hex key.Features:Lightweight replacement axleInstallation requires a Torx driver (to remove the QR15 cap) and a pin spanner to install the captive boltDimensions: 15x100mmBuy Manitou Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Suspension Fork Air Piston SealAn ideal and efficient set of spare seals from Manitou to keep your air pistons performing at the highest level. Features Compatibility: Manitou fork air pistons Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Fork Bushing Kit (Markhor/M30/R7)The ideal replacement bushing set for your Markhor, M30 or R7 Manitou fork, these spares will reinvigorate the efficiency of your suspension setup. Features Compatibility: Manitou Markhor, M30, R7 forks Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Suspension Fork Air Piston Kit (Air/Pom) A handy replacement or spare kit for the maintenance of your Manitou forks, this piston kit comes with a seal and slickoleum grease for precision and efficient installation. Features Compatibility: Manitou fork air pistons Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Fork Air Piston Kit (Mag/Mast/Matt)The perfect kit for maintaining your Manitou Expert Air spring, this piston kit comes with the appropriate lubricant to ensure a smooth and efficient job is carried out. Features Compatibility: Manitou Expert Air Spring Includes: Manitou Slickoleum Grease Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Fork Air Piston Kit (Mag/Mast/Matt)The perfect kit for maintaining your Manitou Expert Air spring, this piston kit comes with the appropriate lubricant to ensure a smooth and efficient job is carried out. Features Compatibility: Manitou Expert Air Spring Includes: Manitou Slickoleum Grease Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Suspension Fork Dust SealsA superb set of spare seals to keep your Magnum, Mastodon and Mattoc Manitou forks free from dust and dirt build-up. Features Compatibility: Manitou Magnum, Mastodon and Mattoc forks Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Fork Rebuild Kit (Markhor/M30/R7)An ideal collection of seals for use when repairing or refreshing your Markhor, M30 and R7 Manitou forks. Features Compatibility: Manitou Markhor, M30 and R7 Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Fork Rebuild Kit (Machete/Circus/Marvel)This rebuild kit contains a collection of spare parts and lubes to keep your Manitou Machete, Circus, Marvel and Minute forks in top-condition. Whether making repairs or refreshing your suspension setup, this is an excellent kit for keeping your forks performing as they should.Features: Use: MTB Compatibility: Manitou Machete, Circus, Marvel and Minute forks Part Number: 141-28528-K009Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Integrated Lock Out (MILO)Easy to install, this set contains everything you need to enjoy light actuation and easy operation in all riding conditions. Specifically designed for use with your Manitou forks with MILO (2011+), this kit comes equipped with a lever and a cable for quick and easy setup. This kit contains genuine Manitou spare parts.Features: Use: Mountain Bike (MTB) Part Number: 141-31975-K003 Compatibility: Manitou forks with Milo (2011+) Included: Lever and cable Weight: 65gManufacturer's Part Number: 141-31975-K003 Lever + CableBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Pro Boost Mountain Bike ForkThese brilliant forks are perfect for taking your enduro riding up a notch as they offer unbeatable adjustability and control. Ready for battle, this stunning duo features a deep hollow-forged aluminium crown for phenomenal toughness as you race for the podium. Furthermore, their 7050 butted aluminium legs provide another layer of durability and longevity as you shred across challenging terrain conditions against the clock.Adjustable MTB ForksIdeal for adrenaline-fuelled rides, these forks are equipped with some of the best adjustable features to propel you up the leaderboard. Their adjustable low and high speed compression damping, hydraulic bottom-out circuit and a fully adjustable air spring gives you the freedom to dial in your settings exactly how you want. As a result, you'll enjoy being able to effortlessly set-up your forks to match your specific riding style, discipline or the terrain conditions.Features: Crown Material: Deep hollow-forged Aluminium Leg Material: 7050 butted Aluminum Use: MTB, Enduro, E-bike certified Spring: Dorado Air/IRT Cartridge: MC² bladder cartridge Wipers: Low friction SKF Hose Routing: Front and rear brake hose routing Steerer: 1 1/8"-1.5" tapered Travel: 140-180mm Offset: 37, 44 (27.5 version); 44, 51 (29 version) Axle: Hexlock SL, 15x110mm Brake Mount: Disc PM7 (direct mount 180mm) Compression Damping: MC2 Rebound Damping: Adjustable TPC Cartridge Adjustments: High speed compression, low speed compression, low speed rebound, Infinite Rate Tune (IRT), air pressure Stanchions: 37mm Max Tyre: With Fender: 2.6"; Without Fender: 2.8" Included: Fender/travel spacers Weight: 2kg (approx)Technologies: Reverse Arch: Reverse Arch has equivalent stiffness with less weight. By placing the arch in the rear, behind the high point of the tyre, Manitou's reverse arch design achieves equivalent stiffness with less weight. The arch is shorter in height, resulting in more efficient use of material. MC² (Multi-Control Compression): Manitou's MC² (Multi-Control Compression) Damper comes in a fully sealed bladder cartridge offering independent Lo Speed and Hi Speed Compression adjustments. TPC Rebound: Two Stage Shim Stack to better isolate low speed and high speed rebound damping. Optimizes the rebound response for short travel chatter and deep travel hits without the complexity of adding in another adjuster. Bladder Cartridge: The sealed system separates air from the oil in the damper maintaining damping consistency in the most severe riding conditions. The new Mezzer bladder cartridge reduces the oil volume resulting in a lower overall weight. At the same time it assures a low brake away force from optimized shaft seal design. Blow Off Valve: Patent pending bladder blow off valve prevents over pressurisation and rupture of the bladder. HBO (Hydraulic Bottom Out): The internal HBO circuit ramps up damping during the final 30mm of travel protecting you from hard unexpected bottom-outs. Dorado Air: Our lowest weight World Cup proven high performance air spring technology offering ultimate sensitivity, featuring a selfequalizing” negative air spring. Originally developed for the Dorado down hill fork, Dorado air has a single fill valve (on the bottom of the fork) that simultaneously fills the positive and negative air chambers, so the pressure is equalised. IRT (Infinite Rate Tune: Infinite Rate Tune (IRT) allows the rider to control mid stroke support and bottom out progressivity independent from initial sp ring rate to independently tune small bump sensitivity and big hit performance. Hollow-bore Crown: Chassis stiffness and weight optimized with Manitou's patented Hollow-Bore Crown. Low Friction Wipers: Proprietary SKF low-friction rubber compound and sealing lip profile to further reduce the friction in the Mezzer. New Hexlock SL2: The new tooled Hexlock SL2 axle saves 26g over the previous version).Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Circus Comp Suspension ForkSpecifically designed for the demands of dirt jumping, the Circus Comp suspension fork features a robust 4130 steel leg construction, which makes it tough and dependable when nailing your favourite stunts. Ideal for slope-style riders, it's also kitted out with 32mm stanchions for excellent stiffness and stability when landing. Another highlight is its coil spring, which ensures smooth and consistent performance as you conquer your way around the track.Adjustable Dirt Jump ForkFeaturing ABS+ compression damping with Jump Stack as well as in-leg adjustable TPC rebound damping, this dirt jump fork makes it easy to dial in your settings to fit in with your riding style or the terrain. Thanks to its adjustable rebound and compression, it provides a more rider-tuned feel as you charge from jump to jump. Coming complete with 100mm travel that's internally adjustable from 80-100mm, this model is ready for fast and fun rides at your local track.The Circus project started as a way to get Manitou's slope-style riders into competition; but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.Features: Leg Material: 4130 Steel Leg Diameter: 32mm Use: Dirt Jump Axle Size: 20mm thru-axle Steerer Diameter: 1 1/8" Straight Spring Type: Coil Compression Damping: ABS+ with Jump Stack Rebound Damping: In-leg adjustable TPC Adjustments: Rebound, Compression Travel: 100mm (80-100mm internally adjustable) Crown: 1-1/8" Hollow Beam, Tapered Forged Beam Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Wheel Size: 26" Offset: 41mm Ride Height: 458-478mm Weight: 2534gManufacturer's Part Number: 191-29790-A801 Black 26" 100mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Comp Suspension ForkFeaturing a robust 6000 series aluminium leg construction, this mountain bike (MTB) suspension fork delivers tough and dependable performance as you charge down the trail. Coming kitted out with Boost axle spacing, it also ensures stiffer, stronger and more efficient handling when dominating your way across challenging terrain conditions. Benefitting from post most disc brake rotor compatibility, it offers reliable front-end suspension performance in combination with your powerful and consistent braking set-up.Inverted Design and 37mm StanchionsInverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control to the rider over rough trail sections. 37mm proved to be the perfect balance of increased stiffness, weight savings, and an ideal seal surface area for reduced friction. Compared to the previous 36mm version of the Dorado, the updated 37mm alloy increased in stiffness at 20% for both fore-aft and torsionally when compared to the former 36mm. Dorado Comp is also electric bike (E-bike) certified.Coil Spring and Absolute Plus (ABS+) DampingReady for fast and intense rides, this model is equipped with a coil spring for maximum bump sensitivity and simple service procedures. Known for its incredible reliability and easy tuning, its Absolute Plus (ABS+) damper is a shim stack based damper that features external incremental Low Speed compression adjustment. The piston and shim stack are adaptable for a wide range of riding styles.Coil Fans Rejoice!Once again, the Dorado is available with a coil option. The updated Dorado Comp features the same 37mm chassis as the Expert, but with a more set it and forget it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Manitou Dorado Comp Suspension Fork is built for riders who just want to ride and not sweat any of the small stuff.Features: Legs Material: 6000 Series Aluminium Legs Diameter: 37mm Use: MTB Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Spring: Coil (5 rates available) Compression Damping: Absolute Plus (ABS+) Rebound Damping: Cartridge Adjustable TPC Adjustments: LS Compression, Rebound, Spring Preload, Spring Rate Wheel Size: Multiple options available to select Offset: 47mm Flat Crown (27.5" Option); 57mm Drop Crown (29" Option) Ride Height: 582mm (27.5" Option); 602mm (29" Option) Travel: 203mm Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR Options: Fender E-Pac: Yes Weight: 3600g (Firm Spring)Technologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The updated chassis is 20% stiffer compared to the brand's former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, 50lb/in. ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjust and low-speed rebound adjustment. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-37873-A101 Black 27.5" 203mm 191-37873-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Expert Suspension ForkFeaturing high-quality 6000 series aluminium legs, this mountain bike (MTB) suspension fork is robust and reliable as you charge from trail to trail. Manitou has also equipped this model with Boost axle spacing for stronger, stiffer and more efficient performance, wherever your next mountain adventure takes you. Benefitting from 203mm travel that's also internally adjustable, it allows you to tweak it for a more rider-tuned feel. Coming kitted out with post mount disc brake rotor compatibility, you'll enjoy its dependable front end suspension performance combined with powerful and consistent braking.Dorado Air Spring and TPC+ Compression DampingReady for wherever the trail leads you, this MTB fork is equipped with a wide range of adjustment features for a more customised feel on your bike. Its Dorado Air air spring with Incremental Volume Adjust (IVA) offers a consistent feel without any flat or dead spots. Another highlight is its TPC+ compression damping with Hydraulic Bottom Out (HBO), which delivers improved bump compliance, increased consistency as well as a smooth and predictable feel for every impact. With high-speed compression, low-speed compression plus, low-speed rebound adjustments, this is a great choice of upgrade for dialling in your ideal settings to match your riding style as well as the terrain.Get InvertedBack and better than ever the updated Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you're looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah, the Dorado Expert has you covered. Featuring a revised 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the Manitou Dorado Expert Suspension Fork is your ticket to the best ride you've ever had.Features: Legs Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Mountain Bike (MTB) Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Air Spring: Dorado Air with Incremental Volume Adjust (IVA) Compression Damping: TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Cartridge Adjustable TPC Adjustments: Air, Air Volume, Rebound, HS and LS Compression Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR E-Bike Compatible: Yes Offset: 47mm (27.5" Option); 57mm (29" Option) Ride Height: 582mm (27.5" Option), 602mm (29" Option) Travel: 203mm internally adjustable Weight: 3120gTechnologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston and your volume amount. TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-38304-A101 Black 27.5" 203mm 191-38304-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Expert Suspension ForkFeaturing high-quality 6000 series aluminium legs, this mountain bike (MTB) suspension fork is robust and reliable as you charge from trail to trail. Manitou has also equipped this model with Boost axle spacing for stronger, stiffer and more efficient performance, wherever your next mountain adventure takes you. Benefitting from 203mm travel that's also internally adjustable, it allows you to tweak it for a more rider-tuned feel. Coming kitted out with post mount disc brake rotor compatibility, you'll enjoy its dependable front end suspension performance combined with powerful and consistent braking.Dorado Air Spring and TPC+ Compression DampingReady for wherever the trail leads you, this MTB fork is equipped with a wide range of adjustment features for a more customised feel on your bike. Its Dorado Air air spring with Incremental Volume Adjust (IVA) offers a consistent feel without any flat or dead spots. Another highlight is its TPC+ compression damping with Hydraulic Bottom Out (HBO), which delivers improved bump compliance, increased consistency as well as a smooth and predictable feel for every impact. With high-speed compression, low-speed compression plus, low-speed rebound adjustments, this is a great choice of upgrade for dialling in your ideal settings to match your riding style as well as the terrain.Get InvertedBack and better than ever the updated Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you're looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah, the Dorado Expert has you covered. Featuring a revised 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the Manitou Dorado Expert Suspension Fork is your ticket to the best ride you've ever had.Features: Legs Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Mountain Bike (MTB) Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Air Spring: Dorado Air with Incremental Volume Adjust (IVA) Compression Damping: TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Cartridge Adjustable TPC Adjustments: Air, Air Volume, Rebound, HS and LS Compression Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR E-Bike Compatible: Yes Offset: 47mm (27.5" Option); 57mm (29" Option) Ride Height: 582mm (27.5" Option), 602mm (29" Option) Travel: 203mm internally adjustable Weight: 3120gTechnologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston and your volume amount. TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-38304-A101 Black 27.5" 203mm 191-38304-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Pro Suspension ForkThe legendary Dorado Pro is back and well-equipped to turn the suspension world upside down with many of Manitou's finest technologies. Developed specifically for the rigours of modern downhill riding, this model features high-quality 6000 series aluminium legs with a carbon outer and carbon upper tubes delivering a fantastic combination of stiffness, durability and low weight performance. Its updated stiffer chassis is also paired with a sealed version of the TPC+ damper and an improved Dorado Air Spring with IRT volume adjuster. These technologies combined into one ultimate platform provides more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease.Carbon Fibre and Inverted DesignAfter its debut 11 years ago, the Dorado Pro is once again dressed in carbon. In addition to looking amazing, the upper carbon tubes allow 238g in weight savings compared to alloy along with increased stiffness. Inverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control over rough trail sections.Dorado Air Spring and TSR Trail Side ReliefDorado Air spring systems contain a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. TSR Bleed Buttons allow excess pressure built up in the outer legs of the fork to be equalised with a simple press of the button located on the top cap.TPC+ Twin-Piston Cartridge DamperTPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in the travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out.Features: Outer Leg Material: Carbon Leg Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Downhill Axle: 110x20mm Boost Thru Axle Steerer Diameter: 1 1/8" Straight Spring: Dorado Air with Infinite Rate Tune (IRT) Compression Damping: Sealed Cartridge TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Sealed Cartridge TPC Crown: Forged Travel: 203mm Adjustments: Air, IRT, Rebound, HS, and LS Compression Offset: 47mm Flat Crown (27.5"); 57mm Drop Crown (29") Ride Height: 582mm (27.5"); 602mm (29") Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR Buttons Options: Fender (sold separately) E-Bike Compatible: No Weight: 2970gTechnologies: Carbon Fibre Legs and the 37mm Chassis: Result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. Inverted Design: Provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring System: Contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IRT (Infinite Rate Tune): Allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle to end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. Sealed TPC+: Is a velocity and position-dependent damping circuit that maintains light damping thru small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increased the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder, an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. Fits Both 29" and 27.5" Wheels: Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. Two Crown Options: Are available with this fork (select from the drop-down menu). The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed buttons: Allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-37419-A101 Black 27.5" Short Offset 191-37419-A201 Black 29" Long OffsetBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Machete Mountain Bike Suspension ForkWhether you're exploring new trail routes on your own or shredding with your friends after work, this mountain bike (MTB) fork is engineered for dependable off-road performance. It features a durable 6000-series straight wall aluminium leg construction, which makes it ideal at handling the knocks and bumps that are associated with all-day epics in the mountains. Manitou has also equipped this model with a TS Air spring, Kwik Toggle compression damping as well as In-leg adjustable TPC rebound damping. This means that riders can set it up to perfectly match their riding style as well as the terrain conditions. Inspired by the brand's renowned Absolute+ technology, this version's Kwik Toggle compression damping also achieves on/off lockout simplicity in a lightweight, practical package.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Matte Axle: 15x110mm Hexlock Use: MTB Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: TS Air Compression Damping: Kwik Toggle Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, Lockout Brake Compatibility: Post Mount 160mm (203mm Max)Max Tyre Size: 68mm (27.5"); 77mm (27.5+) and 68mm (29")Offset: 37mm (27.5"); 44mm (27.5+/29")Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29")Travel: Multiple options available to selectE-Pac: No Weight: 1862g (27.5"); 1885g (27.5+/29")Manufacturer's Part Numbers: 191-36971-A002 Black 27.5" x 120mm travel 191-36971-A003 Black 27.5" x 100mm travel 191-36975-A002 Black 27.5+/29" x 120mm travel 191-36975-A003 Black 27.5+/29" x 100mm travelBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.