Nukeproof A.R.D. has been developed as a solution for riders who are running a tubeless set up to help prevent rim damage on rocks allowing you to run lower pressures. As ARD is protecting the rim it will also help protect against punctures.Key Features:Easy to remove and fit tyre,No tools required,Pinch flat protection,Rim protection,No sealant absorption,Weight: 130g,.Included:2 x ARD inserts,2 x Copper tubeless valves,1 x Sleeve around the ARD inserts,1 x Instruction sheet,.
Nukeproof Dolos Rim 26"Designed for mountain bike (MTB) and dirt jump riding disciplines, this 26" rim features a special blend of alloys for a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll be able to session the jumps in all weather conditions, without worrying about the elements damaging your gear.This rim is only available in 26” and has a 25mm internal width to suit tyres from 1.6” to 2.5”.Features: Rim Material: Alloy Nukeproof Blend Finish: Micro Shotpeened and Anodised Use: Mountain Bike (MTB), Dirt Jump Rim Width: Inner: 25mm; Outer: 30.8mm Rim Height: 22mm Rim Size: 26" Joint: Sleeved Tubeless Compatible: Yes, Use 28mm tape Drilling: 32 hole Brake Type: Disc only Valve Type: Presta Single or Pair: SingleManufacturer's Part Number: NUKDOLOSRIM26 Black 26"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 RimThis MTB rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you blast across the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to shred the trails in all weather conditions, without worrying about the elements damaging your gear.Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Option ERD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5% Features: Rim Material: Alloy Nukeproof BlendFinish: Micro shotpeened and anodised Use: MTB Rim Inner Width: 30mmRim Outer Width: 35mmRim Height: 21.6mmJoint: SleevedTubeless Compatible: Yes, Use 33mm tapeDrilling: 32 holeBrake Type: Disc onlyValve Type: PrestaBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 RimThis MTB rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you blast across the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to shred the trails in all weather conditions, without worrying about the elements damaging your gear.Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Option ERD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5% Features: Rim Material: Alloy Nukeproof BlendFinish: Micro shotpeened and anodised Use: MTB Rim Inner Width: 30mmRim Outer Width: 35mmRim Height: 21.6mmJoint: SleevedTubeless Compatible: Yes, Use 33mm tapeDrilling: 32 holeBrake Type: Disc onlyValve Type: PrestaBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 RimThis MTB rim has gone through extensive testing, so you can benefit from its fantastic strength and smooth rolling performance on the toughest of rides. It features a 28mm internal diameter and it's constructed from a 6066 alloy, which makes it light enough for aggressive trail-riding as well as strong enough for DH. This rim can be setup tubeless by using tubeless tape and is for disc brake use only. Rim Size ERD Approx Weight 27.5" 560.9 470g 29" 598.9 500g Features: Rim Material: 6066 Alloy Use: MTB Rim Inner Width: 28mm Rim External Width: 32mm Drilling: 32 hole Rim Height: 18mm Join: Welded Tubeless Compatible: Yes - use 33mm tape Brake Type: Disc only Finish: Sandblasted Valve Type: Presta Single or Pair: SingleBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Nukeproof Dolos rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll be able to session the jumps in all weather conditions, without worrying about the elements damaging your gear. This rim is only available in 26” and has a 25mm internal width suiting tyres from 1.6” to 2.5”. Manufacturer's Part Number: NUKDOLOSRIM26 Black 26"
This MTB rim is made from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you will enjoy the best of both worlds as you carve your way around the mountain. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against wear and corrosion. As a result, you'll benefit from being able to shred the trails in all weather conditions, without worrying about the elements ruining your gear. Nukeproof has ensured that their front and rear rim profiles are the same but due to the rear rim being more likely to take most of the hits, they have used a thicker sidewall for added strength. The front rim has a thinner sidewall, which allows for excellent weight savings and a perfect balance between strength and weight. If you want some extra security, or if you want to save some more weight, there is no problem using a pair of front or rear rims. Nukeproof use a sleeved rim as this allows them to have full control over the properties of the alloy. When you weld a rim it is exposed to a large amount of heat which changes the properties of the alloy in the area around the weld. This change can lead to a weak spot in the rim. Nukeproof's tolerances are so precise, they can ensure that the alloy properties are the same throughout the whole rim. Option RD Weight 27.5" Front 554.5 460g +/- 5% 27.5" Rear 554.3 490g +/- 5% 29" Front 592.5 510g +/- 5% 29" Rear 592.3 540g +/- 5%
This MTB rim features a 28mm internal diameter and it's constructed from a 6066 alloy, which makes it light enough for aggressive trail-riding as well as strong enough for DH. This rim can be setup tubeless by using tubeless tape and is for disc brake use only. Rim Size ERD Approx Weight 27.5" 560.9 470g 29" 598.9 500g
An affordable and super sturdy double-wall rim! The 36mm wide profile, 6000 series aluminum, and oversized pins increase strength significantly while keeping weight down. ###section### Product Specs WHEEL SIZE: 20" SEAM: Pinned ERD: TBC HEIGHT: TBC WIDTH: 36mm SPOKE HOLES: 36 WEIGHT: 16.3oz