The Scultura has always been the powerhouse of any Merida sponsored or supported ProTour teams powering them to world tour stage victories.The Lite frame uses cutting edge aluminium technology - 6066 series triple butted and hydroformed aluminium tubing with smooth welding to deliver a light responsive frame. The tapered full carbon fork delivers precise steering.
The Scultura has always been the powerhouse of any Merida sponsored or supported ProTour teams powering them to world tour stage victories.The Lite frame uses cutting edge aluminium technology - 6066 series triple butted and hydroformed aluminium tubing with smooth welding to deliver a light responsive frame. The tapered full carbon fork delivers precise steering.
Created for ultimate strength and durability, The battle rim has a unique and optimized profile that goes against the trend of low-profile rims and is instead designed around what it takes to handle whatever abuse is thrown at it. Made from 6066-T6 aluminum. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: TBC HEIGHT: 24mm WIDTH: 39mm SPOKE HOLES: 36h WEIGHT: 601g / 21.2oz
The Merritt Battle front wheel is built using a Merritt Battle rim and laced 3X with black spokes and black brass nipples to a 36H Merritt Non-Stop front hub. ###section### Product Specs WHEEL SIZE: 20" HUB: Merritt Non-Stop front hub AXLE: Female RIM: Merritt Battle rim SPOKES: 14 gauge spokes NIPPLES: Brass WEIGHT: TBC
6066 aluminum with welded seams, uses the same basic structure as the Merritt Battle Rim but more compact, lightweight (but still strong) option for riders that don’t need the brutal strength of the Merritt Battle Rim. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 390mm HEIGHT: TBC WIDTH: 39mm SPOKE HOLES: 36 WEIGHT: 17.7oz
An affordable and super sturdy double-wall rim! The 36mm wide profile, 6000 series aluminum, and oversized pins increase strength significantly while keeping weight down. ###section### Product Specs WHEEL SIZE: 20" SEAM: Pinned ERD: TBC HEIGHT: TBC WIDTH: 36mm SPOKE HOLES: 36 WEIGHT: 16.3oz
Nukeproof A.R.D. has been developed as a solution for riders who are running a tubeless set up to help prevent rim damage on rocks allowing you to run lower pressures. As ARD is protecting the rim it will also help protect against punctures.Key Features:Easy to remove and fit tyre,No tools required,Pinch flat protection,Rim protection,No sealant absorption,Weight: 130g,.Included:2 x ARD inserts,2 x Copper tubeless valves,1 x Sleeve around the ARD inserts,1 x Instruction sheet,.
Nukeproof Dolos Rim 26"Designed for mountain bike (MTB) and dirt jump riding disciplines, this 26" rim features a special blend of alloys for a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll be able to session the jumps in all weather conditions, without worrying about the elements damaging your gear.This rim is only available in 26” and has a 25mm internal width to suit tyres from 1.6” to 2.5”.Features: Rim Material: Alloy Nukeproof Blend Finish: Micro Shotpeened and Anodised Use: Mountain Bike (MTB), Dirt Jump Rim Width: Inner: 25mm; Outer: 30.8mm Rim Height: 22mm Rim Size: 26" Joint: Sleeved Tubeless Compatible: Yes, Use 28mm tape Drilling: 32 hole Brake Type: Disc only Valve Type: Presta Single or Pair: SingleManufacturer's Part Number: NUKDOLOSRIM26 Black 26"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Nukeproof Dolos rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll be able to session the jumps in all weather conditions, without worrying about the elements damaging your gear. This rim is only available in 26” and has a 25mm internal width suiting tyres from 1.6” to 2.5”. Manufacturer's Part Number: NUKDOLOSRIM26 Black 26"
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.