ELEMNT BOLT GPS Bike ComputerEvery detail of the sleek, smart and supremely powerful ELEMNT BOLT is designed to help you get out in front and stay there. Built to defy the forces trying to slow you down, the race-worthy aerodynamics, intuitive mapping and targeted training features provide you with a bike computer that optimises performance to help you power past the competition.Smart Navigation Features- Get Me Started: Turn by turn navigation to the start of your route.- Back On Track: Re-routing to get back on course if you take a detour or wrong turn.- Take Me To: Select a point on the map or enter an address for navigation on-demand.- Saved Locations: Save your favourite locations to generate turn-by-turn directions on the fly easily.- Route To Start: Turn-by-turn directions for the shortest route back to the start of your ride.- Retrace Your Route: Turn-by-turn directions to retrace your route back to the start.Key Features- Easy Sense Buttons: Three easy-sense convex top buttons let you effortlessly toggle through workout screens - even when wearing long-finger gloves. So you can spend less time looking down and more time focused on your ride.- Quicklook LEDs: Programmable LED indicators offer a better way to follow routes, monitor performance and stay focused at a glance.- Train With Purpose: Fully integrated with TrainerRoad, TrainingPeaks, and Today's Plan. Quickly find training plans and execute structured workouts that you can ride outdoors or indoors on any Wahoo Smart trainer. Your workout data is automatically sent back to the apps, making it easy to set, track and achieve your performance goals.- Explore More: With 16GB of onboard storage, you have the ability to store more maps, more race courses and more route packs. Letting you prioritise your training needs, not your bike computer's storage.- Easy To See: A vibrant display combines colourful highlights with PerfectView Zoom™, an ambient light sensor and quick glance programmable LEDs. You can focus on your ride data when it matters most.- Colour Where It Counts: A vivid, high contrast 64-colour screen uses highlight colour selectively on highly customisable, easy-to-read charts and graphs to give you critical route and performance data with just a glance.- Ambient Light Sensor: Even when riding in low light, your date is easy to see, so you can keep training no matter the conditions.- Targeted Effort: PerfectView Zoom™ allows you to easily zero in on the specific ride metrics most important to you. Making it easy to optimise every ride.
It is brighter. It is easier to use. And it is smarter. Welcome to the Stages Dash - M50 GPS Computer, featuring a brilliant full color EverBrite™ screen, cycling-specific maps with navigation and course elevation profile, and a full assortment of training and workout features suitable for first-year riders and seasoned pros alike. With ANT+ and Bluetooth connectivity you can pair Stages Dash to almost any device and the screen is easily configured to display any combination of data you prefer, in either landscape or portrait mode. The Stages Dash is backed up by an all-new Stages LINK app for setup, wireless ride file transfers, on-screen text and phone notifications and comprehensive ride data analysis and training history, all for free. Compared to the Stages Dash - L50 GPS Computer, the M50 features a smaller screen and overall size, and up to 12 data fields.
It is brighter. It is easier to use. And it is smarter. Welcome to the Stages Dash - L50 GPS Computer, featuring a brilliant full color EverBrite™ screen, cycling-specific maps with navigation and course elevation profile, and a full assortment of training and workout features suitable for first-year riders and seasoned pros alike. With ANT+ and Bluetooth connectivity you can pair Stages Dash to almost any device and the screen is easily configured to display any combination of data you prefer, in either landscape or portrait mode. The Stages Dash is backed up by an all-new Stages LINK app for setup, wireless ride file transfers, on-screen text and phone notifications and comprehensive ride data analysis and training history, all for free. Compared to the Stages Dash - M50 GPS Computer, the L50 features a larger screen, more data fields (up to 16) and a larger battery for extended runtime.
Few brands are as synonymous in cycling tech as Garmin. As you would expect, from their top-of-the-range model, the Edge 1030 Plus is crammed with the most up to date technology and features. With its crisp touchscreen display, long battery life, and superb navigation, this cycling computer is as equally suited to long bikepacking adventures, as it is training and racing in all weather. Screen Clarity Before we delve into the device itself, its most striking feature is the physical size of it. Boasting an 89mm touchscreen display and weighing 124g, the Edge 1030 Plus is certainly a cycling computer that stands out. The benefit of the screen’s size is that it’s easy to read in varying levels of light and is responsive to swipes, even in winter gloves. So whether you’re training before the sun rises or touring on the brightest summer days, you’ll easily be able to flick between data screens and maps. The screen’s size allows you to clearly display up to ten data fields per page and detailed maps, without the need to squint. With access to Garmin’s Connect IQ app store, there’s seemingly endless options for customisable screens. Whether you’re a minimalist or data junky, you’ll be able to tailor your screens to suit your particular need. Big Package, Big Tech As you would expect, from the largest and most expensive computer in the Garmin range, the Edge 1030 Plus is chocked full of tech. It is — of course — Bluetooth and ANT+ compatible, so you can pair your device with heartrate monitors, power meters, turbo trainers, and electronic groupsets. Additionally, this top-tier model also offers WiFi connectivity; making it seamless to sync your routes and rides from the computer (and vice versa). Safety First Garmin have incorporated a number of safety features into this model. Paired with your phone, you can allow your riding buddies and loved ones to track your progress live. With Incident Detection enabled — should the worst happen — the device can automatically send your location to a designated person. You can also receive text and call notifications on the go, so you needn’t miss a message from home. Through the navigation software, you can also receive alerts for approaching hazards, such as steep descents or particularly sharp turns. Navigation From a navigation perspective, this powerful device offers detailed maps, turn-by-turn navigation, off-course calculations, and auto-route creation. All of these features combined, make it ideal for exploring new roads and trails. When using navigation you’ll have access to Garmin’s ClimbPro feature. This handily displays live information on any hill you happen to be on, including the length, gradient, and — crucially — how much longer there is to the top! You’ll also be able to see when the next hill is approaching and how many remain. Data All Day Long Importantly, for a device intended for adventures, the Edge 1030 Plus offers 24-hours of ride time when fully charged. Attach Garmin’s Charge powerpack and it’ll go 48-hours between charges. All this means it’s suitable for bikepacking and any long distance riding. Product Features 89mm full-colour touchscreen display Fully customisable display Bluetooth and ANT+ compatible GPS capable Detailed maps with turn-by-turn navigation and off-course calculations Suggests rides and workouts based on your current training load. Compatible with heart rate monitors, power meters, turbo trainers, and electronic groupsets Pair your phone and receive text and call notifications on the go USB-rechargeable 48-hours of ride time on a full charge when paired with a Garmin Charge power pack Weighs 124 grams In the Box: Edge® 1030 Plus, Mounts (standard and flush out-front), USB cable, Tether, Manuals Pre-loaded with UK and EU maps
The Garmin 130 is a compact cycling computer that weighs just 34 grams. Equipped with a clear, black-and-white screen, the display is easy to read in a wide range of conditions - from commuting in pitch black to heady summer road rides. Thanks to the large buttons on the side of the unit, the Garmin 130 is easy to use, even when wearing thick winter gloves. As a Bluetooth and ANT+ capable device, you can pair the Garmin 130 with power meters, heart rate monitors and cadence sensors so you can track your rides and train more effectively. It even gives you the option to load and follow routes, as well as offering turn-by-turn navigation. Additionally, the Garmin 130 supports structured training sessions and even has the ability to load Strava segments. As a USB rechargeable unit, it stores up to 15 hours of ride time per charge, so you should never come unstuck when out and about. Simplified 1.8 display Customisable screen GPS-capable Turn-by-turn navigation Bluetooth & ANT+ compatible Supports Strava Live Segments Smartphone compatible IPX7 waterproof USB rechargeable Up to 15 hours of battery life Compatible with Varia cycling awareness accessories Connected features include smart notifications, weather and more; LiveTrack and Assistance features make it easy to share your location
Despite an influx of competitors in recent years, Garmin still remains synonymous with GPS bike computers. The Edge 830 might be one step down from the company’s top-tier model, but that’s not to say it’s not a state-of-the-art device in its own right. For this version, the US-based brand have packed it full of features that’ll satisfy both road cyclists and mountain bikers. As well as the expected features, like logging your rides, there’s a plethora of training features incorporated, such as the ability to track heat and altitude acclimation training, and a variety of performance metrics. For the mountain bikers, you can capture your airtime, how well you’ve ridden a trail, and explore new trails. Touchscreen Simplicity The Edge 830 has a 66mm (2.6”), colour touchscreen display, supplemented by a few buttons for stopping/starting a ride, lapping, and turning the device on/off. The end result is a very sleekly shaped device, that won’t look out of place on your modern bicycle. Functionally, Garmin have improved upon the previous version, too. The touchscreen is intuitive and simple to use, and it’ll function even in the wet. Navigation Ease Your device will arrive complete with a mapset of the region you bought it in. To make the most of these maps, the Edge 830 has some powerful navigation tricks up its sleeve. Turn-by-turn navigation, on pre-planned routes, is better than ever. You can use Garmin Connect’s heat map data to generate and upload your own routes or use the online-routing platform of your choice to create and upload routes. A key feature that distinguishes this device from lesser devices, like the Edge 530, is that it will perform address-specific routing through the device itself. Meaning, you can enter a street address on the computer and the device will generate a route from your location to the entered location. You can also browse points of interest, such as hotels, shops, train stations, etc. and be taken straight to them. Don’t despair if you go off route or end up in unfamiliar territory. Auto-rerouting will get you back on track and you can use the navigation software to take you back to your saved locations, like home. ClimbPro ClimbPro is a feature Garmin have added for those that spend their days climbing, whether you like climbs or not. When using a pre-loaded route, this feature will automatically generate detailed climb charts for the climbs on your route. You’ll be able to see how far there is to go, the average grade for the remainder of the climb, and you can also add customizable data fields. The Edge 830 will handily colour code your climb, based on the severity of the gradient. So that, depending on your perspective, you’ll be able to see how much joy or suffering remains on your ride. Upgrade Your Training If you are training or racing in hot or high altitude locations you’ll be interested in the heat and altitude acclimation features. With these features you’ll receive data post-workout on whether you have acclimated to particular heat or altitude. For longer rides, a well-timed nutrition schedule is vital for maximal performance. While following a pre-loaded route, the Garmin Edge 830 will send periodic reminders to eat and drink. At the end of the ride, you can also tell the device how much you have eaten and drunk, to begin to get an accurate picture of whether your nutrition strategy is adequate. Training Status will display your Training Load over the last week, and let you know whether your training is productive or not. Additionally, the Edge 830 will also keep a record of your FTP, estimated VO2 Max, and your power curve. Activity Profiles And Data Screens If you want to participate in different forms of cycling, or even just want different setups for different types of ride, then you can create a variety of custom activity profiles. You can have a mountain biking profile to see your jumps. A road-training profile with all the training metrics you desire. And a slimmed-down race profile, with only the bare essentials, for race day. Or set up whatever you like. There’s no set limit to the data pages you can employ and you display up to 12 data fields per page, so whether you want all the data or a minimal set up, the choice is yours. Safety First Should the worst happen and you are involved in an incident, incident detection can be used to automatically alert designated friends or family. You can also enable live track so your ride buddies and family can follow your progress. Rest a little easier during the café stop with Garmin’s Bike Alarm feature. Internal accelerometers, within the device, will detect if your pride and joy is moved while you’ve paused for a rest. You’ll be notified if this does happen via phone notifications and an alarm sounding from the device itself. Find My Edge is a particularly useful feature for off-road riding. Should your device become dislodged from your bike, with this setting enabled, you’ll be able to see where the computer is and trigger an alarm to help you locate it. Mountain Bike Features In partnership with Trailforks, the mountain-bike trail mappers, Garmin is offering hundreds of thousands of mountain-bike trail routes built into the unit, along with a trail rating for each. You can then plan a route using Trailforks or let Garmin pick a trail based on a particular rating. All that’s left for you to do is fly down the trail. Once completed, you can see an accurate overview of how hard the trail was and how well you nailed it. Mountain Bike Dynamics is also included in the Edge 830 bike computer. This feature includes Grit, Flow, and Jumps. Grit is responsible for calculating a difficulty rating for each route. Grit factors in elevation and GPS data to rate how testing a trail is. The higher the number, the more testing the trail. Flow will let you know how well you’ve ridden a particular trail. It will analyse your momentum, by looking at things like braking, and will provide a score you can work on. The lower your Flow rating, the better. Lastly, Jumps, as you will imagine is about your airtime. It’ll log how many jumps you’ve performed, as well as the distance and hang time. Summary So if you are looking for a GPS-enabled, touchscreen bike computer look no further than Garmin’s Edge 830. If you are a performance-oriented cyclist, that wants dynamic performance monitoring and insights into your training it’ll serve you well. Equally, use it to pace your climbs and track your jump count and distance, and hang time. Key Features 20 hours of battery life, up to 48 hours in power save mode Dimensions = 50mm x 82mm x 20mm A 66mm touchscreen, colour display Display resolution = 246 x 322 pixels Weighs 79.1g IPX7 water rating Add and create routes WiFi, Bluetooth, and ANT+ enabled Compatibility Cadence (ANT+ or Bluetooth Smart) Edge Remote (ANT+) eBike (ANT+) Heart Rate (ANT+ or Bluetooth Smart) Lights (ANT+) Indoor Trainer (ANT+ FE-C, though paired in a different spot) Radar (ANT+) Power Meter (ANT+ or Bluetooth Smart) Shifting (ANT+) Shimano Di2 (ANT) Speed/Cadence (ANT+ or Bluetooth Smart) Speed (ANT+ or Bluetooth Smart) Varia Vision (ANT+) VIRB (ANT+) In the Box Device only Edge 830 Flush out-front mount Standard mount Tether USB cable Documentation Pre-loaded with UK and EU Maps
Highlighted by a large, 2.2-inch, 240x320 high-resolution color screen, the new Mega C contains all the features serious road, gravel and mountain bike riders and racers as well as long distance adventure riders require. Color graphics help you quickly and easily identify specific data fields and target training zones, as well as including a HR and cadence/speed sensor for more information Features: Optimized, easy to read color display with backlight Durable, composite construction Super accurate, advanced data recording system combines GPS plus Glonass satellites Simultaneous ANT+™ and Bluetooth Smart connectivity Multiple real-time features when paired to the Lezyne Ally app Barometer and accelerometer Simple setup through Lezyne Ally phone app Import .tcx and gpx. Files Trainer Mode Multiple bike profiles Full navigation Custom route building Intuitive four button operation Lithium polymer battery provides up to 32 hours of runtime Micro USB rechargeable Stores up to 800 hours of ride data Customizable fields and page count (up to 8 fields) On screen preloaded maps Custom alerts and auto presets Extremely weather resistant Includes X-Lock Standard Mount Display Data: Map Turn-by-turn navigation Live Tracking icon Strava Live Segments Structured Workout Heart Rate*: Current, Average, Max. Cadence*: Current, Average Power* (6 data display options) Training specific fields Electronic drivetrain data Speed: Current, Average, Max. Distance: Current, Trip Total, Trip 2, Odometer Time: Ride Time, Clock Date Laps and lap averages Elevation: Ascent, Descent, Current Grade Calories Temperature GPS signal strength Battery life indicator for device and paired devices Connected devices icons Bread crumb trail page Connectivity: Receive text, email, phone call and message app notifications when paired to smartphone Sync rides via Bluetooth Smart to the Lezyne Ally phone app Instant download of ride files (.fit) via plug-and-play flash drive technology (Windows/Mac) and upload directly to GPS Root website for ride analysis Auto-sync to Strava, TrainingPeaks and Today’s Plan Pairs with Bluetooth Smart or ANT+ enabled heart rate monitors, cadence/speed sensors and power meters Connects with compatible electronic drivetrains Turn-by-turn navigation Off-line maps and rerouting Follow starred Strava segments and routes Follow structured workouts from Today’s Plan and TrainingPeaks Includes Heart rate monitor and speed/cadence sensor
The all new Rider 320 is specially designed to provide a clear and detailed viewing experience on the go. The 2.3 inch Mono LCD screen with 4 easy to access buttons, the Ride320 gives crystal clear access to your ride data anytime of the day or night. With enhanced convenience and compatibility, the Rider 320 provides support for BLE sensors. Allowing you to pair your Speed or Cadence sensor, Heart Rate Monitor or Power Meter including onscreen data for Pedal Power meters.Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides extensive coverage and versatility in all types of terrain, even in dense tree cover, in the mountains, built up urban zones or wide open roads. The Rider320 is ready for use anywhere in the world, thanks to incorporating access to the top 5 Global Navigation Satellite Systems (GNSS).The Rider 320 T bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor & Cadence sensor in the box.Supports up to 72+ functionsPowerful, enhanced features35 hours of battery lifeHigh contrast 2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Quick & simple data screen change via Bryton AppSmart Notifications (SMS, Calls & Emails)Supports Full GNSS (Global)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for altitudeAuto Altitude Calibration by GPSBLE support for connecting to your additional sensorsPedal Power Meter compatibleHeart rate & Power Meter zonesUploads to Strava / Relive / TrainingPeaks / Selfloops Auto SyncLap history: 130 lapsLog history: 300 hoursIn the Box:Rider 320 Main UnitBluetooth/ANT+ Heart Rate MonitorBluetooth/ANT+ Cadence SensorUSB CableBike MountQuick Start GuideSimple but Powerful - Utilizing an advanced high-quality, optically bonded display, the Rider 320 is specially designed to provide a clear and versatile viewing experience Enhancing convenience and compatibility, the Rider 320 provides support for both ANT+ and BLE sensors. Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides more extensive coverage and versatility in any type of terrain, even in dense tree/building cover or in the mountains, as well as in more regions by incorporating the top 5 Global Navigation Satellite Systems (GNSS).Crystal Clear Display - Designed to create the best viewing experience, the Rider 320 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 320 after simple pairing.Absolute Precision - The Rider 320 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 72+ Functions - Rider 320 provides rich data for accurately gauging the performance of each ride. It incorporates up to 72+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 320 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.Power Meter Calibration & Pedal Support - The Rider 320 aims to increase the compatibility and functionality of ANT+ Power Meters by allowing riders to easily input crank length and calibrate their power meters for more precise power values. Additionally, the Rider 320 now supports Power Pedals, which can be easily calibrated in the same way and allow detailed L/R pedal power analysis.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 320 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to modify device and grid settings and calibrate altitude all without WLAN connection. The app will also check the firmware version of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive Auto Sync - Compete with worldwide riders through Rider 320 recorded data. The Rider 320 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks, Selfloops and Relive. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.Connectivity:Wireless connectivity: Bluetooth, ANT+Supported Bluetooth sensors: HRM, Speed, CadenceSupported ANT+ sensors: HRM, Speed, Cadence, PowerBryton Active App: via Bluetooth Low Energy (iOS & Android)Automatic activity upload: via Bryton Active AppUpdate Software: via Bryton Update ToolAuto Sync to 3rd Party Platform: Strava, TrainingPeaks, Selfloops, ReliveGolden Cheetah Compatible
If you re looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider420 will pair with all major electronic shifting systems from Shimano Di2, SRAM ETap/AXS & Campagnolo EPS to clearly show gearing information and battery life too. Packed full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full global GNSS, the Rider420 will work where ever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider420.N.B. Sensors are not included, but available separately.Supports up to 80+ functions35 hours of battery life2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Smart Notifications (SMS, Calls & Email)Supports Full GNSS (Global Satellites)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for accurate altitudeAuto Altitude Calibration by GPSANT+/BLE dual band support for all sensorsPedal Power Meter compatibleHeart Rate & Power meter zonesElectronic Shifting supportANT+ FE-C Smart Indoor Trainer supportWorkouts Planning, TrainingPeaks Workout Auto SyncTrack & Turn-by-turn NavigationDistance to next POI IndicationAutomatic upload to STRAVA / / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box:Rider 420 Main UnitUSB CableBike MountSafety LanyardQuick Start GuideSimply Precise - Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3 high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go!Crystal Clear Display - Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.Lead the Way - Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way.Stay Motivated with POI/Peak Info - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing.Absolute Precision - The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 80+ Functions - Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.TrainingPeaks Workout Support - To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.ESS Support - Electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette.Smart Trainer Compatibility - With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally, the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer.Power Meter Pedal Support - The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.
If you re looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider420 will pair with all major electronic shifting systems from Shimano Di2, SRAM ETap/AXS & Campagnolo EPS to clearly show gearing information and battery life too. Packed full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full global GNSS, the Rider420 will work where ever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider420.The Rider 420 H bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor in the box.Supports up to 80+ functions35 hours of battery life2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Smart Notifications (SMS, Calls & Email)Supports Full GNSS (Global Satellites)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for accurate altitudeAuto Altitude Calibration by GPSANT+/BLE dual band support for all sensors Pedal Power Meter compatibleHeart Rate & Powermeter zonesElectronic Shifting supportANT+ FE-C Smart Indoor Trainer supportWorkouts Planning, TrainingPeaks Workout Auto SyncTrack & Turn-by-turn NavigationDistance to next POI IndicationAutomatic upload to STRAVA / / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box:Rider 420 Main UnitANT+/BLE Smart Heart Rate MonitorUSB CableBike MountSafety LanyardQuick Start GuideSimply Precise - Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3 high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go!Crystal Clear Display - Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.Lead the Way - Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way.Stay Motivated with POI/Peak Info - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing.Absolute Precision - The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass (Russia), BDS(China), Galileo (Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 80+ Functions - Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.TrainingPeaks Workout Support - To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.ESS Support - Electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette.Smart Trainer Compatibility - With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally, the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer.Power Meter Pedal Support - The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s Strava, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.
If you re looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider420 will pair with all major electronic shifting systems from Shimano Di2, SRAM ETtap/AXS & Campagnolo EPS to clearly show gearing information and battery life too. Packed full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full global GNSS, the Rider420 will work where ever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider420.The Rider 420T bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor & Cadence sensor in the box.Supports up to 80+ functions35 hours of battery life2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Smart Notifications (SMS, Calls & Email)Supports Full GNSS (Global Satellites)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for accurate altitudeAuto Altitude Calibration by GPSANT+/BLE dual band support for all sensorsPedal Power Meter compatibleHeart Rate & Power meter zonesElectronic Shifting supportANT+ FE-C Smart Indoor Trainer supportWorkouts Planning, TrainingPeaks Workout Auto SyncTrack & Turn-by-turn NavigationDistance to next POI IndicationAutomatic upload to STRAVA / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box:Rider 420 Main UnitANT+/BLE Smart Heart Rate MonitorANT+/BLE Smart Cadence SensorUSB CableBike MountSafety LanyardQuick Start GuideSimply Precise - Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3 high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go!Crystal Clear Display - Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.Lead the Way - Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way.Stay Motivated with POI/Peak Info - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. Absolute Precision - The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass (Russia), BDS(China), Galileo (Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 80+ Functions - Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.TrainingPeaks Workout Support - To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.ESS Support - Electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette.Smart Trainer Compatibility - With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally, the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer.Power Meter Pedal Support - The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as Strava, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.
Designed for demanding cyclists looking for powerful new features and technologies, the all new Rider 750 excites with pre-loaded maps for online navigation and a range of advanced training features well beyond its price tag. The Rider750 also includes new features such as the Bike Radar System and full support for smart trainer bikes as well as compatibility with all of your Bluetooth and ANT+ sensors including all brands of Power meters. With an interactive graphical user interface (GUI) with easy-to-understand icons on a bright 2.8-inch colour touch screen, the Rider 750 offers a compelling user experience. It combines powerful features such as online navigation with pre-loaded maps of the most important regions and address entry by voice command with new technologies such as ANT+ FE-C (Fitness Equipment Control) for smart exercise bikes, 3 highly customizable bike profiles and support for Bike Radar systems. Furthermore, the Rider 750 E is compatible with Shimano Steps and can show the status of your e-bike on the display.The Rider 750 T bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor + Speed & Cadence sensors in the box.2.8-inch colour touch screen with graphical user interface (GUI)Online navigation with OSMOnline search by voice commandGoogle fuzzy searchDownloadable world mapsRoute tracking with POI/peak informationIndoor trainer compatible with ANT+/FE-C connectivity to give control of the Smart trainersVirtual ride simulationTraining with TrainingPeaks3 quickly changeable profilesAutomatic sensor scanWireless connections - BLE/ANT+/ANT+ FE-C / WLANESS supportSupport of Bike Radar SystemsSupport for e-bike (Shimano Steps)In the Box:Rider 750 Main UnitUSB CableBike Mount + Sport Out Front MountBluetooth/Ant+ Heart Rate MonitorBluetooth/Ant+ Speed SensorBluetooth/Ant+ Cadence SensorSafety LanyardQuick Start GuideVersatility at its Core - For cyclists seeking powerful new features and technologies, the Rider 750 incorporates online navigation with preloaded maps and advanced trainings, in combination with new integrations such as Bike Radar System and Smart Trainer support as well as dynamic sensor support.Colour Touchscreen with GUI - Built with a large 2.8 colour touch screen, the Rider 750 incorporates a new intuitive Graphical User Interface (GUI) with dynamic colours corresponding to customized HR / Power zones and easy-to-understand icons. Incorporating both a classic cycling page mode as well as a Graphical Mode for viewing cycling data in a vivid multi-coloured graphical setup.Online Navigation with OSM - Using downloadable OpenStreetMaps (OSM), Rider 750 provides location and detailed direction data at a glance. When using the navigation feature, you can view detailed turn-by-turn route guidance, including distance and direction information before every turn, and, when riding off route, the Rider 750 will automatically reroute to help get the ride back on track.Online Voice Search - With connection to the internet, you can use your voice to search for locations on the Rider 750, eliminating the need to use on-screen keyboards. Available in over 100 languages, the voice search features offer a faster, more intuitive and more convenient to find addresses or POIs.Follow Track with POI/Peak Information - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info using the Bryton Active App, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.Virtual Ride - Experience endless possibilities from the comfort of home with Virtual Track Simulation. Utilizing ANT+ FE-C compatibility, the Rider 750 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience.Smart Trainer Workout - Easily create custom virtual workouts for smart trainers with the Rider 750 at home! Training plans can be built with the Bryton Active App and downloaded directly to the Rider 750. With ANT+ FE-C support, the Rider 750 will communicate with your smart trainer to simulate the resistance from the training plan.Smart Trainer Control - Control your smart trainer right from the Rider 750. Customize the trainer's resistance level to fit your training goals or set the target power to achieve your desired wattage.TrainingPeaks Workout - To make training easier than ever, Rider 750 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 750 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.3 Easy-to-Switch Profiles - Now with support for up to 3 bike profiles, it is easier than ever to customize your device for any type of setup. Settings for each profile can be completely modified, including the ability to rename each profile, for any type of cycling.Auto Sensor Scan - After pairing multiple sensors, the Rider 750 will employ the collective sensor pool to automatically scan for nearby active sensors. Simply confirm the sensor connection with the active sensor and it is ready to go. Using the Bryton Active app, sensor names can be customized for easy recognition.ESS Support - The Rider 750 supports electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life (such as on the ESS), are displayed immediately on the Rider 750, eliminating the need to manually check the crankset and cassette.Bike Radar Support - The Rider 750 supports ANT+ Radar after simple pairing. While in the Meter Page, the radar strip will display approaching vehicles, utilizing the Rider 750 s vivid colour screen for easy-to-understand vehicle icons and colour changes for status, as well as include 3 levels of warning with audio notifications.E-Bike Support - The Rider 750 Incorporating E-Bike support for Shimano Steps, displays E-Bike data for over 160 bicycle brands. It supports ANT+ Radar which displays approaching vehicles through the Rider 750 s vivid screen. It includes 3 warning levels with audio notifications.Sync to Bryton Active App - Enjoy seamless over-the-air synchronization to Bryton Active. Workout data can be automatically synced via WLAN directly from the Rider 750 or via Bluetooth from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. Additionally, using the Bryton Active App, it s possible to sync and plan workouts, downloads planned trips and much more. Also, after simple setup, STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync from your Bryton Active account make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 750 recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 750 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.