This mountain bike (MTB) crankset features a trail-rated, compacted carbon fibre crankarm construction, which offers a fantastic balance of stiffness and durability while also keeping weight to a minimum. e.thirteen has also kitted out its World-Cup DH-rated layup and construction with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance. This makes it more than ready for tackling the most demanding of terrain conditions as you weave from trail to trail. Trail-Ready MTB Crankset with Adjustable Chainline In contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of this Gen4 model has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor. Manufacturer's Part Number: E13CR2010 Black 165 x 73mm E13CR2011 Black 170 x 73mm E13CR2012 Black 175 x 73mm
Marking a new chapter of one of the most successful products of the historical Italian company, this saddle features a high-quality silkfeel cover that's designed to handle the increased pressure from long days out on the road. Selle San Marco has also kitted out this model with a glass fibre reinforced shell for increased rigidity, toughness and support as you clock up the miles. Another highlight is its generous rear support, which makes it ideal for athletes who rotate their pelvis a lot whilst pedalling and as a result, move closer towards the handlebars. Road Bike Saddle with Manganese Rails Prepared for wherever your next road bike journey takes you, this saddle comes kitted out with manganese rails for increased resistance against wear and vibrations. This means you'll enjoy a smoother and more controlled ride thanks to this model's enhanced characteristics. Pullfoam Padding and Maximised Central Cut Out No stranger to the finer details, this road bike saddle is developed for comfort and support on every mile. Selle San Marco has equipped it with dependable pullfoam padding, which uses low density foam with a variable thickness structure to follow the movements of your pelvis when pedalling, for guaranteed comfort, long lasting resistance and ideal support. In addition, the Selle San Marco Shortfit 2.0 Dynamic Saddle comes complete with a maximised central cut out to relieve pressure from around your sit bones, so you can go the extra distance with maximum comfort. Manufacturer's Part Numbers: SMS287MN401 Black Narrow (S3) SMS287MW401 Black Wide (L3)
This drop handlebar tape is specifically designed for the demands of modern road cycling. It features a non-allergenic, multi-layer plastic fibre construction, which allows it to deliver the best balance of grip, smoothness and low weight performance for your steering setup. Repente has also kitted out this model with an extremely resistant, high grip polyurethane surface coating, giving you a tacky and supportive feel in all-weather conditions. Manufacturer's Part Numbers: RP-BTT200-0600BK Black 2.0mm RP-BTT200-0600WH White 2.0mm
A totally new type of responsibly-built outdoor shoe, the Haglofs Duality AT3 Hiking Boots are driven by innovation and versatility. Made with recycled materials, making them an eco-friendly choice for the eco-conscious explorer, they are built with recycled Polyester alongside premium leather from a tannery audited by the Leather Working Group. Furthermore, they feature an innovative exchangeable midsole, this provides a softer shoe for daily use and a harder one for rougher terrain or heavier loads for optimum versatility. Additionally, a Durable Water Repellent treatment keeps feet dry when the weather changes, while reinforcement at the toe and heel ensures day-long, long-lasting durability.
Developed to raise the benchmark higher than current market standards, this drop handlebar tape is designed for maximum grip and reliability on your road bike. It features a non-allergenic multilayer plastic fibre construction, which offers premium lightness and elasticity as well as vibration damping characteristics. Repente has also kitted out this model with EVA shock absorption for extra comfort and stability as you tackle the more demanding of road conditions on your ride. Another highlight is its polyurethane surface coating, which provides high-grip properties and extreme resistance for increased longevity. Manufacturer's Part Numbers: RP-BTT300-0600BK Black 3.0mm RP-BTT300-0600WH White 3.0mm
If you love the challenge of big mileage rides or a mountainous Gran Fondo, the Women's GT 2.0 Bib Shorts are your perfect cycling companion. Ale uses a mix of performance fabrics in order to give perfect muscle support and compression alongside excellent flexibility for fluid pedalling. Premium Performance Materials Zaffiro and Matrix fabrics, both Lycra® Power materials, gently squeeze your hard-working muscles, encouraging blood flow and flushing out lactic acid, providing fatigue-busting support over long rides. Matrix, in particular, offers excellent abrasion resistance and is deployed in the areas of the short in contact with the saddle, boosting durability. Elsewhere, Ale uses their Mesh Dragon material. This micro-mesh is supremely soft and allows for optimal breathability. An Open Bib design also exposes more skin to the back of the shorts, allowing for greater sweat evaporation. When you’re pushing hard on the peals this will ensure you’re not left drenched in sweat. For rides that stretch from the low light of a summer morning to the glow of sunset, reflective leg grippers keep you visible on the road. Women’s 8HF Seat Pad Inside, the Women’s “W8HF” pad utilises an elastic microfibre with memory padding, strategically positioned at the saddle contact points for maximum comfort. In the perineal and ischiatic area, higher density 120kg/m³ padding ensures the very best support on the saddle and vibration-damped comfort across even the roughest of roads. Meanwhile, a central relief channel protects sensitive nerve endings while lateral shaped flexible wings follow the body for complete freedom of movement and comfort when pedalling
Developed for wherever your next ride takes you, this saddle comes kitted out with a high-quality microfibre cover and a water-based coating to keep you supported in all-weather conditions. Whether you're tackling mile after mile of road or spending the day on your favourite MTB trails, this model's impressive long carbon fibre (LCF) shell ensures the best balance of stiffness and strength, without any weight penalty. Another highlight is its lightweight carbon fibre rails, which keep you securely held in place as you put the power down. Weighing in at only 165g, this is an ideal choice of upgrade for a wide range of riders who want maximum performance without adding any unnecessary excess weight. EVA Padding and Central Relief Channel The saddle is aimed at cyclists who prefer a shell without an anatomical opening. Its channel is designed to relieve perineal pressure by using a wider profile that runs along the whole length of the saddle. Another benefit is it also meets the specific needs of female riders with improved comfort and thicker EVA padding. Carbon Fibre Saddle Rails The saddle rails are entirely comprised of unidirectional T-700 carbon fibre, while for the main base, Repente’s R&D department used its renowned Long Carbon Fibres (LCF) technology. Instead of plain carbon fibre “chops”, longer carbon fibres are added to the resin, which thanks to a special injection process, are arranged to match the longitudinal flow of the material until they form a weave that increases the strength of the structure. Repente Locking System (RLS) The Repente Locking System (RLS) allows the cover to be interchangeable in one simple and safe operation. While maintaining the same base, different models can be fitted to suit your needs. If the cover gets damaged, you don’t need to replace the whole saddle. Comfort is provided by the central channel and by the ergonomic shape. Resistant to torsional deformation, the Repente Spyd 3.0 Saddle will let you find your most natural position on the saddle. Please note: Make sure your seatpost clamp is suitable for 7x9mm rails. The Repente carbon rails measure 7x9mm, so the seatpost clamp must accommodate this configuration. Please make sure that your bike has a seatpost clamp suitable for this measurement: the traditional 7mm clamp for round rails will not work. Manufacturer's Part Number: RP-ASS3M0-2101BK
This versatile saddle features a hard-wearing microfibre and polyurethane (PU) cover, which makes it suitable for handling the increased pressure from riding with your local road club or taking on a day-long adventure on your gravel bike. Repente has also equipped this model with a water-based coating, so whatever your riding discipline, you'll always stay comfortable and supported in all-weather conditions. Another highlight is its carbon fibre shell and saddle rails, which ensure maximum strength and durability while keeping the weight reduced to only 145g. As a result, it's a great choice of upgrade for maintaining a comfortable, aerodynamic riding position without worrying about weighing down your ride with unnecessary excess grams. Compact Road Bike Saddle By trimming the weight of this saddle down to only 145 grams and creating the entire structure by autoclave processing, Repente was able to ensure a more compact and uniform carbon fibre texture, enhancing the mechanical properties of the material as no other machining process can do. Latus CL has a flattened rear surface to offer the best support even in the case of very far apart ischial tuberosities (“sit bones”). The curvature between the wider part of the saddle and the more tapered front has been designed to guarantee maximum freedom of leg movement and to avoid any inner thigh chafing. Viewed from the side, the upper profile of the saddle has a slight central gap, whose purpose is to help cyclists maintain the most comfortable riding position preventing any sliding forward. Super-Lightweight EVA Foam Padding Extra padding made of EVA, a high-performance material, ensures support all the way to the front, avoiding discomfort and numbness even when riding in an aerodynamic position. The Repente Latus CL is the ultimate saddle to meet the needs of users who are after a wider saddle. Please note: Make sure your seatpost clamp is suitable for 7x9mm rails. The Repente Latus CL Saddle's carbon rails measure 7x9mm, so the seatpost clamp must accommodate this configuration. Please make sure that your bike has a seatpost clamp suitable for this measurement: the traditional 7mm clamp for round rails will not work. Manufacturer's Part Number: RP-ASLL00-1207BK Black 240x152mm
All set for day-long adventures exploring countryside backroads, this gravel bike saddle comes equipped with a special non-slip, water-based microfibre cover, which is just as effective when wet. This makes it more than capable of keeping you supported as you clock up the miles on demanding mixed terrain conditions. Repente has also kitted out this model with a carbon shell and unidirectional (UD) carbon fibre rails for an excellent balance of stiffness and durability, without adding any unnecessary excess grams to your ride. Coming complete with super-lightweight EVA foam padding and a range of performance-enhancing technologies such as a central relief channel, this is a perfect choice of upgrade for conquering your next gravel ride. Gravel Bike Saddle with Carbon Fibre Rails Repente was among the first manufacturers to create saddles with specific anatomical and ergonomic features for gravel riding. The brand analysed cyclist postures, the environments in which gravel bike riding takes place, the geometries of the frames and the design of the bike components. In addition to this, their R&D department has relied on valuable collaboration by today's top-performing athletes (Repente is the official sponsor to the Rodeolabs Pro Gravel Team and Alta Marca Gravel). This study has led to Artax GL, a non-deformable reinforced carbon fibre saddle with all the qualities required to make a gravel biker happy. Given the pedalling position, which is more vertical than on a racing bike, Repente has perfected the design and increased the thickness of the padding, without however affecting in any way the slender, stylish design of the saddle. Central Relief Channel and Curved Tip Profile The rear part ensures comfortable support for the rider even after many hours, while the central anatomical opening effectively relieves any pressure on the perineal area. The shape of the front minimises friction on the leg and allows maximum freedom of movement. Thanks to the curved tip profile, cyclists can pedal standing up and then go back to the sitting position seamlessly. Gravel is fun, relaxation, exploration: get ready to enjoy this new, breakthrough cycling experience with Repente Artax GL. Please note: Make sure your seatpost clamp is suitable for 7x9mm rails. The Repente Artax GL Saddle's carbon rails measure 7x9mm, so the seatpost clamp must accommodate this configuration. Please make sure that your bike has a seatpost clamp suitable for this measurement: the traditional 7mm clamp for round rails will not work. Manufacturer's Part Numbers: RP-ASXG00-0000RV Red Mud 275x132mm RP-ASXG00-0000BK Black Mud 275x132mm
Whether you're looking to improve your balance, you're recovering from an injury, or you're trying to intensify your existing workout by targeting a wide range of muscles during exercise, this multipurpose balance board from BeElite is sure to deliver results. The board has a large 40cm surface area to easily stand on and features anti-slip circular grooves for superior grip and stability when standing. The robust PP plastic construction is built to withstand the rigours of heavy use. Target a wide range of muscle groups by performing push-ups, squats and other exercises with the balance board. Adjust your weight and maintain your balance will challenge your muscles for a more intense workout.
Specifically developed for male and female cyclists who prefer a wider platform, this saddle comes equipped with a 142mm width for maintaining a comfortable and stable riding position. Whether you're into road cycling or gravel adventure riding, its hard-wearing microfibre and polyurethane (PU) cover also makes it more than capable of handling the increased pressure that's associated with long-distance rides. Another highlight is its carbon fibre shell and saddle rails, which offer a fantastic combination of stiffness, durability and low weight performance as you clock up the miles. Coming complete with super-lightweight EVA foam padding, this is a perfect choice of upgrade for benefitting from increased comfort and support, wherever your next ride takes you. Central Channel and EVA Foam Padding Viewed from the side, the upper profile of the saddle has a slight central gap that's designed to help cyclists maintain the most comfortable riding position, preventing any sliding forward. The wide longitudinal anatomical channel that runs down this saddle's middle section is shaped to ensure adequate support even in the seat tip area. The anatomical channel reaches its maximum depth where this is most useful to help ease pressure on your perineal area. The curvature between the wider part of the saddle and the more tapered front has been designed to guarantee maximum freedom of leg movement and to avoid any inner thigh chafing. Extra padding made of EVA, a high-performance foam material, ensures support all the way to the front, avoiding discomfort and numbness, even when riding in an aerodynamic position. Please note: Make sure your seatpost clamp is suitable for 7x9mm rails. The Repente Latus M Saddle's carbon rails measure 7x9mm, so the seatpost clamp must accommodate this configuration. Please make sure that your bike has a seatpost clamp suitable for this measurement: the traditional 7mm clamp for round rails will not work. Manufacturer's Part Number: RP-ASL200-1207BK Black 240x142mm
The Kraftform Kompakt 60 KK Toolset features a workshop quality T-handle screwdriver set that features an ergonomically designed handle for comfortable performance throughout use. It also comes with a 17-piece bit set that is ideal for working on road bikes, mountain bikes (MTB) and electric bikes (E-Bike) and is a superb addition to any workshop or toolbox. Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage. Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece. Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck Wera torque screwdriver. Variable torque setting option with the highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value: audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive. 851/4 Z bits High-quality bits for Phillips screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 855/4 Z bits High-quality bits for Pozidriv* screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders. * Pozidriv = registered trademark of European Industrial Service Ltd. 867/4 Z Torx BO bits with borehole High-quality bits for recessed Torx screws. Torx BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special BO tools have a borehole to take up the pin. Tough viscous for universal use. 1/4" hexagon, suitable for holders. 800/4 Z bits Tough viscous Wera bits for slotted screws for universal use. 1/4" hexagon, suitable for holders. 840/4 Z bits Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. 1/4" hexagon, suitable for holders.