Dial-in your Seatpost for the Terrain Ahead A wireless dropper seatpost guarantees more fun and more safety on technical trails by letting you instantly dial-in your saddle height to suit the terrain ahead, with its 150mms of smooth travel. Once you navigate the technical section, one flick of a finger will set your saddle back to its perfect: that's optimal riding efficiency from this Magura Vyron Elect Wireless Remote Dropper. Wireless Operations Remote The Magura Vyron Elect Wireless Remote Dropper Post utilises Magura's eLECT Remote with ANT+ wireless technology. You can mount the wireless remote on either side of your cockpit. If you also have a Magura suspension fork and/or shock unit with eLECT functions on your bike, you can choose what you prefer: one eLECT remote for the Vyron wireless dropper post and another for forks and/or shock(s) – or you can use all three buttons on a single remote to control every aspect. That's full bike control at the touch of a button. Rechargeable Battery This wireless dropper seatpost has a rechargeable battery that needs topping up after approximately 400 actuations. It contains a motion sensor that puts it to sleep mode to save battery power when the bike is not moving. The battery will recharge from empty in around 3 hours via the micro USB port.
This superb tool is designed to specifically loosen and tighten your lockring's ring in the chainring mounting. Additionally, it comes in handy if you need to remove your spider or sprocket to gain access to your e-bikes motor.
This top-notch kit features a 250ml bottle of Magura Royal Blood hydraulic mineral oil, syringe and fitting adaptors for the bleedtube.
QM 7 Adaptor: 203mm PM 6” fork mount Adapts Post-mount (PM) caliper to Post-mount (PM) fork mount (6") for use with 203mm rotor Includes Mounting Bolts Weight: 34g QM 10 Adaptor: 180mm IS rear frame mount Adapts Post-mount (PM) caliper to International Standard (IS) rear mount; for use with 180mm rotor Includes Mounting Bolts Weight: 37g QM 11 Adaptor: 160mm IS 6” fork mount + 203mm 8” Fox 40 fork mount Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (8"/203mm, e.g. Fox 40), and adapts PM caliper to IS front fork for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30g QM 12 Adaptor: 180mm IS 6” fork mount + 160mm IS rear frame mount (not PM) Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (6"/160mm) for use with 180mm rotor in front, and adapts PM caliper to IS frame rear for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30g QM + 20 Adaptor: 180mm/PM 6” 160mm/PM 5” Includes Mounting Bolts
Easy-to-fit, this simple adapter presses on to your remote to improve the size and angle of your switch, for a more confident dropping performance.
This superb model is specifically designed for use with rim brakes for excellent braking performance. Additionally, it measures 2.3m and is a genuine Magura replacement part.
One look is enough as the amazing design says it all: the Storm will set a new benchmark when it comes to weight, performance and durability. Combining the wealth of experience and the latest results of Mission Performance, Magura have achieved a maximum of stopping power, control and ventilation at a reduced weight (10% weight saving compared to old model).
The superb Magura Storm HC rotor ensures you'll enjoy superb braking performance from your bike's brakes under high braking power. It also comes with T25 mounting screws.
These superb brakes feature TPA technology for tool-less pad wear adjustment and are completed by EBT technology for super easy bleeding. Additionally, their flip-flop design provides super-fast installation while its lightweight 2-finger aluminium lever blade makes it a master of its class. This is ideal for replacing your old or existing model, so you can enjoy smooth and powerful braking performance.
There are two options available to select: Magura Centerlock Lockring for QR Axle Part Number: 2701373 Magura Centerlock Lockring for TA Axle Part Number: 2701374
These high-quality caliper covers are ideal for replacing your old or worn-out existing model on your Magura hydraulic disc brakes. Genuine Magura parts.
This top-quality Magura mini service kit contains everything you need to bleed your Magura disc brakes so they'll perform at their best again.
Optimised for use on e-bikes, this brake disc rotor provides enhanced performance and stability, while also reducing vibrations. The MDR-C rotor is the all-rounder in the Magura e-bike optimised portfolio, for city, trail and e-bike. An additional rigid element above the 6-hole mounting reduces vibration during braking, resulting in less noise. Heat resistance and stability have also been enhanced. Manufacturer's Part Numbers: 2701918 Silver 180mm 2701919 Silver 203mm 2701917 Silver 160mm
Magura O-Rings for banjo hose fitting.
The MT Trail is around 15% lighter than the MT7 and only 5% heavier over the MT8 - but offers 100% trail performance. This is a perfect choice of a replacement or upgrade for your old or worn out existing model, so you can get back to fast and reliable braking performance. Technologies: Carbotecture SL: Carbon fibres are extremely light, impact-resistant, shatter-proof and have the highest degree of bending strength in all the materials used in bike and motorsports components today. There is no better material to meet the demands placed on today's high-tech brakes. Weight Ratio Performance: MAGURA brakes are characterized by their high degree of thermal resistance, achieved through optimal weight allocation. This is optimal material usage and best-in-class lightweight construction where it's really needed. magnetiXchange: magnetic pistons fit perfectly into the brake caliper, guaranteeing quick and easy brake pad replacement. OPD: Caliper in one-piece design. EBT Easy Bleed Technology: easy and fast bleeding. Shift Mix: for mounting SRAM Triggers. The brake is delivered filled and bled. Please pay attention to the maximum disc diameter recommended for your fork / frame. Note: The brake is delivered without adapter and without disc rotor. These parts are sold separately. The brake hose can be easily cut to the required length.
The braking force of 4 pistons provides high stability to ensure your s-pedelec is equipped to stop safely and reliably. It is much more than just a basic brake; it features a mechanical switch in the brake bracket which activates the brake light before deceleration begins, and also controls the drive cut-out for maximum safety too.
This genuine Magura brake lever has been specially designed for road cyclists. Ideal for replacing your existing 2-finger lever, this top-notch model has been made from strong and durable aluminium construction for superb braking performance.
This very comfortable, ergonomic lever is constructed from carbotecture that's extremely light, impact resistant and shatter-proof, so you can enjoy a maximum braking performance. Additionally, it features the highest degree of bending strength and has been used in both bike and motorsports components today. Finally, this is a superb replacement for your old model and its better material will meet the demands placed on today's high-tech brakes.
This handlebar clamp has been specially designed as a replacement for Magura HS11/HS33 disc brake levers. Genuine Magura spare part. Please Note: Bolts are not included.