Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: The jack-of-all trades road rim from DT Swiss,The R 460 is light and wide, and results in a perfect price / performance combination,Being a 22 mm wide rim meansthe R 460 is ideally suited to the modern choice of wider tyres,The sleeve jointing process means reliability is not sacrificed, giving you many unforgettable miles on the road,ERD: 596,Outer width: 22 mm,Height: 23 mm,Max spoke tension: 1200 N,Weight: 460 grams.
Nukeproof Neutron V2 RimThis MTB rim has gone through extensive testing, so you can benefit from its fantastic strength and smooth rolling performance on the toughest of rides. It features a 28mm internal diameter and it's constructed from a 6066 alloy, which makes it light enough for aggressive trail-riding as well as strong enough for DH. This rim can be setup tubeless by using tubeless tape and is for disc brake use only. Rim Size ERD Approx Weight 27.5" 560.9 470g 29" 598.9 500g Features: Rim Material: 6066 Alloy Use: MTB Rim Inner Width: 28mm Rim External Width: 32mm Drilling: 32 hole Rim Height: 18mm Join: Welded Tubeless Compatible: Yes - use 33mm tape Brake Type: Disc only Finish: Sandblasted Valve Type: Presta Single or Pair: SingleBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
H Plus Son Archetype Hard Anodised Road RimThis lightweight, durable and stiff Road Rim from H Plus Son, offers exceptional balance when tackling the tarmac. Made from a strong alloy construction, it benefits from a 23mm width and provides a similar road performance of a tubular tyre. Faster Cornering PerformanceThe advantage of this tyre profile can be felt immediately when cornering. Tyres will no longer have a rounded profile, and this provides improved traction and exceptional grip. You will be riding and cornering faster with this rim profile and to balance braking control, H Plus Son have applied their impeccable workmanship and joined the rim with a precise, invisible weld joint.Features:Material: G609 AlloyHeight: 25mmWidth: 23mmSize: 700cJoint: WeldedBraking Track: MachinedTyre Type: ClincherERD: 595mmWeight: 470gBuy H Plus Son Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The eclat "Camber Welded" Rim is a high quality 20" BMX rim and comes with a wide design with double cavity and reinforced spoke wall. The seam of the eclat "Camber Welded" Rim is welded and has a solid construction to use for modern BMX riding. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: TBC HEIGHT: 14mm WIDTH: 36.5mm SPOKE HOLES: 36h WEIGHT: TBC
DT Swiss XR 331 20mm Mountain Bike Disc RimThe XR 331 20mm MTB Rim from DT Swiss is a Cross Country rim that pushes the bar for what is possible in the world of XC riding. This rim is lightweight without sacrificing structural strength in any way; material is removed from where it is not needed, creating a rim that is race ready and rolls with finesse. It is Disc Brake compatible and is fully tubeless ready straight out of the box.Features: Material: Aluminium Internal Rim Width: 20mm Outer Rim Width: 23.5mm Brake Compatibility: Disc Brake Use: Cross Country Type: Tubeless Ready Weight: 26": 340g; 27.5": 355g; 29": 380gBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Sun Ringle Duroc SD42 Mountain Bike Disc RimFor professional riders, a certain amount of fine-tuning is required to get the most performance out of your MTB rim. The SD42 tweaks the winning framework of the Duroc range just enough to ensure maximum speed capacity and control while also maintaining the durable welded aluminium rim to ensure your bike can withstand whatever the trail throws at it. A wider 42mm rim also means increased traction, allowing you bike to climb with less rolling resistance weighing you down.Features: Use: eMTB/AM/Enduro/Plus Spoke Count: 28, 32 Rim Material: Aluminium Rim Joint: Welded Rim Width: 42mm outer, 36mm inner Brake Compatibility: Disc Only Weight: 595g (front); 632g (rear) Tubeless ReadyBuy Sun Ringle Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Air rim has been designed specifically for park and trails riding to be both light and strong. An enormous amount of research and design work has gone into making this one of the best rims on the market. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 388mm HEIGHT: 19.4mm WIDTH: 33mm SPOKE HOLES: 36 WEIGHT: TBC
Double walled race rims from Sun Ringlé with front profile without brake surface, Not intended for brake use. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 390mm HEIGHT: TBC WIDTH: 28.5mm SPOKE HOLES: 36 WEIGHT: 395g
WTB KOM Light i21 TCS Mountain Bike Disc RimIf you want to get as much fun as possible out of your off-road adventures, you're going to want this super-lightweight mountain bike rim from WTB. The stiff alloy rim construction ensures you have plenty of durability and control, so you can handle any rough terrain or steep slope that comes your way. The 4D spoke drilling helps remove lateral loading and disperse tension throughout the rim, resulting in a powerful rolling performance even over gravel. Plus, the TCS 2.0 technology ensures a simple tubeless installation process, so you can spend less time in the workshop and more time adventuring.Features: Usage: Adventure / Gravel / Cyclocross Rim: Alloy, Tubeless Width: 21mm (inner) Spoke Holes: 32 Weight: 411gTechnologies:UST Tubeless Ready: The UST concept improves traction, control and comfort while reducing inertia and flats. TCS 2.0 Technology: This refined version of the “Tubeless Compatible System” offers the same high performance, lightweight mountain bike rim structure, but is now easier to install and more dependable.Buy WTB Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss XR 391 Mountain Bike Rim (25mm)Designed for a modern Mountain Bike (MTB), this rim from DT Swiss offers a lightweight construction, without sacrificing any strength or durability. Suitable for wide tyres, it is perfect for racing, general trail and off-road riding thanks to its excellent tyre profile. Features: Material: Aluminium Internal Rim Width: 25mm Outer Rim Width: 29mm Brake Compatibility: Disc Brake Use: Cross Country (XC), MTB Type: Tubeless Ready Spoke Holes: 28 (27.5"); 32 (29") Size/Width: 27.5" x 32H; 29" x 32HWeight: 27.5": 415g; 29": 440gBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Optimised Mountain Bike Trail Performance The tubeless compatible DT Swiss XR 391 features a welded construction and has then been bead blasted, and finally anodised; a perfectly treated and ready for racing XC rim. It uses a unique profile to create the perfect tyre shape, to create the best grip, traction and rolling performance available from the tyre tread. When lacing to a hub, it has greater structural strength thanks to the PHR nipple interface; maximising performance on the toughest mountain bike (MTB) trails.