The long valve inner tubes enables you to use deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. 650c Wheel Sizing Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels. Based on ETRTO (European Tyre and Rim Technical Organisation) dimensions, 650c wheels are smaller than 700c wheels by about eight percent. Please, when on this page make sure you are buying the correct tyre size for you wheel. Check the sizing on your tyre before purchasing from this page. Tyre sizes tend to be printed on the sidewalls so please check before making a purchase.
The long valve inner tube enables you to use these with deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Road Inner Tubes with Presta Valves Presta valve tubes are most commonly used for road wheels (700c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commonly found on MTB wheels as the valve is larger and won't fit through 700c rim valve holes. Inner Tube Weights: 700 x 20-25 (60mm valve): 105g 700 x 20-25 (80mm valve): 105g 700 x 25-32: 125g 700 x 32-47 Tour28: 200g 700 x 32-47 Cross28: 155g
Super lightweight butyl tube, even lighter than latex but not porous, so no need to reinflate every day. Can also be fixed with a normal puncture kit. The shorter valves on these inner tubes are ideal for wheels with rim depths of 24mm or 30mm but are not ideal for wheels with rim depths of 35mm or above (as the shorter valve would not extend out of the rim valve hole). Presta valve tubes are most commonly used for road wheels (700c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commonly found on MTB wheels as valve is larger and won't fit through 700c rim valve holes.
Each and every inner tube passes a stringent 100% quality control inspection
Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm but are not ideal for wheels with rim depths of 40mm or above (as the shorter valve would not extend out of the rim valve hole). Presta valve tubes are most commonly used for road wheels (700c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commonly found on MTB wheels as the valve is larger and won't fit through 700c rim valve holes. Please note: if you are running a 25c Tyre you can use either the 20 - 25 Race 28 or the 25 - 32 race 28 options. The larger volume tube will give you the option to increase your tyre size at a later date and will run with less stress than the smaller size in a 25c tyre. Inner Tube Weights: Dunlop 40mm valve / 700 x 32-47 Tour 28: (182021) 200g Dunlop 40mm valve / 27 x 1 1/8 - 28x1 3/8x1 5/8 Tour 28: 200g Presta 42mm valve / 700x18-25c Race 28: 105g Presta 42mm valve / 700x25-32c Race 28: 125g Presta 42mm valve / 700 x 28-37c Tour 28: 155g Presta 42mm valve / 700 x 32-47c Tour 28: 200g Presta 42mm valve / 700 x 32-47c Cross 28: 155g Presta 40mm valve / 700 x 28-37c Tour 28: 155g Presta 40mm valve / 700 x 32-47c Tour 28: 200g
Made from lightweight and quick-wicking polyester, the Light Head Thingy wastes no time in drawing sweat off the skin when you're cycling. This ensures you remain dry and comfortable when the day heats up. It's also good to wear on less warm days, preventing the chill of sweat from cooling you down too much. The seamless construction means there are no annoying seams to catch on the skin and the sublimated graphics give any kit a stylish finish.
The Buff Midweight Merino Wool Neck Tube is a natural fibre and seamless tubular that has multiple uses for locking in warmth or keeping your hair back. Made with mulesing-free, 100% Merino Wool, it comes with built-in natural odour prevention and would work just as well as a neckerchief and balaclava as it would as a headband, bandana or scrunchie.
The Original Buff® tubular features a 4-way stretch and has been made from recycled polyester microfibre obtained from clear plastic recycled bottles supplied and certified by Repreve®. It is also suitable for all weather conditions as it has a UPF 50 rating. This multifunctional tubular accessory is ideal for many activities. Designed to keep you warm in the cold, alongside wicking moisture (sweat) away from your skin to keep you cool when it is hot. Plus, the lightweight, breathable, microfibre fabric is extremely comfortable to wear and it can be worn as a neckerchief, headband, wristband, mask, hair-band, balaclava, scarf, headband, scrunchie, saharaine, pirate cap, beanie and bandana. Washing Advice Machine washable but do not iron.
Made from 100% Merino wool, the Lightweight Merino Wool Buff® has the ability to efficiently thermoregulate as you move and comes with anti-microbial properties as well as a stretchy finish. Perfect for walks, hikes and low intensity sports, it can be worn as a neckerchief, headband, wristband, mask, hairband, balaclava, scarf, scrunchie, saharaine, pirate cap, beanie or bandana. Washing Advice Do not machine wash or tumble dry.
The Buff Merino Move neck tube comes in a fun colour-blocked pattern with a seamless knit and is just as versatile as the original tubular design, but with the added benefit of extra warmth and adaptability. Made with Merino Wool, this multi-functional neck tube can still be worn a variety of ways but is now extra soft, temperature regulating, and odour-resistant. Perfect for keeping your head or neck warm and adjusting to what the weather may throw at you. Care Instructions Wash by hand.
Ready for practising your favourite tricks in the skatepark, this inner tube is specifically designed for intense BMX use. It features a Schrader valve and it is suitable for 20" tyres for quick and easy installation. Sizes Available: 20" x 1.75" - 2.35" Schrader 33mm; ETRTO: 47/60-406 Weight: (+/- 10%) 20" x 1.75" - 2.35" Schrader 33mm: 172±9g
Key Features:Thick adhesive pad to protect your downtube’s paint against flying dirt and debris,Extra strong adhesive stays attached even under the most extreme conditions,Size: 500 x 50mm.