This is a genuine Nukeproof replacement Chainstay/Seatstay Pivot Axle Kit for the Nukeproof Mega AM and TR Frames.
The highly effective formula gest to work immediately and easily dissolves grease, oil and grime. A final blast of this Drivetrain Degreaser will wash away all contaminated residue, leaving only a light, corrosion-resistant protective coating. Fenwick’s Fast Blast is suitable for use on chains, gear mechanisms, cassettes, and chainsets.
When used on Presta drilled rims (valve hole diameter: 6.5mm), the rubber valve base ensures a perfect air-tightness simply tightening the valve on the rim (with its nut), without any additional adapter. When used on Presta drilled with a wider (> 6.5mm) inside hole, or when used on Schrader drilled rims (valve hole diameter: 8.5mm), Effetto recommend fitting the conic adapter on the valve before inserting it into the rim. Use the metal washer on the outside of the rim, before tightening the valve nut.
Latest technology degreaser and cleaner that removes dirt and grease without damaging fragile plastic and rubber components. Additionally, it is strong enough for the grimiest metal parts, yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers and painted surfaces. Finally, its powerful soy-extracted solvents break down grease, grime, and stubborn soils with amazing ease and will biodegrade rapidly when they get in the environment.
This is a genuine Vitus replacement gear hanger that's specifically designed for use with the 2018-19 Venon frames. It is ideal for replacing your old or worn-out existing model. Click here to view and download the Gear Hanger Cheat Sheet to ensure compatibility with all Vitus hangers.
Created for myopic correction (short-sightedness), the HUUB Altair Prescription Lens are made in increments of 0.5, from -1.50 to -6.00. Giving you crystal clear vision for maximum performance in the water. With interchangeable lenses, you can easily swap out the original lens of the Altair Goggles and match your prescription. Made from high-grade polycarbonate, these lenses are highly durable and feature a smoked lens, anti-fog coating and U.V protection so your vision is always razor-sharp, and your eyes are shielded and safe from the sun's powerful rays when open water swimming.
Created for myopic correction (short-sightedness), the HUUB Altair Prescription Lens are made in increments of 0.5, from -1.50 to -6.00. Giving you crystal clear vision for maximum performance in the water. With interchangeable lenses, you can easily swap out the original lens of the Altair Goggles and match your prescription. Made from high-grade polycarbonate, these lenses are highly durable and feature a smoked lens, anti-fog coating and U.V protection so your vision is always razor-sharp, and your eyes are shielded and safe from the sun's powerful rays when open water swimming.
Engineered for maximum stopping power, these brake pads feature SwissStop's Disc E compound. This means that you'll benefit from its consistent braking performance and low weight. Combining an extremely high endurance pad compound with an organic formula, these brake pads give you long lasting braking performance with low noise. Compatibility: Shimano XTR BR-M9120 XT BR-M8120,BR-M8020 SLX BR-M7120 SAINT BR-M820,BR-M810 ZEE BR-M640 BR-MT520 TRP Quadiem Quadiem SL Slate T4 Tektro HD-M750 HD-M745 HD-M735 HD-E725 ATTENTION: PADS MUST BE BEDDED IN TO ACHIEVE OPTIMAL PERFORMANCE Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times. Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times. Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2. CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.
Engineered for maximum stopping power, these brake pads feature SwissStop's Disc E compound. This means that you'll benefit from its consistent braking performance and low weight. Combining an extremely high endurance pad compound with an organic formula, these brake pads give you long lasting braking performance with low noise. Compatibility: Avid XO Trail Elixir 9 Trail Elixir 7 Trail SRAM G2 Ultimate,RSC Guide Ultimate,RSC,RS,R,T ATTENTION: PADS MUST BE BEDDED IN TO ACHIEVE OPTIMAL PERFORMANCE Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times. Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times. Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2. CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.
Engineered for maximum stopping power, these brake pads feature SwissStop's Disc E compound. This means that you'll benefit from its consistent braking performance and low weight. Combining an extremely high endurance pad compound with an organic formula, these brake pads give you long lasting braking performance with low noise. Compatibility: Shimano Dura Ace BR-R9170 Ultegra BR-R8070 105 BR-R7070 Tiagra BR-4770 GRX BR-RX810,BR-RX400 XTR BR-M9100 Metrea BR-U5000 BR-RS805 BR-RS505 BR-RS405 BR-RS305 Tektro HD-R310 REVER MCX1 Flat Mount ATTENTION: PADS MUST BE BEDDED IN TO ACHIEVE OPTIMAL PERFORMANCE Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times. Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times. Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2. CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.
Engineered for maximum stopping power, these brake pads feature SwissStop's Disc E compound. This means that you'll benefit from its consistent braking performance and low weight. Combining an extremely high endurance pad compound with an organic formula, these brake pads give you long lasting braking performance with low noise. Compatibility: SRAM Red eTap AXS (Gen. 1 'Mono-Bloc' caliper),eTap HRD,Red 22 HRD (B1) Force Force 22 HRD (B1),Force 1 HRD Rival Rival 22 HRD (B1),Rival 1 HRD Apex Apex 1 HRD S-700 HRD (B1) Level Ultimate,TLM (2016-2019) Technologies: Disc E Compound: Long lasting, high endurance pad compound Very easy modulation of braking force High temperature stability for consistent brake power Organic formula is low noise and rotor friendly ATTENTION: PADS MUST BE BEDDED IN TO ACHIEVE OPTIMAL PERFORMANCE Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times. Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times. Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2. CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.
This riser bar features a robust alloy construction, which makes it ideal at handling all the intensity that comes with blasting across the mountain at speed.
These pawls and springs come as a replacement set of six pawls and six springs, which includes the plastic cover for the Nukeproof Horizon V2 freehub. Nukeproof offers two options which are loud or quiet. This is due to Nukeproof hubs coming with the loud pawls and springs pre-installed as standard, but there is also the option for a quieter ride if you prefer it.
This rear axle is available in 142mm, 148mm and 150mm axle options. You will need to choose the correct axle to suit your hub spacing.
142mm, 148mm and 150mm axle options available. You will need to choose the correct axle to suit your hub spacing. Please note that the 148mm axle you require will depend if you are using a HG / XD or Microspline freehub.
These end caps can be used to convert your hub to a different spacing or replace a lost cap. This makes them perfect as a replacement or for riders who want to transform their hub set-up. Compatibility Chart & How to Fit End Caps Click here to determine which hubs can be converted, as the caps only fit the original specific hub options. End Caps: Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Horizon V2 hubs
These end caps can be used to convert your hub to a different spacing or replace a lost cap. Compatibility Chart & How to Fit End Caps Please click here to determine which hubs can be converted, as the caps only fit the original specific hub options. End Caps: Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.
Leatt’s Tear-Off Laminated pack includes 2 x 7 pieces and the visors are compatible with all Leatt goggles.
Although specifically designed for Spank’s Spoon hubs, this kit is also suitable for use on most rear hubs that have a “Shimano” style 9-11 speed freehub. The sprocket works best with a 3/32" chain, but will also operate with a 1/8" sized chain too.
Ready to enhance the feel of any road bike, the SRAM SuperSuede bar tape will also give your bike a quality look.