Vital for setting up clincher tyres and tubes on standard rims.
This Schwalbe Tubeless Tape is easy to fit, resistant to heat and high pressure, and comes in a 10-meter roll. A single layer of rim tape is all you need for a tubeless or clincher tyre setup. Even on road bikes, a single ply of Schwalbe Tubeless Rim Tape is sufficient. It's extremely user-friendly and at the same time very high pressure resistant. Please Note: Only use wheels that have been specifically approved by the manufacturer for Tubeless conversion. Especially with the high-pressure demands on road bikes this is very important. Only the wheel maker’s approval ensures that the rim is up to the particular stresses in operation and that the tubeless tyre will be secure.
This Schwalbe Rim Tape is a vital component for keeping your bike's tubes protected when using standard clincher rims. It's the third most important factor besides the tube and tyre for puncture protection. This Schwalbe Mountain Bike Rim Tape effectively protects your inner tube against mechanical damage, for example from spoke heads and metal burrs around the spoke holes.
Made from heavy duty nylon. 24mm wide. Maximum tube protection from spokes and burs on rims. Weight: 55g (0.12lb / 1.94oz).
Tubeless rim tape which is used to seal the spoke holes on your tubeless ready rims to allow the use of tubeless tyres.Key Features:Tubeless rim tape to seal your tubeless ready rims,10 metre length enough for 4 full rim rotations,21mm & 25mm widths available,Double layer reccomended for an easier setup.
Prime Tubeless Road-Gravel Rim TapeThis tubeless rim tape from Prime is the preferred choice of the Vitus Pro Cycling team, perfect for any road racer looking for the optimum tubeless experience. With an extra-strong adhesive base and designed to be heat-resistant, this tape keeps your rim sealed air-tight and prevents wear even when you're gunning for first place. Plus, it's easy-to-apply and conforms perfectly to the shape of your rim, so you can enjoy all the fast-rolling, puncture-resistant benefits of a tubeless wheel without any hassle.Features: Length: 10m Heat Resistant Easy to Apply Can also be used as standard rim tape in Clincher set-up Available in 22mm, 24mm and 26mm widthsBuy Prime Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Tubeless Road-Gravel Rim TapeThis tubeless rim tape from Prime is the preferred choice of the Vitus Pro Cycling team, perfect for any road racer looking for the optimum tubeless experience. With an extra-strong adhesive base and designed to be heat-resistant, this tape keeps your rim sealed air-tight and prevents wear even when you're gunning for first place. Plus, it's easy-to-apply and conforms perfectly to the shape of your rim, so you can enjoy all the fast-rolling, puncture-resistant benefits of a tubeless wheel without any hassle.Features: Length: 10m Heat Resistant Easy to Apply Can also be used as standard rim tape in Clincher set-up Available in 22mm, 24mm and 26mm widthsBuy Prime Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Tubeless Road-Gravel Rim TapeThis tubeless rim tape from Prime is the preferred choice of the Vitus Pro Cycling team, perfect for any road racer looking for the optimum tubeless experience. With an extra-strong adhesive base and designed to be heat-resistant, this tape keeps your rim sealed air-tight and prevents wear even when you're gunning for first place. Plus, it's easy-to-apply and conforms perfectly to the shape of your rim, so you can enjoy all the fast-rolling, puncture-resistant benefits of a tubeless wheel without any hassle.Features: Length: 10m Heat Resistant Easy to Apply Can also be used as standard rim tape in Clincher set-up Available in 22mm, 24mm and 26mm widthsBuy Prime Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This rim tape from Prime is easy to apply and heat-resistant to prevent wear even when you’re gunning for pole position. It conforms perfectly to the shape of your rim and creates an air-tight finish, so you can enjoy all the fast-rolling, puncture resistant benefits of a tubeless wheel.
Designed by pro riders, mechanics and scientists, Peaty’s Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.Fitting instructions:01) Remove tyre and any old rim tape,02) Clean and degrease rim thoroughly,03) Ensure rim is completely dry before application,04) Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air,05) Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut,06) Use a small spike to pierce the tape in the centre of the valve hole,07) Remove dust cap and Push valve through the valve hole,08) Apply lock ring tightly by hand, ensuring there are no air gaps,09) Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre,10) Ride!.
Designed by pro riders, mechanics and scientists, Peaty's Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like proverbial to a blanket, yet leaves a minimal mess when removed. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit. Do you struggle to find the hole No problem! Just hold your rim up to the light and the tape's semi-transparent finish will illuminate the way. One 9 meter roll will cover approximately: 5 x 26" Rims, 4 x 27.5" Rims, 4 x 29" Rims or 4 x 700c Rims.
Designed by pro riders, mechanics and scientists, Peaty's Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like proverbial to a blanket, yet leaves a minimal mess when removed. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit. Do you struggle to find the hole No problem! Just hold your rim up to the light and the tape's semi-transparent finish will illuminate the way. One 9 meter roll will cover approximately: 5 x 26" Rims, 4 x 27.5" Rims, 4 x 29" Rims or 4 x 700c Rims.