ENVE M730 Carbon MTB Rims with Pro 4 HubsFor durability without compromising speed, ENVE's M730 MTB rims are the perfect solution for anyone looking to the future of Enduro and All Mountain riding. With a rim 27mm and 38mm wide, expect to utilise excellent aerodynamics and traction even on climbs with an effective ride smoothness to boot. Additionally, with ENVE's Protective Rim Strip technology, feel comfortable optimising your tyre pressure without risking damage to the rim, freeing you to perform even at super-low pressures.Complete with Durable Pro 4 HubsBuilt for durability, these alloy hubs use a 44-tooth drive mechanic to allow for excellent power transfer while also remaining lightweight, so you can press your advantage even further on the track knowing you'll get just energy back as you put in.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 30mm Rim Width External: 38mm Spoke Hole Count: 32 Recommended Tyre Width: 2.3 - 2.5" Weight: 552g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M735 Carbon MTB Rims with Pro 4 HubsIncredible strong and built to last, ENVE's M735 rims are a wider iteration of the M730 model that offers even greater traction and stability on the track. With a deep 27mm profile and a 100% UD carbon material, these rims offer brilliant aerodynamics for speed build-up while remaining lightweight to allow you to ascend and descend with maximum control. Plus, with ENVE's Protective Rim Strip technology, dare to choose a wider range of tire pressures without risking damage to the rim.Optimised with Pro 4 HubsThese rims come complete with a set of Pro 4 Hubs, each designed for durability while also offering excellent power transfer so that you get the most out of each pedal.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 35mm Rim Width External: 41mm Spoke Hole Count: 32 Recommended Tyre Width: 2.5 - 2.8" Weight: 558g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Fulcrum Campagnolo freehub has been designed to function smoothly with Campagnolo road bike cassettes and the Fulcrum Racing 1, Racing 3, Racing Zero, Racing Speed, Racing Light and Red Wind XLR road rear wheels.
Campagnolo-compatible freehub body for the Fulcrum Racing 5 Evo, Racing 7 and Red Wind NON XLR.
This tough and durable Fulcrum Shimano Freehub body is compatible with a wide range of Fulcrum road wheels including the Racing 3, Racing 1, Racing Zero, Racing Speed, Racing Light and Red Wind XLR models.
An ever present headache with traditional fixed hubs is the assembly of a drive sprocket that is attached by a thread being pulled in both directions by the pedal torque. The usual solution to avoiding the sprocket unwinding itself from the hub is a left-hand threaded lock-ring, butted up tight against the sprocket. But, as many riders have found out, this system can be quite volatile.We thought, there has to be a better way......and the solution - an HG splined hub body, with sprockets that slide on and an independent lockring that never has to handle rotational forces from the drive.Halo Fix-G advantages:Easy and secure fixing and servicing.,Adjustable chainline - 41 to 52mm.,Accepts 12 - 20T sprockets.,No need for chainwhip tools.."Halo's HG spline system is so obvious and brilliant that other brands must be kicking themselves for not thinking of it first. It can't slip or thread; it's way easier to fit or swap and will take down to 12t cogs, it's genius". Ty at the Footdown - www.thefootdown.co.uk"The Fix-g hub is great! It runs smoothly as the previous Halo hub but the fact that you can move the sprocket for a perfect chainline is great and you can feel the difference straight away. Also, it's really easy to do, everyone can do it without a mechanic's help." Ivan Fiorilla, 5th Floor riding club - London. www.the5thfloor.co.ukNote: The HG spline must ONLY be used with 7mm wide "fat foot" sprockets such as Halo Fat Foot sprockets or Gusset Double Six sprocket to avoid the cog biting into the alloy splines on the hub. Regular width HG sprockets should NEVER be used.SpecificationsMaterial Alloy forged and CNC machined,Drillings 32H, 36H or 48H depending on model,Bearings 2 x 6000 series Japanese sealed bearings.,Axle Hollow M10 Cr-Mo axle,Spoke Hole Circle Diameter (PCD) 62mm,spoke hole size (diameter) 2.5mm,Centre to Flange Left and Right: 34mm,OLD 120mm,Colour Black, Silver or White,Weight 328g.
Fat Bike Front HubsDeveloped using the proven technology of our well established mountain bike products our Fat bike hubs deliver excellent performance.Light, smooth, dependable and highly adaptable for different forks. Our 135mm and 150mm front fat hubs are CNC machined from high strength forged 7075 alloy and feature two durable 6804 sealed cartridge bearings.135mm hub specifications:Please note: Our 135mm hubs are ONLY suitable for forks with front disc spacing, not rear spacing.Supplied to fit 135mm x 15mm thru-axle.Axle options included:142mm x 15mm thru-axle end caps.,M10 bolt-in 135mm axle (includes bolts), fits a regular QR dropout..Weights:15mm thru-axle 210g,10mm female type 260g (without bolts).,10mm female type 323g (inc bolts)..Dimensions:Flange spacing: 96mm,Flange diameter: 58mm,C-L 40mm,C-R 52mm.150mm hub specifications:Supplied to fit 150mm x 15mm thru-axle..Weight: 223g.Dimensions:Flange spacing: 111mm,Flange diameter: 58mm,C-L 48mm,C-R 60mm.SpecificationsMaterial High strength forged 7075 alloy shell,Drillings 32H,Bearings 6804 Cartridge bearings,Disc Mount 6 bolt,Model Ref 6DSWF3 (135mm) 6DSWF5 (150mm),Colour Black.
Fat Bike Rear HubsDeveloped using the proven technology of our well established mountain bike products our Fat bike hubs deliver excellent performance.Light and smooth with reliable power transfer. The ultra-dependable drive system of this hub uses 6 independently sprung, double tipped, reversed pawls; giving 12 point simultaneous engagement on a 30 click cro-mo drive ring.Available with Shimano HG (Alloy or Cr-Mo) or Sram XD freehubs.170mm hub specifications:4 sealed cartridge bearings.,Flange spacing: 78mm,Flange diameter: 58mm,C-L 40mm,C-R 35mm,Chainline: 61.7mm.Supplied to fit 177mm x 12mm thru-axle with 170mm x M10 bolt-in axle set included. Fits regular QR or horizontal SS dropouts.Weights: 12mm thru-axle 400g, 10mm female type 478g (inc bolts).190mm hub specifications:5 cartridge bearings.,Flange spacing: 110mm,Flange diameter: 58mm,C-L 62mm,C-R 45mm,Chainline: 71.7mm.Supplied to fit 190mm x 12mm thru-axle with end caps for 197mm x 12mm thru-axle system included.Weight: 432grams (12mm axle type)SpecificationsDrillings 32H,Bearings 6902 cartridge bearings,Model Ref 6DSWR7 (170mm) 6DSWR9 (190mm),Colour Black,Weight 400 - 476g.
The hub shell is CNC machined in Barnoldswick, England from a single forged billet of 2014-T6 aluminium and uses a 7075 aluminium cassette body. Both these are now machined to allow fitting of the new generation of 11 speed cassettes from Shimano, but still allow for use of 9 and 10 speed Shimano and Sram cassettes by means of a removable spacer. Hubs are also available to suit Campagnolo 9, 10 and 11 speed cassettes. The hub is also fitted with our new 40 tooth ratchet with 4 pawl engagement, giving a quick, dependable drive.
All bearings are from world renowned manufacturers to ensure the highest quality. Also every hub shell and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.
All bearings are from world renowned manufacturers to ensure the highest quality. Also every hub shell and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.
All bearings are from world renowned manufacturers to ensure the highest quality. Also every hub shell and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.