Featuring an adapted head which allows the tyre insert to sit on top of the valve, the shape of the head allows for easy inflation and deflation. Each valve has a removable core allowing you to get maximum air flow from your tubeless pump or CO2 cartridge. The specially-designed custom cap features a core remover built in so you can remove & tighten the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to tighten the valve in the rim. An O-ring is also provided which sits against the outside of the rim and provides an airtight seal while preventing damage to the rim from the nut on the valve. How to Install Remove valve cap and nut, insert valve through rim, fit O-ring to valve then thread nut on and tighten by hand.
Bag of 100 gear ferrules
This chainring features a rock-solid aluminium construction, which has been put through a CNC-machining process to deliver maximum strength without adding any unnecessary weight to your mountain bike. Coming equipped with the highly sought after narrow/wide Snaggletooth profile, this chainring can be combined with any modern day clutch derailleur without worrying about dropping your chain. Please Note: This Chainring is for use with Race Face Cinch cranks and is compatible with Shimano 12 speed mountain bike chains. It is designed for use within a Shimano 1x12 speed drivetrain but it is not compatible with Shimano brand cranksets.
If you want to restore your Horizon CS pedal's peformance to its original level, this genuine replacement Nukeproof rebuild kit is sure to do the job.
Following on from the success of the Nukeproof A15 durometer Sam Hill Series Grips, which Sam rode to overall EWS victory in 2017, Sam asked Nukeproof to develop an even softer compound for long days on the bike riding the toughest Enduro stages in the world. These are Sam’s special edition oil slick clamp version. Perfect for Enduro Racing Extra Soft Compound Sam has always been particular about his setup and Nukeproof has taken great pride in developing no-nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together, they have helped to produce World level products that everyone can use. These grips were first used by Sam in round 4 of the 2018 EWS where he took the win and has been using them ever since. After that race he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips.
Easy to install, the Ritchey Carbon Spacers give you the freedom to raise your stem in order to set your handlebars to an ideal height. This means you can enjoy a more rider-tuneable performance while they keep your steerer tube from moving around inside the head tube. What's most impressive is their unidirectional (UD) carbon fibre construction makes them incredibly stiff without adding unnecessary grams to your ride.
Replacement 1-bolt saddle cradle system for use with conventional railed saddles. Three options available.
This high-quality flat bar is engineered for the demands of mountain bike (MTB) riding and features a triple-butted 7050 aluminium construction for strong and dependable steering on the most demanding of terrains. Truvativ has also equipped this model with an anodised finish, so you can benefit from additional protection against corrosion in all-weather conditions. With a 580mm width and 5 degrees backsweep, this flat bar is a great choice of upgrade for riders who prefer race positioning on the trails.
These DMR Deathgrip Flange MTB grips feature a soft Kraton rubber construction, which makes them comfortable to hold onto during all-day epics in the mountains. Part of a collaboration between Brendan Fairclough and DMR, these grips aim to deliver next-level performance and dependability on your downhill (DH) or MTB adventures. Coming as a pair and weighing in at only 100g, the DMR Brendog Flanged Deathgrip is a great choice of upgrade for riders who want superior grip without any unnecessary weight. One final highlight of the DMR Deathgrip flange is its design features a tapered core, which means that there isn't any need for an outer lock ring.
Weighing in at a sensible 250g, the Tracker saddle strikes the ideal balance between lightness and comfort with a good amount of padding to ensure all-day comfort which is especially important if you ride a hardtail. The 277x142mm size is perfect for all mountain (AM) / enduro use and will suit the biggest range of rider sizes; being wide enough to provide great support and narrow enough to ensure that you can easily get your weight out and over the back wheel on a gnarly descent. The rounded shape prevents your clothes from getting snagged and the long flat and well-padded nose allows for comfy climbing when technical terrain requires more weight over the front wheel. MTB Saddle with ArcTech Suspension Technology Weight is kept down with Crn/Ti Alloy rails underneath as standard. These are connected to the shell via ArcTech suspension Technology: a system that allows for more base and rail flexibility, reducing trail buzz feedback to the rider. To further optimise comfort the Tracker features a high-density foam fill and a double-density nylon fibre injected base that is designed to flex under your sit bones and at the edges for pedalling efficiency. It also has a rising rear profile to support the pelvis and prevent back pain, a cut-out on the bottom and a channel on the top to relieve pressure on your sensitive bits and promote circulation on even the longest of rides. Kevlar Corners for Scuff Protection When riding hard, crashes happen and to keep your saddle looking good Ragley added Kevlar corners that are neatly tucked underneath to keep you dry and happy. The tough one-piece PU cover is stitch-free to prevent chafing and also helps to keep things watertight on wet and muddy rides. Finally, Ragley added an embossed Ragley Crest graphic design to the cover with colour coordinated graphics, bumpers and painted rails to give it a fresh and understated look. No soggy sofa, this is a performance perch built for knocks, spills and all-day comfort out on the trails. Manufacturer's Part Numbers: 5056305578756 Grey Silver 5056305578763 Black 5056305578770 Green 5056305578787 Blue
The smaller ShutOut frame is formed from lightweight, yet durable, Grilamid TR-90 frame which provides all-day comfort. The frame also features Tifosi’s Glide technology which ensures an anti-bounce fit. Optimising your vision, the decentred and polycarbonate lenes are engineered for optical clarity with 100% UVA/UVB protection.
Engineered for fast-paced trail-riding, this inner chainring features an aluminium construction. This makes it perfect at withstanding all the intensity that comes with blasting across the mountain bike trails at speed. Blackspire has also put this tough MTB chainring through a CNC-machining and anodising process, which shaves off any excess weight as well as protecting it against corrosion. This makes it the ultimate choice of upgrade for riders who want to enjoy flawless shifting performance in all-weather conditions. Manufacturer Part Numbers: 22T: 595-4222 24T: 595-4242 26T: 595-4246
The Jetboil Coffee Press with a silicone ring guarantees the best brew when out exploring, alternatively it can even be used to steam your favourite fish and vegetables when camp side. The stem and basket also detach to easily stow in your cup. Plus, this size coffee press is compatible with the Jetboil Zip, Flash, and MicroMo, along with .8L and 1L tall spare cups.
This Stolen Sumo III sprocket with guard combo features a high-quality Sumo III BMX sprocket that's engineered with 6061 aluminium. This makes it more than capable of handling all the abuse that's associated with nailing your favourite tricks. Stolen has also included a Thermalite guard, which protects the sprocket as you ride. Coming complete with a super strong CrMo steel bolt, everything is held in place securely for smooth and dependable performance on every ride.
The material used will not harden, break down or migrate and will help dampen road vibration transmitted through the bars to your hands. This makes the Fizik Bar Gel set the ideal addition to your road bike.
This product has been developed with road cyclists in mind for the ultimate racing experience. Thanks to its Microtex construction, the Fizik Vento MicroTex Tacky is the thinnest option for pin-sharp handling and control. Its tacky finish provides a sticky nonslip surface with a raised texture for ultimate grip in any riding conditions.
Clip to your pocket, sleeve, sock, laces, backpack etc, to ensure you're seen and safe on the roads or trails. Latest COB Technology Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time. Integrated USB Connector Plus Free plugs directly into USB-A ports & is designed to be exposed to the elements. Wearable Clip Use the clip to attach the lights to your hat, shirt, shorts, socks, headband, backpack, dog collar (we could go on). Charge Indicators When Plus Free is running low on battery, a red ring will light up around the button. This ring will also show when charging, and turn off once fully charged. Specifications Bulb Type: Chip On Board (COB) LEDs Light Outout: 40 lumens / 20 lumens Run Time: Eco-Flash: 40 hrs, Steady: 2 hrs Charge Time: 2 hrs Waterproof: Yes, IP67 rating Light Modes: 5 Rechargeable: Yes (integrated USB-A connector) Dimensions: H: 66 mm x W: 24 mm x L: 14 mm Weight: 17 gm / 0.6 oz Low Battery Indicator: Yes Opertating Temp: -20 to 50 °C / -4 to 122 °F MacBook Air Owners: The magnet in your MacBook Air responds to the magnet in the Plus Free light and turns off the screen when it's plugged in to charge. This does not harm your computer (it just thinks the lid is closed).
With a disc brake pad adapter that retains the brake pads when the disc is removed, this excellent tool makes vital maintenance work on your wheel a little easier. Please Note: For the 135mm MTB option, the product may be delivered with either a blue or a red coloured chain guide wheel.
The guard can be removed or fitted in seconds with its quick release mounting