ENVE M730 Carbon MTB Rims with Pro 4 HubsFor durability without compromising speed, ENVE's M730 MTB rims are the perfect solution for anyone looking to the future of Enduro and All Mountain riding. With a rim 27mm and 38mm wide, expect to utilise excellent aerodynamics and traction even on climbs with an effective ride smoothness to boot. Additionally, with ENVE's Protective Rim Strip technology, feel comfortable optimising your tyre pressure without risking damage to the rim, freeing you to perform even at super-low pressures.Complete with Durable Pro 4 HubsBuilt for durability, these alloy hubs use a 44-tooth drive mechanic to allow for excellent power transfer while also remaining lightweight, so you can press your advantage even further on the track knowing you'll get just energy back as you put in.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 30mm Rim Width External: 38mm Spoke Hole Count: 32 Recommended Tyre Width: 2.3 - 2.5" Weight: 552g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M735 Carbon MTB Rims with Pro 4 HubsIncredible strong and built to last, ENVE's M735 rims are a wider iteration of the M730 model that offers even greater traction and stability on the track. With a deep 27mm profile and a 100% UD carbon material, these rims offer brilliant aerodynamics for speed build-up while remaining lightweight to allow you to ascend and descend with maximum control. Plus, with ENVE's Protective Rim Strip technology, dare to choose a wider range of tire pressures without risking damage to the rim.Optimised with Pro 4 HubsThese rims come complete with a set of Pro 4 Hubs, each designed for durability while also offering excellent power transfer so that you get the most out of each pedal.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 35mm Rim Width External: 41mm Spoke Hole Count: 32 Recommended Tyre Width: 2.5 - 2.8" Weight: 558g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Onyx BMX Ultra and Ultra Disc Series are the go-to choice for most adult racers. The Ultra hub is built around Onyx Patented sprag clutch mechanism which features instant engagement during power strokes and instant disengagement when coasting. The clutch mechanism is also silent operation before, during and after clutch engagement allowing your brain to processes a noise-free connection of your bike to the track, helping you tune every move. Compatible with Shimano type (Hyperglide) cogs. ###section### Product Specs HUB TYPE: Sprag clutch AXLE: 20mm Front/10mm Rear DRIVER: HG spline DRIVE SIDE: Right Side Drive SPOKE HOLES: 36h WEIGHT: Front 236g / Rear 472g
The Onyx BMX Ultra and Ultra Disc Series are the go-to choice for most adult racers. The Ultra hub is built around Onyx Patented sprag clutch mechanism which features instant engagement during power strokes and instant disengagement when coasting. The clutch mechanism is also silent operation before, during and after clutch engagement allowing your brain to processes a noise-free connection of your bike to the track, helping you tune every move. Compatible with Shimano type (Hyperglide) cogs. ###section### Product Specs HUB TYPE:Sprag clutch AXLE:10mm DRIVER:HG spline SPOKE HOLES:36 WEIGHT:Front 240g / Rear 456g
For more than seven years, Box Founder Toby Henderson has been trying to build a reliable 20mm, cassette hub without creating a new cassette standard. The problem was fitting durable bearings between the cassette body and the oversize axle. The rear Quantum hub overcomes this by using the type of one piece driver commonly found on freestyle hubs. Each hubset includes a 1 piece, 16 tooth driver supported by 3 large, roller bearings. Inside the driver are 6 pawls, each with 2 teeth that engage a 60 tooth ratchet ring, meaning the hub has just 6° of engagement. The end result is a higher performing hub with fewer dead spots and less drag than others on the market. Quantum front hubs are available only with 20mm axles, but the rears can be easily converted between 10mm, 15mm and 20mm axles. Each set includes a front and rear 20mm set-up. Additional spacers are included. ###section### Product Specs HUB TYPE:Cassette AXLE:20mm DRIVER:16t chromoly SPOKE HOLES:36h WEIGHT:162g/5.7oz (front), 595g /21oz (rear w/o axles)
The Stay Strong Reactiv hubset consists of the Reactiv 20mm alloy fully sealed front hub with alloy female axle and the Reactiv alloy fully sealed rear hub with hollow axle, 6 Pawl, 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs AXLE SIZE: 20mm SPOKE HOLES: 36h BEARINGS: Sealed WEIGHT: TBC
The Stay Strong Reactiv hubset consists of the Reactiv 20mm alloy fully sealed front hub with alloy female axle and the Reactiv alloy fully sealed rear hub with hollow axle, 6 Pawl, 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs AXLE SIZE: 20mm SPOKE HOLES: BEARINGS: Sealed WEIGHT: TBC
Disc ready hub set from Stay Strong. Alloy fully sealed 36 hole with hollow axles. 6 Pawl with 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs HUB TYPE:Cassette AXLE:Front 20mm / Rear 10mm DRIVER:16t SPOKE HOLES:36 WEIGHT:Front 294g / Rear 413g
Disc ready hub set from Stay Strong. Alloy fully sealed 36 hole with hollow axles. 6 Pawl with 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs HUB TYPE:Cassette AXLE:Front 10mm / Rear 10mm DRIVER:16t SPOKE HOLES:36 WEIGHT:Front 200g / Rear 413g
The Stay Strong Reactiv disk hubset consists of the Reactiv 10mm alloy fully sealed front hub with alloy female axle and the Reactiv alloy fully sealed rear hub with hollow axle, 6 Pawl, 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs HUB TYPE:Cassette AXLE:Front 20mm / Rear 10mm DRIVER:16t SPOKE HOLES:36 WEIGHT:Front 294g / Rear 413g
The Stay Strong Reactiv hubset consists of the Reactiv 10mm alloy fully sealed front hub with alloy female axle and the Reactiv alloy fully sealed rear hub with hollow axle, 6 Pawl, 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs AXLE SIZE: 10mm SPOKE HOLES: 36h BEARINGS: Sealed WEIGHT: TBC
The Stay Strong Reactiv hubset consists of the Reactiv 10mm alloy fully sealed front hub with alloy female axle and the Reactiv alloy fully sealed rear hub with hollow axle, 6 Pawl, 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs AXLE SIZE: 10mm SPOKE HOLES: 28H BEARINGS: Sealed WEIGHT: TBC