All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
The highest standards of protection in the lightest full-face helmet of all time. The Linea 01 MIPS full-face MTB helmet from Dainese sets a new benchmark. Offering maximum lightness for limitless pedalling, it is imperceptible to wear and meets the category's highest safety standards. Weighing just 570 grams (size M), the helmet exceeds all international standards, namely CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, and AS/NZ 2063.Fidlock fastening, certified in accordance with all international standardsDual-density EPS foam offers enhanced protection while reducing the weight amountAuxetic chin guard cagePolycarbonate outer shellExtreme field of viewAdjustable peakRemoveable and washable inner liningAnti-bacterial and anti-odour inner liningBreakaway auxetic peak30 Air intakes for limitless airflow (22 core + 8 chin guard)Helmet includes 2 liners, 2 sets of cheek pads and 2 neck rolls for a custom fitFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from impactsTwiceMe NFC Medical ID systemMaterials: Inner shell: 94% polystyrene. Outer shell: 1% PA66, 2% foam, 1% polyesterGreater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subjected and exposed to impacts. Robustness and rigidity are enhanced with an exclusive nylon exoskeleton inspired by the geometry of auxetic materials, which is embedded in the inner shell, starting from the EPS chin guard and extending across the cheek area. Its unmistakable structure allows for a continuous flow of air and helps contain the overall weight.Safety is in every detail. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The helmet is equipped with the NFC TwiceMe system that allows for the faster transmission of personal and health information, allowing for dramatically reduced rescue times.The desired ventilation is provided by 30 air vents: 22 on the central core and 8 rear extractors that guarantee a continuous flow and optimal heat exchange during every phase of activity, from the most extreme descents to the most intense pedalling and climbing. For a level of comfort that allows the rider to focus only on the path, riding without constraints due to the soft, anti-bacterial and anti-odour thermoformed lining.Visibility is perfect on any route and in all conditions due to the wide field of vision, a chin guard design that improves the line of vision even in more technical sections, and the solid yet flexible, tilt-adjustable peak, which can be operated with one hand and with gloves on. The form of the shell is designed to accommodate goggles when not being worn and is perfectly compatible with models in the Dainese MTB Goggles Line. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.Homologation: CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, AS/NZ 2063
The highest standards of protection in the lightest full-face helmet of all time. The Linea 01 MIPS full-face MTB helmet from Dainese sets a new benchmark. Offering maximum lightness for limitless pedalling, it is imperceptible to wear and meets the category's highest safety standards. Weighing just 570 grams (size M), the helmet exceeds all international standards, namely CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, and AS/NZ 2063.Fidlock fastening, certified in accordance with all international standardsDual-density EPS foam offers enhanced protection while reducing the weight amountAuxetic chin guard cagePolycarbonate outer shellExtreme field of viewAdjustable peakRemoveable and washable inner liningAnti-bacterial and anti-odour inner liningBreakaway auxetic peak30 Air intakes for limitless airflow (22 core + 8 chin guard)Helmet includes 2 liners, 2 sets of cheek pads and 2 neck rolls for a custom fitFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from impactsTwiceMe NFC Medical ID systemMaterials: Inner shell: 94% polystyrene. Outer shell: 1% PA66, 2% foam, 1% polyesterGreater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subjected and exposed to impacts. Robustness and rigidity are enhanced with an exclusive nylon exoskeleton inspired by the geometry of auxetic materials, which is embedded in the inner shell, starting from the EPS chin guard and extending across the cheek area. Its unmistakable structure allows for a continuous flow of air and helps contain the overall weight.Safety is in every detail. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The helmet is equipped with the NFC TwiceMe system that allows for the faster transmission of personal and health information, allowing for dramatically reduced rescue times.The desired ventilation is provided by 30 air vents: 22 on the central core and 8 rear extractors that guarantee a continuous flow and optimal heat exchange during every phase of activity, from the most extreme descents to the most intense pedalling and climbing. For a level of comfort that allows the rider to focus only on the path, riding without constraints due to the soft, anti-bacterial and anti-odour thermoformed lining.Visibility is perfect on any route and in all conditions due to the wide field of vision, a chin guard design that improves the line of vision even in more technical sections, and the solid yet flexible, tilt-adjustable peak, which can be operated with one hand and with gloves on. The form of the shell is designed to accommodate goggles when not being worn and is perfectly compatible with models in the Dainese MTB Goggles Line. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.Homologation: CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, AS/NZ 2063
If your mountain biking preference is to ride light but still want reliable knee protection when fast and technical trails might catch you out, the Trail Skins Lite Knee Guards are a great pick. The soft and flexible Pro-Shape 2.0 protector allows maximum on-the-bike mobility and pedalling performance, letting you enjoy mountain bike trails without being held back by cumbersome kit. However, the innovative protector, inspired by auxetic materials - materials that expand in all directions simultaneously when hit, absorbing damaging impact forces - provides superb crash protection, soaking up impacts should you hit the dirt. In fact, this protector absorbs up to 83% of the force of an impact, rather than transmitting this to your knee. Meanwhile, the jersey hole fabric of the guards allows your skin to breathe and wide grippers, with silicone, keep the Trail Skins Lite securely in place even during the rowdiest of mountain bike rides. And should you want to stash your guards, the guards come complete with a practical elastic-strap included in the pack. This allows the guards to be attached to the frame. Stow them away when pedalling uphill and they're safe and ready to go for when you're hitting the grin-inducing downhills.
When you're mountain biking there's a high possibility you'll have a crash or two. And here the Trail Skins Air Knee Guards ensure a crash doesn't end your ride prematurely with beaten up knees. Protection is via the Pro-Shape 2.0 protector. This is inspired by auxetic materials - materials that expand in all directions simultaneously when hit, absorbing damaging impact forces - in fact, this protector absorbs up to 83% of the force of an impact, rather than transmitting this to your knee. Side sliders also bolster protection when you're skidding along the ground. The result of this is, you can keep enjoying your ride even after a tumble. Not only is the Air Knee extremely protective, but it's also light, flexible and airy too. The structure of the pad gives excellent flexibility, allowing you to pedal easily and move and react to the ever-changing terrain beneath your wheels. Some 55% of the guard is open surface too, bringing you increased ventilation on the downhills and greater heat-exchange and breathability when pedalling back up the hill. An ideal feature for riders who plan to take on long rides, even on the hottest of days. Last but by no means least, the jersey hole fabric of the guards allows your skin to breathe and wide grippers, with silicone, keeps the Air Knee Guards securely in place even during the rowdiest of mountain bike rides.
The Trail Skins Pro Knee Guards provide the ideal balance of reliable knee protection, superb flexibility and free-flowing ventilation. The excellent level of protection come by the way of the carbon-elastomer compound and ergonomic shape of the Pro-Shape 2.0 protectors. These absorb and dissipate impact forces while the smooth side pads reduce friction and allow smooth sliding should you fall. Flexibility is guaranteed through the ergonomic design, mapped to follow the motion of the knee when you're pedalling. A second-skin-like fit is offered via the highly breathable sock while perforated zones allow for ventilation as the heat rises. Thigh and calf straps create a firm hold and keep your pads in place as you move and change your riding position.
The Trail Skins Pro Elbow Guards provide the ideal balance of reliable knee protection, superb flexibility and free-flowing ventilation. The excellent level of protection come by the way of the carbon-elastomer compound and ergonomic shape of the Pro-Shape 2.0 protectors. These absorb and dissipate impact forces while the smooth side pads reduce friction and allow smooth sliding should you fall. Flexibility is guaranteed through the ergonomic design, mapped to fit naturally to your arms and let you move freely and easily when piloting your mountain bike over rough terrain. A second-skin-like fit is offered via the highly breathable sock while perforated zones allow for ventilation as the heat rises. Thigh and calf straps create a firm hold and keep your pads in place as you move and change your riding position.
For ambitious young mountain bikers who are forever testing their skills and the limits of tyre grip, a crash or two is an inevitable part of their biking life. But with the flexible protection of the Scarabeo Pro Junior Elbow Guards, they'll be confident to keep pushing their progression, safe in the knowledge they're covered when they hit the dirt. Protection Inspired by Nature Inspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements body movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your elbow from injury in a crash. Lightweight and Breathable The sleeve of the Scarabeo pad is made from a lightweight and breathable fabric for outstanding riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool, even on the warmest of days and during the rowdiest of trail-riding sessions. With wide elastic bands and silicone grippers to the upper and lower, these are pads that will also firmly stay put, no matter how rough the terrain and how much young mountain bikers move.
Slip the Trail Skin Armour Shorts under your regular mountain bike trousers or baggy shorts and you'll benefit from the extra comfort and protection they give. The knitted body-mapped construction and minimal seams ensure a smooth, flexible and lightweight feel that moves with you as you pedal and manoeuvre your bike. The synthetic fibres also deal quickly and efficiently with sweat, keeping you dry even during warm days and intense riding sessions. When you're on the saddle, the built-in seat pad provides extra support to your sit bones and eases pressure and vibrations as you hit rougher trails. To the outside of the thighs, pads provide extra protection during a slide along the ground - something that is a fact of life as you push tyre grip and lean angles further and further.
When your focus is on fast lines, fast times and the fast weight shifts needed to meet the demands of mountain bike racing and trail slaying, the Rival Pro Knee Guards come into their own. Whether it's an extreme descent or an ascent to the start of your next enduro stage, you get the benefits of optimal freedom of movement and reassuring levels of protection when it all goes wrong. Packed with Protection Inspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your knee from injury in a crash. But that isn't all, the Rival Pros also feature extra protection by the way of a central steel plate. Inspired by MotoGP suits, this increases protection against the sharp piercing impacts of rocks and roots and adds excellent slide properties useful in the case of a skid. Pads to the outer of the calf also add extra protection in the event of a crash. Lightweight and Breathable The sleeve of these pads is made from a lightweight and breathable perforated fabric for outstanding riding comfort. With 45% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days and rowdiest of trail-riding sessions. When you're taking on the roughest and most challenging of trails, the snug-fitting sleeve that extends to the thigh and an elastic calf gripper, with silicone, ensures the Rival Pros remain securely where they should be. No slipping, more focus on the ride.
If you're stepping up your mountain bike game, then there's every chance you'll be taking some time to involuntary lie down on the dirt - that is to say, you'll be crashing. And when that happens, the Trail Skins Air Elbow Guards provide elbow protection you can trust. Inspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your elbow from injury in a crash. The sleeve of these pads is made from a lightweight and breathable fabric for outstanding riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days and rowdiest of trail-riding sessions. When you're rocking and rolling over rough terrain, the snug-fitting sleeve that extends to the bicep and an elastic forearm gripper, with silicone, ensures the Trail Skins remain securely where they should be.
For ambitious young mountain bikers who are forever testing their skills and the limits of tyre grip, a crash or two is an inevitable part of their biking life. But with the flexible protection of the Scarabeo Pro Junior Knee Guards, they'll be confident to keep pushing their progression, safe in the knowledge they're covered when they hit the dirt. Protection Inspired by Nature Inspired by the geometry of auxetic materials present in nature, dissipating forces in all directions when impacted, the Pro-Shape 2.0 protectors offer flexible protection that complements body movements rather than hinders them. In fact, Dainese claims the Pro-Shape 2.0 elbow zone will absorb up to 83% of the force of an impact, protecting your elbow from injury in a crash. Lightweight and Breathable The sleeve of the Scarabeo pad is made from a lightweight and breathable fabric for outstanding riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool, even on the warmest of days and during the rowdiest of trail-riding sessions. With wide elastic bands and silicone grippers to the upper and lower, these are pads that will also firmly stay put, no matter how rough the terrain and how much young mountain bikers move.
The most versatile torso protection in the Dainese line, the Trail Skins Pro Armour Tee provides impact protection in those areas of your upper body most vulnerable during a crash. Inspired by the geometry of auxetic materials present in nature, the Pro-Shape 2.0 protectors offer flexible protection that complements your movements rather than hinders them. The protectors are also removable, letting you tailor when and where you want protection, while also making it easy for cleaning. The tee itself is made from a lightweight and breathable fabric for utmost riding comfort. With 55% of the structure of an open design, you can look forward to excellent ventilation to keep you cool on even the warmest of days. The extended length also makes it simple to tick into your MTB pants/shorts. Two rear pockets complete the package, letting you carry your essentials close to your body without the bulk of a backpack or waist pack.
The Linea 01 MIPS Full Face MTB Helmet makes use of a dual-density EPS inner, with a mapped design to provide targetted protection to those areas most susceptible to crash impacts. Meanwhile, the tough polycarbonate outer shell offers long-term durability and protection against lighter impacts - think branches and bushes along the trail. Structural strength and rigidity are enhanced by a nylon exoskeleton embedded within the inner shell. This starts across the chainguard and across the cheeks. This keeps weight low without sacrificing protection. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here NFC (Near Field Communication) Medical ID Device Included with the helmet is another layer of safety via an NFC TwiceMe system. Should you become incapacitated after a crash, this device gives first responders access to faster personal and health information transmission, allowing for dramatically reduced rescue times. Go with the Flow While you're mountain biking, you'll be generating some heat. But thanks to 29 carefully positioned vents, the Linea optimises airflow, ensuring you don't overheat. An anti-bacterial and anti-odour liner also makes for a fresh ride, every time. And when you need that new helmet feel, it's removable and washable too. Ride Ready Dianese have designed the Linea so that your vision of the trails remains clear and unrestricted. The chin guard is engineered not to get in your line of sight and the adjustable peak is easily adjusted with one hand so as to allow the perfect field of view. Fast and secure fastening is ensured by the Fidlock® magnetic system, which can also be operated while wearing gloves.
The Dainese Rival Knee Guard R is designed to offer maximum resistance and protection. Built with Armoform technology, with sliding polyethylene plates, the Dainese Rival Knee Guard R offers great impact dispersal and puncture protection. Meanwhile, the hybrid crash absorb protector extends across the shin, helping to protect against impacts with pedals, stones, or any objects thrown up by the front wheel, or front rider.