With a maximum pressure of 160psi, its sturdy steel base improves stability while its steel barrel allows you to pump efficiently. Ideal for use at home or keeping in the boot of your car, it also includes a large and easy to read top-mounted pressure gauge.
Rechargeable high power bike light with a brightness of up 220 lumens and a run-time of up to 70 hours. Easy attach and detach from the handlebar with the elastic silicone band. The battery indicator and 'on' button are situated on top which also doubles as the clasp. Press and hold for 0.7 seconds to turn the light on or off. One single click switches between the four modes available. Fast Charging Urban Light with 220-Lumens at Max Power On the brightest steady light setting, the light produces 220 lumens for one hour. In the power saving and flashing modes, the light can last up to lengthy 70 hours. It takes only two hours to charge from flat to full via a convenient USB charging cable, which is included. The design of the glass, which spills over the sides, ensures a wide range of light, not only in front of the cyclist but reflects off to the sides. This results in cyclists peace of mind that the light provides them with clear visibility of the roads as well as being visible to other travellers at 180 degrees around them. The completely weather resistant light (IP44) will show you the way through rain, hail or snow. Fits handlebar diameters from 22 to 42 mm. Modes: Modes Brightness (lumen) Runtime (hours) Steady High 220 1 Flashing High 220 3 Steady Mid 100 2.5 Flashing Low 15 70 Steady Low 15 15 Awarded with the German ABC Design award for outstanding design, the Curve comes in a front and rear (sold separately) version. The rear sits horizontally on the seatpost and the front version vertically on the handlebar.
The Nukeproof Over Stem mount has been fully designed in house to install your Garmin and Wahoo Element computers to your bike. Designed specifically around our Horizon stem to ensure a clean and snug fit, the mount will also fit most other stem models as well. This will suit riders wishing to place their computer ahead of the steerer tube for more visibility but not in front of the bars where the computer can be vulnerable to impacts while Enduro or Downhill riding. To install the mount to your bike, you will need 7mm of excess steerer tube above your stem and is very easy to install. Remove current top cap and bolt Ensure you have at least 7mm of excess steerer Place Over Stem mount to steerer tube Fit any additional headset spacers if required Install polymer ¼ turn insert in orientation to suit Garmin or Wahoo Reinstall top cap and bolt
Manufactured from 7075 aluminium and featuring a stealthy black finish, these chainrings will make your track bike look as well as it performs.
Tifosi Eyewear’s Swank Smoke Lens Sunglasses come with large, duel polycarbonate lenses which offer full UV protection with glare guard technology for a clarity vision. The lens’ construction which also ensures a great level of durability with excellent impact resistance. Meanwhile, the Grilamid TR90 frame keeps the glasses light and flexible while also retaining a great level of strength and durability. To stabilise the sunglasses the interior of the frame comes with hydrophilic rubber detailing that supports the glasses position on the face even in torrential rain and intense conditions.
Maximum grip is ensured by the replaceable metal pins and the large platform provides plenty of support for comfortable pedalling.
The Lifeline brake hose kits are replacement kits for hydraulic brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn. There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit: Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper Olive Spec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper Olive Spec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded Olives Spec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper Olives
The LifeLine Metal Bike Display Stand is very easy to use. It holds your bike between the frame and wheel on the axle, on the non-drive side with the wheel sitting in the base's groove. With ease of use and its compact nature the LifeLine Metal Bike Display Stand will proudly show your bike and tuck away when it's not in use.
Compatible with Deda adaptor for Di2 Battery.
The LifeLine Pro BB 30 Removal Tool uses a Collet system to ensures snug engagement with the bearing and make this easy to use.
The LifeLine Pro Ratchet Stash comes with a T-Bar Ratchet Tool and six tool bits (4/5/6mm Hex; T25/T30 torx bit; PH2 screwdriver head) that will help you tighten loose bolts and screws on your ride.
A one-size, original Vitus guard for your 2018 E-Sommet, this will offer great protection in storage or transit against scuffs, chips and other cosmetic damage.
Genuine Vitus replacement covers for guarding your chainstay and seatstay safe from scratches, scuffs and sun-damage when storing your bike away or transporting it to your next race.
Top quality, original one-size Vitus replacement covers for keeping your chainstay and seatstay safe from damage on your 29" Escarpe.
The LifeLine Lightweight Carbon Water Bottle Cage shape allows for easy access from either side, whilst the bottle retention system features a small rubber gripper to ensure your bottle stays securely in place.
The LifeLine Essential Mini Torque Wrench allows you to apply a calibrated tension of 5Nm to your component clamps; a common recommendation amount stem, seatpost and groupset manufacturers. This helps prevent excessive clamping which can damage both components and tools.
Shifter Style - 1x Gears The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit and actuates from beneath the handlebar meaning that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur. Paddle Style - 2x/3x Gears The compact paddle style remote lever is designed to sit next to your front shifter and actuates from the top of the handlebar, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.
There’s a reason why Enertor is the only insole worn by Usain Bolt. Designed by leading podiatrists and the only insole to use patented D3O smart material, Enertor insoles offer the most advanced protection yet against injuries. Engineered by the experts Enertor insoles are proven to help reduce foot and heel pain for over 91% of wearers. A recent study showed that our insoles helped to heal over 75% of those suffering from Plantar Fasciitis Unrivalled shock absorption for advanced impact protection. D3O is a patented smart material that cushions the foot when moved slowly, but on impact, the molecules lock together to absorb and disperse energy before instantly returning to its flexible state. This innovative new material also delivers 36% energy return for improved performance and shorter recovery times.
Please note that this hanger DOES NOT come with the fixing bolt