Can be used to remove the valve core from any schrader valve or from our removable core presta valves.
Kenda lightest tube with a featherly lite 0.60mm wall thickness to really save weight
This new size option is for the latest generation of 29er mountain bikes. Note: Image for illustration purposes only, the tube supplied is for 29" MTB wheels
Super lightweight butyl tube, even lighter than latex but not porous, so no need to reinflate every day. Can also be fixed with a normal puncture kit. The long valve inner tubes enables you to use deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Presta valve tubes are most commonly used for road wheels (700c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 700c rim valve holes.
Designed for Fatbikes tyres (3.5" - 4.8"), the butyl rubber compound prevents pressure loss and comes with a 40mm Presta valve.
Off-road: Riding at lower pressure means better performance ... but at the same time, it increases the risk of failures. The limit so far is at about 20 psi, below which it’s hardly possible to dare to ride normal MTB tyres. But nothing stays the same: In the future, air pressure can be controlled in the tyre‘s double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off-road performance. In the inner chamber, directly on the rim, there is high air pressure – even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible. The Name PROCORE is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts. Compatibility You can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm. PROCORE is a joint development of SCHWALBE and SYNTACE. PROCORE - the outer chamber The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide. PROCORE - the inner chamber Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high-pressure stable and at the same time very light. The Rim Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit. The PROCORE Valve The patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately). The PROCORE Air Guide The small red component made of white plastic ensures that the air can flow past the inner high pressure chamber into the outer low pressure chamber. - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.
From local crits to the Tour de France, professional riders have demonstrated time and time again that Aircomp's latex inner tubes have what it takes to excel throughout the season. Super-lightweight and durable, these inner tubes are the perfect match for today's high-intensity racing wheels.
An ultralight road inner tube which comes in three Presta valve sizes to suit your preferred wheel rim depth (40mm, 52mm or 60mm), it weighs a mere 70g and is constructed with the quality expected of such a renowned manufacturer.
Features:All purpose on/off road sealant,Best used in inner tubes, although it can be used in full UST systems,Capable of sealing holes upto 4 mm,Also ideal for E-bikes,Use 100ml for 26", 27.5" & 700c road / hybrid. 120ml for 29" MTB.
Extra heavy duty 1.2mm thick tubesGreat protection for those big hits and good for street.
This Schwalbe MTB Tube is lightweight, durable and maintains a stable air pressure. Made from a high-end rubber compound to guarantee air pressure retention, this reliable MTB Tube is perfect for long days in the mountains, downhill sessions and freeride lines, it does exactly what you need with zero fuss.
Self-sealing inner tube that will minimise any inconvenience from puncturesContains a liquid sealant that will seal a puncture in the tread area up to 3 mm wide, upon rotation of the wheelDurable welded butyl rubber constructionGreat value, puncture resistant replacement tube.