Please note: that Stan's Yellow Rim Tape by itself is not a tubeless conversion. Traditional (Non Stan's NoTubes ZTR) rims including those labeled "tubeless ready" still require a black rubber NoTubes Rim Strip to achieve a secure tubeless setup. Using only Yellow Rim Tape and NoTubes Tyre Sealant on a conventional rim can result in catastrophic "burping" issues.
At LifeLine; reliability, quality and performance are always at the forefront of our minds and actions. Like all LifeLine products, the Essential Rim-Tape has been developed and tested to meet the highest standards using the leading factories to give you proven products. What's included: 2 X Rim-tapes For wheel sizes: ETRTO/METRIC 16/622 or 700c Narrow 18/622 or 700c Wide 16/559 or 26” Narrow 18/559 or 26” Wide ETRTO rim tape sizes reflect the internal rim width, then the rims outside diameter.
We spent a lot of time trying to find a reliable, strong tubeless tape that doesn't break the bank, and after considerable testing we have the product. Used for OEM set ups on Nukeproof and Prime Wheels, the Lifeline Tubeless Tape provides an effective air tight seal. We recommend you use the tape that is 2-3mm wider than your inner rim width.
Providing some of the most effective tubeless solutions on the market, Joe’s No Flats have once again delivered with their Rim Tape – 9M.
Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 – 3mm wider than your inner rim width. Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valve
This Continental Rim Tape guarantees top performance and avoids punctures caused by the internal rim when riding in demanding conditions.
This rim tape from Prime is easy to apply and heat-resistant to prevent wear even when you’re gunning for pole position. It conforms perfectly to the shape of your rim and creates an air-tight finish, so you can enjoy all the fast-rolling, puncture resistant benefits of a tubeless wheel.
Highly durable tubular tape for use with tubular tyres only. Less messy than glue and easy to apply to the rim. One roll (2 metres) usually contains enough for one set of wheels.
This Schwalbe Rim Tape is a vital component for keeping your bike's tubes protected when using standard clincher rims. It's the third most important factor besides the tube and tyre for puncture protection. This Schwalbe Mountain Bike Rim Tape effectively protects your inner tube against mechanical damage, for example from spoke heads and metal burrs around the spoke holes.
This Schwalbe Tubeless Tape is easy to fit, resistant to heat and high pressure, and comes in a 10-meter roll. A single layer of rim tape is all you need for a tubeless or clincher tyre setup. Even on road bikes, a single ply of Schwalbe Tubeless Rim Tape is sufficient. It's extremely user-friendly and at the same time very high pressure resistant. Please Note: Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on road bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and that the tubeless tyre will be secure.
Vital for setting up clincher tyres and tubes on standard rims.