The original Bambino TT aero helmet was the result of a collaboration between Kask and Team Sky - a bike helmet developed for extreme road, triathlon and track cycling performance. The Bambino Pro is an update of this iconic design and retains some of the features that made the original so popular whilst incorporating some improvements to make this Kask's most aero helmet yet. The shape has been revised following extensive wind-tunnel testing so the maximum aerodynamic advantage is guaranteed. Ventilation is ensured by six micro air-intakes on the front and four exhaust vents in the rear, connected through an internal air duct system. The Coolmax inner padding can be removed and washed easily. Further comfort is provided by 3D DRY padding which transports moisture away from your skin thanks to lightweight, multi-layered construction. The old rear Velcro strap has been replaced with Kask's innovative Octo-Fit system which cradles your head and allows you to perfectly adjust to the fit to your unique shape and the chin-strap features the soft, hypoallergenic leatherette finish popular across their higher-end range. The magnetic visor is integrated into the helmet thanks to a completely redesigned magnet system that allows the magnets to be located into small lugs securing the visors in position with a firm click. Its total adherence to the helmet allows continuous airflow and greater aerodynamics. The visor can easily be removed and replaced while riding. 3D DRY The tri-dimensional 3D DRY padding utilizes a multi-layer open cell construction process: the best technology for the optimal comfort and performance. Aero Control Incredibly aerodynamic and top-performing shell, tested in the wind-tunnel and able to provide a really impressive CX rate. The outflow of the air will be perfectly in line with the helmet in any head position. Removable Padding Coolmax Removable and washable inner padding in Coolmax® material ECO Chinstrap Chin pad with eco-leather chinstrap The anallergic and washable chinstrap is extremely comfortable and helps to avoid irritation of the skin MIT The MIT Technology, applied to all KASK cycling helmets, guarantees a higher safety and a complete protection thanks to the polycarbonate layer that covers the shell on the top, on the base ring and the back. Magnetic Visor The innovative magnetic visor is patented by KASK and integrated to the helmet thanks to a five magnets’ system. The total adherence of the visor to the helmet allows continuous airflow and a great aerodynamic advantage. SL Spacers The chin strap incorporates soft lateral spacers, which thanks to their shape, enable excellent ventilation and avoid that unpleasant sweaty strap feeling.
The TSG Sentinel is built with a super-tough ABS outershell making it possible to build a sleeker more solid silhouette with the added strength of a toughened PC-laminated EPS foam protective face guard. It features 12 vents to maximize airflow through the helmet at all speeds and vent out hot air towards the rear of the helmet. A wide eyeport with precision placed visor deliver superior vision and accommodate a wide range of premium goggles for riding. To top it off, the Sentinel's comfort liner and cheek pads are removable and washable, so however hard the helmet is ridden it can be kept as fresh as when it came out the box. Size guide: X-Small: 52 - 53cm Small: 54 - 55cm Medium: 56 - 57cm Large: 58 - 59cm X-Large: 60 - 61cm XX-Large: 62 - 63cm
When you're launching yourself down steep rocky chutes, whipping it over huge gap jumps, ripping over rooty singletrack and generally pushing and progressing with your mountain bike skills, it's a given that at some point you'll crash. And when that happens you'll be glad of the protection of the MTB 4.0 Helmet. Head protection comes by way of a host of features. It starts with the DH certified Lightweight Polymer Compound Shell. This absorbs the knocks and scrapes you'd expect of regular mountain biking. This tough and durable covers in-moulded EPS + EPO impact foam. In the event of a crash, this combination does a brilliant job of soaking up and dissipating the harmful forces associated with head impacts. The visor is also tuned for safety. It's designed to breakaway in the event of a crash, reducing rotational forces on the head and neck. Talking of the neck, this helmet is neck brace compatible. 360 ̊ Turbine Technology The 360 ̊ Turbine Technology is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Sweat-Busting Ventilation When you're taking on challenging mountain bike trails and downhill races it's not just the safety features that will impress. Ventilation is also excellent. A total of 23 vents and inner air channels creates highly effective cooling airflow over your head. And for uphill pedals or when you want a boost to ventilation, the mouthpiece is also removable. Getting sweaty is pretty inevitable though. And the moisture-wicking Dri-Lex® liner helps in this regard, keeping sweat away as you warm up. Being anti-dour and washable too, you'll enjoy freshness every ride. A Fidlock magnetic closure system makes securing the 4.0 super easy too.
The Protone Icon Matte Road Helmet (WG11) has had a redesign, with subtle changes to venting to boost airflow, an improved fit system that's now more comfortable and secure and tweaks to aesthetic design details to bring it right up to date. What hasn't changed is the superb head protection on offer and that race-winning combination of comfort and aerodynamics. Multi In-Moulding Technology From the safety point of view, you'll continue to benefit from Kask's Multi In-Moulding Technology. This sees a durable but lightweight polycarbonate shell fused to the shock-absorbing EPS foam inner. In the event of a crash, this works to dissipate harmful forces that could otherwise cause serious injury. The protective foam is also reinforced internally, providing extra strength and ensuring structural integrity should you be unfortunate enough to fall. WG11 Safety Testing Protocols The Protone also exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike OctoFit+ Retention System With the OctoFit+ retention system, you can dial in the fit of your Protone quickly and ensure perfect comfort every time you ride. A rubberised dial allows micro-adjustment of the fit while the vertical stabilisers of the previous system have been redesigned to achieve even greater comfort and stability. The secure fit also ensures that in the event of a crash it keeps the helmet in place to afford the very best protection. Self-adjusting lateral divider This provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation. Coolmax Padding When the pressure is being applied at the front of the bunch, training is tough or the temperatures are rising fast, it's the Coolmax® padding that will deal with the inevitable sweat build-up. Quick to wick away sweat and quick to dry, you'll be kept cool and comfortable no matter what.
Let the Ventral do the Talking When you’re cycling, crashing is something that can always be a possibility, and in most cases, while you'll be battered and bruised, you'll soon be on your way again. However, there may be a time when you’re not able to simply dust yourself down and carry on riding. It’s here the Ventral AIR MIPS NFC Helmet comes in. It features a twICEme® NFC Medical ID chip, letting you store vital medical and emergency contact details. With an NFC-enabled smartphone first responders can read the chip and make the best treatment decisions there and then. MIPS Integra Head Protection Solution The Ventral AIR also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Fast Protection Engineered with aerodynamics at the forefront, the Ventral Air is one slippery performer. Tested extensively and designed using CFD to hone its aerodynamic performance, this is a helmet that won't slow you down. The careful design also extends to the ventilation, with airflow optimized via internal channels keeping you fresh at both slow and high speeds, without compromising aero performance. But not just fast it's incredibly protective too. The high-performance EPS liner is multi-density to offer optimal protection in key areas while also balancing the need for low weight. Added to this is the fully wrapped unibody shell construction, increasing both the durability and helmet integrity in the event of an accident. 360-degree Fit System In order to keep the Ventral in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.
Fox's lightest and most airy full-face helmet, the Proframe Full Face MTB Helmet is an incredible feat of mountain biking engineering. Should you get a bit too rowdy and gravity defies your riding skills then the Dual-density Varizorb™ EPS liner provides a boost to protection levels, absorbing and dissipating impact forces. This works in tandem with MIPS, an innovative system to protect against rotational impact brain injuries, ensuring you'll be straight back on your bike after a fall. Safety is class-leading and when it comes to ventilation few can match the Proframe either. The 15 Big Bore intake and 9 exhaust vents creating an almost open face feel as airflow zips through and over the head. Even the visor position is optimised for airflow. Nice. When you're pedalling to the top of the trail this is, of course, invaluable to keep you cool, and when you reach the top you'll be fresh and ready to push your limits on the way down. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Trail Riding Tech Featuring Fox Racing’s patent-pending integrated chin bar, the Proframe really does have plenty to shout about when it comes to safety. But it's comfortable too. An anti-microbial liner wicks away moisture and prevents the build-up of bacteria, keeping itchy helmet issues at bay. While for fast entry and exit, a Fidlock® Snap helmet buckle secures and releases with a satisfying snap - and it's easy to use even with gloves.
Whether you're hitting those big mountain lines, crushing loops at a bike park or taking on some MTB competition, the Kortal Helmet offers unrivalled head protection when you crash. Protect your head In order to keep your head protected, POC uses a combination of EPS foam inner liner and tough polycarbonate shell outer. The EPS foam inner soaks up and dissipates harmful impact forces, giving you the confidence that in the event of a fall, you'll enjoy reliable safety. To the outside, the polycarbonate all-over shell not only brushes off overhanging bushes and branches during normal trail riding but in the event of a crash, it maintains the structural integrity of the helmet. Extended zones around the temples and back of the head also give you extra protection in high-risk areas. Ready to Roll While safety is its main focus, POC has also go those smaller just as important MTB-specific details right too. The peak is adjustable, allowing you to pull up goggles and sunglasses and store them easily under the peak. It's also designed to break away in a crash, reducing forces on your neck. For goggle wearers, POC has ensured no ventilation ports are covered by your goggle strap, maintaining excellent airflow at all times. And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure. 360-degree Fit System In order to keep the Axion in place, you’ll find POC’s 360° fit system. This offers an easy-to-operate and precise fit, ensuring your Axion remains comfortable when riding and stays securely in place in the event of a crash. E-MTB ready The helmet is also certified to the Dutch NTA 8776 electric bicycle helmet standard, the only such standard in the world. So be it fully human-powered or with some electrical assistance, this is a mountain bike helmet you can trust.
Riding mountain bikes will see you encountering tough uphills followed by thrilling downhills, flowing singletrack and super-technical steep trails. If you need a helmet that can adapt to whatever the trail throws your way then the Super Air R Full Face Helmet is the one. For the uphills, 2 clicks to remove the chinbar and you'll get the benefits of the extra airflow of an open face helmet. For the gravity-fed part of your ride back downhill, reattach the chinbar and enjoy the extra protection of the full-face design. Speaking of protection, the Fusion In-Mould design features a tough polycarbonate shell bonded directly to a shock-absorbing EPS foam liner to give a helmet that can take the hard knocks of mountain biking. The EPS liner is engineered with multiple densities of foam to better absorb and dissipate the energies of a crash, thus enhancing protection levels. FLEX Spherical + MIPS® (Multi-directional Impact Protection System) The FLEX Spherical + MIPS® is the latest generation of slip-plane protection, designed to minimise the rotational forces placed on the head in the event of a crash. In doing so brain injuries are minimised. The FLEX Spherical + MIPS® has been created to address both high-speed and low-speed impacts while simultaneously dealing with rotational forces and at the same time it allows for better helmet ventilation too. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Getting the right fit is also paramount when it comes to safety and comfort. The Float Fit System, with easy to adjust rubber dial, makes this an easy task. The perfect fit every time. Keep Cool. Keep Fresh. When it comes to keeping a cool head the Super Air R excels too. 18 vents and the Overbrow Ventilation system turbo-charge airflow, drawing in cool air where it can keep your head fresh via the inner air-channel matrix. Sweat Guide padding draws moisture away from the skin for dry comfort while X-static padding, woven with silver fibres to inhibit the growth of odour-causing bacteria and fungi, ensures you'll never suffer an itchy scalp after a great session of mountain biking.
Crashing. It's an almost inevitable part of mountain biking. And if you're not crashing are you really pushing your limits? For those of you who definitely like to push your skills and grip to the very edge, the MTB 3.0 Helmet Enduro has all the safety features you need when stepping to the edge and beyond. Starting with the Polymer Shell, this is a light but protective outer, providing protection from those regular bumps and scrapes of mountain biking, a thwack from a trailside tree branch for instance or a slow speed tumble on a tight hairpin. Then there's the in-moulded impact foam. For higher speed impacts this absorbs crash energies and dissipates them to ensure your head is protected. The adjustable visor also breaks away, reducing rotational forces on your head and neck. We then come to the 360 ̊ Turbine Technology. 360 ̊ Turbine Technology The 360 ̊ Turbine Technology is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Sweat-Busting Ventilation When you're taking on challenging Enduro race or tough trails it's not just the safety features that will impress. Ventilation is also excellent. A combination of 23 vents and MaxiFlow impact foam air channels creates highly effective cooling airflow over your head, even at slower speeds. Getting sweaty is pretty inevitable though. And the moisture-wicking Dri-Lex® liner helps in this regard, keeping sweat away as you warm up. Being anti-dour and washable too, you'll enjoy freshness every ride. A Fidlock magnetic closure system makes securing the 3.0 super easy too.
If you love to push your mountain bike skills further and faster, taking on ever-more challenging terrain, a crash (or two) is all but inevitable. But should you see a tyre wash out, a landing come up short or a slippery root catch you out, with the Cliffhanger MTB Helmet (MIPS) you can be confident of reliable head protection. Multi-shell In-mould Design An inner shell made of EPS hard foam is formed into a three-part outer shell, offering excellent protection across the front, sides and back of your head while remaining low in weight. The multi-shell in-mould design also sees a durable outer shell bonded to a shock-absorbing EPS core. In the event of a crash, this combination of durable outer and shock-absorbing foam liner dissipates impact forces, protecting your head from injury. Inside the EPS core itself, the ActiCage Lite system provides structural support and crash integrity, allowing Abus to strip weight, and optimise the size of the vents while making no compromises to your protection in the event of a fall. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Zoom Ace MTB Fit System Excellent safety is also matched with excellent comfort and easy adjustment. A good-fitting helmet is essential for both safety and comfort. And here the Zoom Ace MTB adjustment system makes it easy to get the perfect fit. With the rear dial and the built-in height adjustment, you'll be able to get a secure fit every time you ride. And with ponytail compatibility, long hair isn't going to prevent a good fit either. A FidLock magnetic buckle makes securing your helmet fuss-free too - simply click and ride. Trail features If you love to ride trails with MTB goggles to keep your vision clear, the Cliffhanger features Abus' GoggFit system. This allows you to secure the goggles to your helmet when you're not in need of them. The Cliffhanger also has a height-adjustable visor, fending off low-hanging branches and overgrown bushes by the trail. In its uppermost adjustment, it also makes space for pulling up and stowing goggles, ideal for moments when you're taking some time to rest, grabbing a snack, and readying yourself for the fun of the next trail. There is also compatibility with QUIN chip system (Chip not supplied) - this works alongside the QUIN app to send an SOS should you crash - keeping you safer on remote trails.
The Linea 01 MIPS Full Face MTB Helmet makes use of a dual-density EPS inner, with a mapped design to provide targetted protection to those areas most susceptible to crash impacts. Meanwhile, the tough polycarbonate outer shell offers long-term durability and protection against lighter impacts - think branches and bushes along the trail. Structural strength and rigidity are enhanced by a nylon exoskeleton embedded within the inner shell. This starts across the chainguard and across the cheeks. This keeps weight low without sacrificing protection. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here NFC (Near Field Communication) Medical ID Device Included with the helmet is another layer of safety via an NFC TwiceMe system. Should you become incapacitated after a crash, this device gives first responders access to faster personal and health information transmission, allowing for dramatically reduced rescue times. Go with the Flow While you're mountain biking, you'll be generating some heat. But thanks to 29 carefully positioned vents, the Linea optimises airflow, ensuring you don't overheat. An anti-bacterial and anti-odour liner also makes for a fresh ride, every time. And when you need that new helmet feel, it's removable and washable too. Ride Ready Dianese have designed the Linea so that your vision of the trails remains clear and unrestricted. The chin guard is engineered not to get in your line of sight and the adjustable peak is easily adjusted with one hand so as to allow the perfect field of view. Fast and secure fastening is ensured by the Fidlock® magnetic system, which can also be operated while wearing gloves.
Advanced Protection The Aether Helmet (MIPS) is designed with a host of features to provide you with the ultimate combination of protection, fit and ventilation. First, let's look at protection. The Aether is engineered with a dual-density EPS foam liner that makes it capable of absorbing a wide range of impact energies. Meanwhile, the 6-piece outer is reinforced with a shatter-resistant AURA reinforcing arch giving a boost to structural integrity in the event of an impact. Protection is then bolstered by Giro's proprietary MIPS Spherical technology - this design sees the MIPs technology deployed between the layers of EPS foam rather than immediately next to the head which enables Giro to maintain incredible cooling airflow and comfort. What is MIPS? The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable So that's the protection, now let's look at ventilation and fit. As mentioned, the unique MIPS design has allowed Giro to maintain excellent airflow inside the helmets. This is fully taken advantage of with 11 Wind Tunnel vents over the helmet, all leading to internal channelling that forces air across the scalp. With the extensive venting, you'll enjoy a cool head even in the warmest conditions. The large and airy vents are made possible thanks to the support of the AURA reinforcing arch, maintaining structural integrity while giving scope to increase vent size. Roc-Loc® 5 fit system Now let's turn to the fit and the Roc-Loc® 5 fit system. This is the industry benchmark in comfort, stability, adjustability and weight savings. In addition to enhancing the fit and comfort of helmets, Roc Loc® 5 allows you to easily custom tune the fit tension and the fore-aft tilt of the helmet in seconds using a single hand. And it’s lighter than comparable systems too, making it the ultimate in skull-hugging luxury.