Use Race Oil to lubricate the chain, drivetrain and other moving parts. The lubricant penetrates immediately and does not drip from the chain when applied. Race Oil is suitable for use after having cleaned the chain and drivetrain with Chain Cleaner. Use Race Oil for general lubrication applications too.
Part of a comprehensive range of freewheel and bottom bracket removal tools, the Park Tool cassette lockring tool has a one-inch base that easily fits a wrench or a bench vice. Thin Oversized centre hole and thin wall design allows use without removal of cones and locknuts Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation.
Carogna Remover is a modern solvent that will soften & gelify dried-out mastic or glues from tubular rims. Then its easier to remove this debris making for the optimal (clean) surface for installation of new Effetto tub tape.
When the elements you ride in take their toll on your chain, removing and reinstalling the masterlink can become a more difficult task than it ought to be. The specially designed MLP-1.2 Pliers make sure this tricky job is a thing of the past. A simple insertion of the tool's specially measured jaws right into the masterlink lets you squeeze the handles to open the link to take it out, while pulling them apart to closes the link to secure it back in place. A time and effort saving tool, the Master Link Pliers MLP-1.2 is a handy tool for back-up when you need it.
A percentage of the proceeds from the sales of this grip go to support the Moab Trails Alliance and trail building in Moab. Lock-on grips include the grips, clamps, screws and plugs.
The mount is fully adjustable allowsing you a variety of customisable positions so that you can place your cycling computer in a position that suits you and your cycling best. It frees up a lot of your frames precious space and is made from aluminium for ultimate durability.
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold bottom headset cups are available in both internal and external types for both standard and tapered steerer tubes, enabling you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight. They include split alloy crown races for easy installation and the 1.5” versions can be easily adapted to work with alternative fork steerer types with the addition of the 1 1/8" to 1.5" crown race adaptor (reducer) if required (sold separately).
Manufactured from high-quality 6061aluminium, it uses a unique brass barrel that ensures a secure fit when the clamp is tightened up.
Extreme durability when your offroad adventure demands it. The XC821 brings together a welded joint and single eyelet spoke hole reinforcement to create one of the strongest offerings on the market. Designed for XC riders, this rim will certainly have the wind rushing past your face with its incredible speed. Technology: SUP (Soudé Usiné Process): After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish. UST TUBELESS READY: The UST concept improves traction, control and comfort while reducing inertia and flats.
The platform now has increased leading and trailing edge height with knurled traction patches above the axle body to increase overall traction. Along with this, an updated pin layout will ensure the rider’s foot remains ‘planted’ on the pedal to provide improved grip and performance. Light and Tough Flat Pedals These Neutron Evo Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair. Durable and Grippy Built using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip. Installation is done using an 8mm hex key. Click here for a Step by Step Installation Guide Spares Available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap
Designed in conjunction with 5-time downhill world champion Sam Hill, Nukeproof have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles. Prolonged Pedal Life The Horizon Pro has all the features found on the Horizon Sam Hill. Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services. Click here for a Step by Step Installation Guide
Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Click for compatibility chart.
Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Click for compatibility chart.
Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Click for compatibility chart.
Using toggles instead of poppers means that you are able to use the belt under wetsuits without the worry of losing your number. Each belt comes complete with three energy gel loops so you can keep your nutrition close to hand for when you need it.
Research on traditional sports drinks suggests that you can only consume 60g carbohydrate per hour. Using High5’s new generation Energy Drink Caffeine with 2:1 fructose and caffeine, you can consume substantially more carbohydrates, up to 100g per hour. The ingredients in Energy Drink Caffeine help sustain performance during tough endurance events and help maintain hydration by enhancing the absorption of water. Pro athletes choose Energy Drink Caffeine when endurance racing. Directions for Use Mix the powder into 500ml of water and shake well. Energy Drink Caffeine Hit is intended to be used as: a one-time caffeine hit, before or during training, towards the end of a long ride, to caffeine load before or during a major race.
Perfect for accurately measuring your performance with multiple metrics, and for adding a visual or competitive element to your indoor training. You can also import workout data from ANT+ devices. SETUP AND OPERATION The process of setting up your ANT+ training or racing platform will vary according to the software you choose. Many platforms will share the same basic steps: Install your chosen training software or virtual racing platform. Connect the LifeLine ANT+ USB Stick to your computer. Enter the setup or configuration menu within the software. Activate your ANT+ sensors. Ensure the sensors are active, an LED may illuminate on some sensor models. Ensure the battery in the sensor is charged. Using the LifeLine ANT+ stick, The software will detect active sensors and display them. The software may require you to specify the type of sensor.
An ideal upgrade or custom build component in a pristine matt silver finish.
Available in both 1.00mm and 2.0mm sizes, the Rotor Spacer is a worthy addition of any toolbox.