Endura Pro SL Race Short Sleeve JerseyUnashamedly made for the demands of racing, the Endura Pro SL Race Short Sleeve Jersey takes a minimalist, lightweight approach, leaving you to concentrate on your training and racing. Be it legs screaming as you attack on a climb, the satisfaction of making the breakaway, or putting the hurt on rivals in an echelon, the Pro SL Race Short Sleeve Jersey is made for the excitement and challenges of full-gas racing. Super-light and quick-wicking fabrics make sure you've no distractions during your ride, leaving you to focus on hitting your training numbers or keeping an eye on race rivals. Endura makes use of bonded seams, reducing bulk and weight and ensuring irritation-free comfort for your ride.The lightweight theme continues to the three rear pockets. A low-weight triple pocket construction gives you space for your race and training essentials. The Pro SL Race gets Endura’s Athletic cut. This provides a closer-to-the-body fit than their standard cycling jerseys, ensuring you’re not wasting watts when the time comes to put the power down. Structured mesh sleeves with bonded cuffs also provide a smooth and lightweight fit, hugging the arm closely giving optimal aerodynamic efficiency. Features:Materials: 85% Recycled Polyester, 15% ElastaneExtra fine, super light, rapid-wicking fabricsContains recycled fabricStructured mesh sleeves with bonded cuffs and silicone internal gripperLightweight bonded seams for low bulkMinimalist, low-weight triple rear pocket constructionAthletic cut with a non-flap race fitBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Race Short Sleeve JerseyUnashamedly made for the demands of racing, the Endura Pro SL Race Short Sleeve Jersey takes a minimalist, lightweight approach, leaving you to concentrate on your training and racing. Be it legs screaming as you attack on a climb, the satisfaction of making the breakaway, or putting the hurt on rivals in an echelon, the Pro SL Race Short Sleeve Jersey is made for the excitement and challenges of full-gas racing. Super-light and quick-wicking fabrics make sure you've no distractions during your ride, leaving you to focus on hitting your training numbers or keeping an eye on race rivals. Endura makes use of bonded seams, reducing bulk and weight and ensuring irritation-free comfort for your ride.The lightweight theme continues to the three rear pockets. A low-weight triple pocket construction gives you space for your race and training essentials. The Pro SL Race gets Endura’s Athletic cut. This provides a closer-to-the-body fit than their standard cycling jerseys, ensuring you’re not wasting watts when the time comes to put the power down. Structured mesh sleeves with bonded cuffs also provide a smooth and lightweight fit, hugging the arm closely giving optimal aerodynamic efficiency. Features:Materials: 85% Recycled Polyester, 15% ElastaneExtra fine, super light, rapid-wicking fabricsContains recycled fabricStructured mesh sleeves with bonded cuffs and silicone internal gripperLightweight bonded seams for low bulkMinimalist, low-weight triple rear pocket constructionAthletic cut with a non-flap race fitBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Race Short Sleeve JerseyUnashamedly made for the demands of racing, the Endura Pro SL Race Short Sleeve Jersey takes a minimalist, lightweight approach, leaving you to concentrate on your training and racing. Be it legs screaming as you attack on a climb, the satisfaction of making the breakaway, or putting the hurt on rivals in an echelon, the Pro SL Race Short Sleeve Jersey is made for the excitement and challenges of full-gas racing. Super-light and quick-wicking fabrics make sure you've no distractions during your ride, leaving you to focus on hitting your training numbers or keeping an eye on race rivals. Endura makes use of bonded seams, reducing bulk and weight and ensuring irritation-free comfort for your ride.The lightweight theme continues to the three rear pockets. A low-weight triple pocket construction gives you space for your race and training essentials. The Pro SL Race gets Endura’s Athletic cut. This provides a closer-to-the-body fit than their standard cycling jerseys, ensuring you’re not wasting watts when the time comes to put the power down. Structured mesh sleeves with bonded cuffs also provide a smooth and lightweight fit, hugging the arm closely giving optimal aerodynamic efficiency. Features:Materials: 85% Recycled Polyester, 15% ElastaneExtra fine, super light, rapid-wicking fabricsContains recycled fabricStructured mesh sleeves with bonded cuffs and silicone internal gripperLightweight bonded seams for low bulkMinimalist, low-weight triple rear pocket constructionAthletic cut with a non-flap race fitBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Pro SL Race Short Sleeve JerseyUnashamedly made for the demands of racing, the Endura Pro SL Race Short Sleeve Jersey takes a minimalist, lightweight approach, leaving you to concentrate on your training and racing. Be it legs screaming as you attack on a climb, the satisfaction of making the breakaway, or putting the hurt on rivals in an echelon, the Pro SL Race Short Sleeve Jersey is made for the excitement and challenges of full-gas racing. Super-light and quick-wicking fabrics make sure you've no distractions during your ride, leaving you to focus on hitting your training numbers or keeping an eye on race rivals. Endura makes use of bonded seams, reducing bulk and weight and ensuring irritation-free comfort for your ride.The lightweight theme continues to the three rear pockets. A low-weight triple pocket construction gives you space for your race and training essentials. The Pro SL Race gets Endura’s Athletic cut. This provides a closer-to-the-body fit than their standard cycling jerseys, ensuring you’re not wasting watts when the time comes to put the power down. Structured mesh sleeves with bonded cuffs also provide a smooth and lightweight fit, hugging the arm closely giving optimal aerodynamic efficiency. Features:Materials: 85% Recycled Polyester, 15% ElastaneExtra fine, super light, rapid-wicking fabricsContains recycled fabricStructured mesh sleeves with bonded cuffs and silicone internal gripperLightweight bonded seams for low bulkMinimalist, low-weight triple rear pocket constructionAthletic cut with a non-flap race fitBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Burner Lite PantsThe Endura MT500 Burner Lite Pants are the lighter and more ventilated cousin of the Atherton-endorsed DH pant version. Just right for hot trails and sweat-inducing enduro racing. Whether a rowdy summer ride with mates at a local trail centre or the nervous excitement of testing man and machine at an enduro competition, the MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Burner Lite PantsThe Endura MT500 Burner Lite Pants are the lighter and more ventilated cousin of the Atherton-endorsed DH pant version. Just right for hot trails and sweat-inducing enduro racing. Whether a rowdy summer ride with mates at a local trail centre or the nervous excitement of testing man and machine at an enduro competition, the MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Burner Lite PantsThe Endura MT500 Burner Lite Pants are the lighter and more ventilated cousin of the Atherton-endorsed DH pant version. Just right for hot trails and sweat-inducing enduro racing. Whether a rowdy summer ride with mates at a local trail centre or the nervous excitement of testing man and machine at an enduro competition, the MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Burner Lite PantsThe Endura MT500 Burner Lite Pants are the lighter and more ventilated cousin of the Atherton-endorsed DH pant version. Just right for hot trails and sweat-inducing enduro racing. Whether a rowdy summer ride with mates at a local trail centre or the nervous excitement of testing man and machine at an enduro competition, the MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura MT500 Burner Lite PantsThe Endura MT500 Burner Lite Pants are the lighter and more ventilated cousin of the Atherton-endorsed DH pant version. Just right for hot trails and sweat-inducing enduro racing. Whether a rowdy summer ride with mates at a local trail centre or the nervous excitement of testing man and machine at an enduro competition, the MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Women's MT500 Burner Lite PantsEndura has taken their Atherton-endorsed DH pants, reduced the weight and increased ventilation, making the Women's MT500 Burner Lite Pants - ideal for hot summer trails and sweaty enduro racing. Whether a rowdy summer ride with friends at a local trail centre or the nervous excitement of testing woman and machine at an enduro competition, the Women's MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary female fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Women's MT500 Burner Lite PantsEndura has taken their Atherton-endorsed DH pants, reduced the weight and increased ventilation, making the Women's MT500 Burner Lite Pants - ideal for hot summer trails and sweaty enduro racing. Whether a rowdy summer ride with friends at a local trail centre or the nervous excitement of testing woman and machine at an enduro competition, the Women's MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary female fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Women's MT500 Burner Lite PantsEndura has taken their Atherton-endorsed DH pants, reduced the weight and increased ventilation, making the Women's MT500 Burner Lite Pants - ideal for hot summer trails and sweaty enduro racing. Whether a rowdy summer ride with friends at a local trail centre or the nervous excitement of testing woman and machine at an enduro competition, the Women's MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary female fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Women's MT500 Burner Lite PantsEndura has taken their Atherton-endorsed DH pants, reduced the weight and increased ventilation, making the Women's MT500 Burner Lite Pants - ideal for hot summer trails and sweaty enduro racing. Whether a rowdy summer ride with friends at a local trail centre or the nervous excitement of testing woman and machine at an enduro competition, the Women's MT500 Burner Lite Pants make sure you're always leading the way in trail-crushing comfort. When you're throwing your bike about it's the 4-way stretch fabric that makes sure there's nothing to hold you back. You'll also welcome the mesh panels and laser-cut leg perforations, allowing cool air to circulate and sweat to escape - perfect for hot-weather riding sessions.The trousers are made in a slim and contemporary female fit, preventing too much flapping or chain catch, while still making space for slim-line knee pads. At the waist, low-profile Velcro® adjusters keep the fit secure and prevent annoying pant slippage mid-trail. And if you prefer some extra seat padding, they’re fully compatible with any Endura ClickFast™ Liner.Clickfast™ CompatibleAll Endura Baggy Shorts and Pants with the “Clickfast™ compatible” logo are Clickfast™ ready. These can be worn with any Endura Clickfast™ undershorts or liner. Features:Materials: 70% Polyamide, 20% Polyester, 10% ElastaneLightweight 4-way stretch fabric with mesh panels for coolingPFC-Free, non-toxic durable water-repellent finishZipped hand pocketsLaser-cut perforation detail for better airflow through the legsLow-profile waist adjustment with secure Velcro® fasteningContemporary slim cut with room for low-profile knee padsClickFast™ liner compatible (Liner not supplied)Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Junior Full Face Protection For Serious Mini Rippers. Lightweight in-mould construction Large vents for increased airflow One-handed micro adjust fit system with multiple anchor points for wide range of adjustment Fast wicking quick dry soft touch removable padding Goggle friendly design with rear strap gripper Covered by Endura’s Crash Replacement Policy and Endura Product Guarantee Certified to CE Standard EN1078:2012 + 1 A1:2012 CPSC & ASTM F1952 Construction Main Polystyrene 50% Polycarbonate 25% Polypropylene 15% Nylon 5% Polyester 5%
Endura MT500 MIPS HelmetCombining two leading head protection systems, MIPS and Koroyd, the Endura MT500 MIPS Helmet gives you unrivalled head protection for when you're slaying mountain bike trails. Taking your head protection to the next level, the MT500 MIPS Helmet combines a host of features to make your mountain biking safer and give you the confidence to take on ever more challenging terrain. Starting with the in-mould construction, this combines a tough and durable outer with a shock-absorbing foam inner. This keeps your head protected when you push your limits a bit too far and hit the ground. Koroyd Technology Engineered ProtectionThe MT500 also features Koroyd protection. Thousands of co-polymer extruded tubes are thermally welded to create a consistent and fully engineered energy absorption system. These cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool and ComfortableAs well as keeping your head safe, the MT500 is comfortable too. The adjustment system is quick and easy to use via a rear dial, ensuring you always get a good fit. After all, a good-fitting helmet is a safer more comfortable helmet. Inside, you'll also find quick-wicking and quick-drying pads. These make sure a tough pedal upwards won't leave your brow soaked in sweat.Airflow is also optimised for cool comfort. Large vents, including an upper 'air intake' zone, keep fresh air circulating and allow damp air to escape. Front vets also act as a sunglasses dock. And if you prefer wearing goggles, then a rear gripper will keep your goggle strap firmly in place over any terrain. An adjustable visor completes the awesome trail-ready package.Features:Lightweight in-mould construction; Full Koroyd core provides increased energy absorptionMIPS® Brain Protection System reducing multi-directional impactsRemovable, adjustable visor offering a wide range of movementLarge vents including top ‘air intake’ zone provide increased airflowFast wicking, quick-dry, soft-touch, removable paddingA one-handed micro-adjust fit system, integrated into MIPS layerGoggle-friendly design with rear strap gripper and front vents act as sunglasses “dock”Clip-on accessory mount, accessory clip and light mount includedCertified to CPSC and CE EN1078:2012 + A1:2012 StandardsShop all MIPS helmets - Click hereBuy Endura Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Jacket IIMuddy trails. Stormy wet-weather. The ideal time for some mountain bike fun. And the waterproof Endura SingleTrack MTB Jacket II makes sure you'll be riding in comfort, despite the wild weather. It's thanks to the 3-layer ExoShell20™ waterproof fabric that the SingleTrack MTB Jacket II does such a great job of keeping you dry when conditions turn wet and muddy. Its 10,000mm waterproof rating means you stay drier for longer. Which means more fun time on the trails. But excellent breathability also maintains comfort even when working up a sweat on steep and technical climbs. Despite the weather, there may come a point when some fresh air is welcome. And here the underarm vents let you easily regulate airflow to the inside and thus control body temperature. However, if the weather turns particularly nasty, pull up the hood for extra protection. Lastly, reflective trims make you easy to spot at night, lit up when caught in the light of your night-riding buddies headlamps. ExoShell20™ ECO 3 fabricA soft, noise-free outer fabric is faced with a super-fine denier tricot inner layer to give outstanding comfort against the skin. Sandwiched between the outer and inner is a thin PU membrane, giving a 10,000mm waterproof rating to keep the rain out, while 20,000g/m2/24hr breathability ensures you remain sweat-free as you build body heat. Features:Materials: 80% Recycled Polyester, 20% PolyesterWaterproof and breathable ExoShell20TM ECO 3 layer fabricContains 80% recycled fabric with PFC-Free, non-toxic durable water repellent finishWater repellent front zip with storm flapGrown on hood with front adjustmentWater repellent zips on centre front and chest pocketPits vents for temperature regulationReflective trims on hood, cuff and rear tailWaterproof- 10000 mm / Breathable - 20000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Jacket IIMuddy trails. Stormy wet-weather. The ideal time for some mountain bike fun. And the waterproof Endura SingleTrack MTB Jacket II makes sure you'll be riding in comfort, despite the wild weather. It's thanks to the 3-layer ExoShell20™ waterproof fabric that the SingleTrack MTB Jacket II does such a great job of keeping you dry when conditions turn wet and muddy. Its 10,000mm waterproof rating means you stay drier for longer. Which means more fun time on the trails. But excellent breathability also maintains comfort even when working up a sweat on steep and technical climbs. Despite the weather, there may come a point when some fresh air is welcome. And here the underarm vents let you easily regulate airflow to the inside and thus control body temperature. However, if the weather turns particularly nasty, pull up the hood for extra protection. Lastly, reflective trims make you easy to spot at night, lit up when caught in the light of your night-riding buddies headlamps. ExoShell20™ ECO 3 fabricA soft, noise-free outer fabric is faced with a super-fine denier tricot inner layer to give outstanding comfort against the skin. Sandwiched between the outer and inner is a thin PU membrane, giving a 10,000mm waterproof rating to keep the rain out, while 20,000g/m2/24hr breathability ensures you remain sweat-free as you build body heat. Features:Materials: 80% Recycled Polyester, 20% PolyesterWaterproof and breathable ExoShell20TM ECO 3 layer fabricContains 80% recycled fabric with PFC-Free, non-toxic durable water repellent finishWater repellent front zip with storm flapGrown on hood with front adjustmentWater repellent zips on centre front and chest pocketPits vents for temperature regulationReflective trims on hood, cuff and rear tailWaterproof- 10000 mm / Breathable - 20000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Taking your head protection to the next level, the MT500 MIPS Helmet combines a host of features to make your mountain biking safer and give you the confidence to take on ever more challenging terrain. Starting with the in-mould construction, this combines a tough and durable outer with a shock-absorbing foam inner. This keeps your head protected when you push your limits a bit too far and hit the ground. Koroyd Technology Engineered Protection The MT500 also features Koroyd protection. Thousands of co-polymer extruded tubes are thermally welded to create a consistent and fully engineered energy absorption system. These cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable As well as keeping your head safe, the MT500 is comfortable too. The adjustment system is quick and easy to use via a rear dial, ensuring you always get a good fit. After all, a good-fitting helmet is a safer more comfortable helmet. Inside, you'll also find quick-wicking and quick-drying pads. These make sure a tough pedal upwards won't leave your brow soaked in sweat. Airflow is also optimised for cool comfort. Large vents, including an upper 'air intake' zone, keep fresh air circulating and allow damp air to escape. Front vets also act as a sunglasses dock. And if you prefer wearing goggles, then a rear gripper will keep your goggle strap firmly in place over any terrain. An adjustable visor completes the awesome trail-ready package.
Bikes have changed the way people travel countless times over the past 200 years and with the current emphasis on fossil fuel free travel they are doing so yet again. Endura's Speed Pedelec Helmet is designed to meet the demands of the modern speed pedelec commuter and recreational cyclist. NTA8776 S-EPAC Speed Pedelec CertificationIn addition to CE standard EN1078 certification the Speed Pedelec Helmet also meets the NTA8776 S-EPAC certification offering greater levels of impact protection and head coverage for these higher speed classification e-bikes with a maximum speed of 28mph (45kph). The full Koroyd core ensures additional protection but doesn’t mean extra weight. The helmet also includes a host of neat features including an adjustable visor open/close venting and rear light mount to create the ultimate city lid. Lightweight in-mould construction with extended skull coverage Full integrated Koroyd® core for superior energy absorption Removable visor provides integrated eye protection Controlled airflow cooling with easy open front vent system and top “air intake” vent One-hand micro-adjustment fit system Antibacterial fast wicking fabric padding Covered by Endura’s Crash Replacement Policy Certified to CE standard EN1078 and new NTA8776 Speed-Pedelec #ChooseLifeChooseBike
Endura Pro SL Helmet, with KoroydCrafted with the innovative Koroyd technology the Pro SL Helmet from Endura redefines the way we ride the road. Giving you the upper hand on your rivals, the impressive shock absorption and lightweight performance of this classically designed lid ensures that professional performance levels are simple to achieve.Just BreatheNo matter how intense your cadence becomes the Pro SL Helmet, with Koroyd will always have your back. Utilising angled Koroyd tubes and large vents to optimise ventilation, the flow of air around your head is increased to help reduce sweat and odours. Keeping you focused as you look to break up the road, Endura’s antibacterial fast wicking spacer fabric padding works wonders to keep you fresh and comfortable from the first pedal until the last.Koroyd® TechnologyTens of thousands of co-polymer extruded tubes, thermally welded to create an unparalleled consistent and fully engineered core, ready to be cut, shaped, cnc-ed, thermoformed or laminated and further integrated into the best sport and protection products that give you the edge. The cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%.Features:Super lightweight designIntegrated Koroyd® core for improved impact absorption without weight penaltyLarge vents with angled Koroyd® tubes for increased airflowFront eyewear dockOne-hand micro-adjustment fit systemAntibacterial fast wicking spacer fabric paddingCovered by Endura's Crash Replacement Policy and Endura Product GuaranteeCertified to CE Standard EN1078 + A1 02/201390 Day Satisfaction GuaranteeBuy Endura Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.