The Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding. Wave Tech Chainrings Tough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions. Press Fit BB-90 Bottom Bracket This chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe. Manufacturer's Part Numbers: 89222988 Black 36/26T 170mm 89222989 Black 36/26T 175mm
The Omm Meridian Beanie is built for cold-weather performance and offers exceptional warmth for its weight. Crafted from breathable and moisture-wicking stretch fleece fabric with headband constriction to hold it securely and flatlock seams to eliminate any chafing. Finished with sculpted ear warmers for enhanced comfort and extra warmth where you need it most.
Reviving the first ever Gore-Tex jacket from 1985, this Shakedry garment continues to stamp GOREWEAR’s reputation on the cycling industry, and is certain to infuse any ride with style and grace. Extremely lightweight, the outer active membrane is entirely waterproof, with water simply running off the jacket to keep you bone dry. Allowing you to shake off any moisture, this extremely breathable jacket also sports reflective details to keep you visible when the light starts to fade.
Ready for top-performance, the Kappa Evo features a nylon fibre injection base which keeps you poised and stable as you race for the podium. Furthermore, its CrMo rails deliver amazing toughness, making it a robust component for tackling the most challenging of events. Weighing in at only 260g, this is an ideal choice of upgrade for riders who want a saddle with an amazing strength to weight ratio.
Designed for both male and female riders.
Designed to beat the chill and keep you safe when cycling in the winter months, dhb kicked off their development of the Aeron FLT Roubaix Bib Tight 2.0 by sourcing an upgraded Roubaix fleece fabric to deliver enhanced warmth when temperatures tumble. The super soft and supportive bib straps also feature an advanced Roubaix fleece lining, while a mesh centre back panel delivers crucial breathability to ensure you won't overheat when you're chasing those winter gains. Durable and sustainable, all fabrics are bluesign® APPROVED. Showers and road spray are inevitable on winter rides, so dhb have applied a durable water repellent (DWR) treatment to these bib tights for added protection. An larger dhb logo featuring Flashlight Technology has been strategically placed on the right thigh, while reflective calf chevrons deliver further visibility. dhb always pay close attention to the finishing touches and it's no different here. You'll find branded trims on the bib straps and a super stretchy zigzag stitch on the leg openings – ensuring a secure and comfortable fit every time. Elastic Interface® PARIS HP MEN chamois The benchmark for performance in the dhb range, three densities of foam deliver exceptional comfort while reducing unnecessary bulk. Maximised for extended periods on the drops, this customised seatpad has been designed to keep you riding all day. Flashlight Technology (FLT) FLT is all about the strategic placement of high-quality reflective details. Using knowledge gained from the Flashlight commuter collection, dhb now incorporates these industry-leading technologies into their performance road cycling collections. bluesign® APPROVED fabrics A sustainable textile solution, the bluesign® system removes harmful substances from the beginning of the manufacturing process and controls standards for environmentally friendly production. Fabrics that have been assessed and sustainably produced are designated as bluesign® APPROVED. dhb Aeron collection dhb’s most extensive performance range, these products are engineered to protect athletes in all conditions and keep them riding at optimal body temperature. Aeron products are built to last, using the best technical fabrics and incorporate tried-and-tested construction techniques. Each design is fine-tuned to provide minimal distractions and maximum comfort.
The OMM MountainFire 15 Vest combines a tailored fit with cutting-edge fabrics to create a stabilised carry system throughout your run. Engineered with stretch mesh, the vest holds the kit close to your body, helping to reduce bounce. Fitted with 7 large stretch mesh pockets, on the front, and large roll-top pouch, at the rear, the vest provides extensive and versatile storage. The pack’s rear is also fitted with a compression system that helps keep your gear in place while you run. Specifications Leanweight: 245g Capacity: 15 litres
The Beta Fuel gels each provide 40g of carbohydrate with an enhanced 1:0.8 ratio of maltodextrin to fructose. This new and improved formula increases your body’s carbohydrate usage efficiency, and limits gastrointestinal discomfort to deliver a scientifically superior fuel. Directions for Use Depending on your sport or event, you should aim to consume 1-3 gels every hour during exertion to reach an 80-120g target intake. In some circumstances, such as cold weather, it may be necessary to consume more. Simply tear off the top of the packaging and squeeze the contents into your mouth as and when required.
The Beta Fuel Energy Chew has been scientifically formulated to be a superior fuel in a satisfying chew form. Each chew contains 46g of carbohydrate, with an improved 1: 0.8 ratio of maltodextrin to fructose, which increases the percentage of ingested carbohydrate that is oxidised (known as efficiency). This unique ratio also helps to minimise gastrointestinal discomfort. Directions for Use Each chew bar contains 46g of carbohydrate. Depending on your sport or event, you should aim to consume 1 to 3 chew bars every hour during exertion to reach an 80 to 120g target intake. In some circumstances, such as cold weather, it may be necessary to consume more. Simply tear off the top of the packaging and squeeze the contents into your mouth as and when required.
Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
This quality full-suspension bike features an alloy frame with 160mm-travel front and rear, RockShox 35 Gold forks, a Marzocchi Bomber rear shock and a Shimano Deore M6100 12-Speed groupset with a wide-ranging 11-51-Tooth cassette and hydraulic disc brakes. Plus, it rolls upon 27.5" Octane One Solar rims wrapped in Schwalbe BikePark tyres, giving you performance and control for riding any trail with confidence. RockShox 35 Gold Forks and Marzocchi Bomber Rear Shock Equipped with RockShox 35 Gold forks and a Marzocchi Bomber CR rear shock, this all-mountain warrior makes sure you stay stable and upright anywhere on the mountain. Ensuring you blast up and down the mountain with the greatest control, this suspension setup has 160mm of travel at the front and 160mm at the rear, providing you with an ultra-smooth performance that's ideal for riding rough terrain in wet and slippy or dry and dusty conditions. Shimano Deore M6100 12-Speed Groupset and Hydraulic Disc Brakes Powering you with the greatest efficiency and pace is a 12-Speed Shimano Deore M6100 drivetrain. This bike’s gearset provides a super-smooth, precise and satisfying shift as you click through the gear range. Plus, it's equipped with Shimano MT410 hydraulic disc brakes, giving you a powerful and dependable all-weather braking performance. Octane One Solar Rims and Schwalbe BikePark Tyres This exceptional off-roader rolls with Octane One Solar 27.5” rims to give you superb rolling speeds and agility suited to modern enduro racing. Plus, it has Schwalbe Dirt Reynolds BikePark tyres that are Tubeless Ready and feature 2.4" wide casing for the greatest rolling speed, grip and reliability. The NS Bikes Define AL 160 Suspension Bike provides you with power, agility and control and gives you the confidence to push yourself towards the pinnacle of the podium. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Specifically developed for today's triathlon racers, this tri saddle is equipped with a hard-wearing microfibre cover with a water-based coating, which makes it great at handling the pressure from racing in all-weather conditions. Repente has also kitted out this version with an impressive long carbon fibre (LCF) shell for the best balance of stiffness and strength, without adding any unnecessary excess grams to your ride. Another highlight is its carbon fibre rails, which keep you firmly held in place as you put the power down, while also keeping weight reduced to a minimum. With a hidden central relief zone relieving pressure from around your sit bones and comfortable polyurethane foam padding keeping you supported, this is an ideal choice for the demands of triathlon racing. Comfortable Triathlon Saddle The anatomical shape of the Repente Spyd 2.0 triathlon (tri) saddle has been designed to provide comfortable Ischium support in the different pedalling positions, especially for those who like to spend many hours on their bikes. The Spyd 2.0 is the saddle for the rider who seeks the ideal balance between performance and comfort, as well as caring about aesthetics. The structure is reinforced with Long Carbon Fibres (LCF), oriented lengthwise. The quality/price ratio makes the Spyd 2.0 triathlon saddle unique in its market segment. Carbon Fibre Saddle Rails The saddle rails are entirely comprised of unidirectional T-700 carbon fibre, while for the main base, Repente’s R&D department used its renowned Long Carbon Fibres (LCF) technology. Instead of plain carbon fibre “chops”, longer carbon fibres are added to the resin, which thanks to a special injection process, are arranged to match the longitudinal flow of the material until they form a weave that increases the strength of the structure. The ergonomic features and materials used for the rail (T-700 carbon fibre) and the polyurethane (PU) padding are the same as in the Spyd TPX version. Repente Locking System (RLS) The Repente Locking System (RLS) allows the cover to be interchangeable in one simple and safe operation. While maintaining the same base, different models can be fitted to suit your needs. If the cover gets damaged you don’t need to replace the whole saddle. Comfort is provided by the central channel and by the ergonomic shape. Resistant to torsional deformation, the Repente Spyd 2.0 Saddle will let you find your most natural position on the saddle. Width: All Repente saddles take into account the conventional anatomical centre to position and shape: 1) The best point of contact of the ischium bones (sit bones) for comfort and ideal the position for performance. 2) The outline shape of the front of the saddle gives freedom of movement to the legs. Repente saddles with more traditional shapes such as the Spyd, are designed with the nose area typically narrow, so there are no issues from legs rubbing on the edges. In order to maintain the supporting function of the nose, Repente work with the highest quality of padding and their research and experience allows them to judge perfectly the quantity of padding to avoid any rider discomfort. Please note: Make sure your seatpost clamp is suitable for 7x9mm rails. The Repente carbon rails measure 7x9mm, so the seatpost clamp must accommodate this configuration. Please make sure that your bike has a seatpost clamp suitable for this measurement: the traditional 7mm clamp for round rails will not work. Manufacturer's Part Number: RP-ASS200-1300BK