This Shimano inner brake cable is made with stainless steel precision ground round inner wire, ensuring it provides smooth action and high corrosion resistance.
This Shimano disc brake adaptor allows front Shimano disc calipers to be mounted to international standard front forks or post type forks and rear Shimano disc brake calipers to be mounted to international standard frames.
Fruity and refreshing, the HIGH5 Energy Gel Electrolytes are an easily digestible, scientifically formulated, multi-carbohydrate energy gel which keeps you energised during exercise. The gels also contain electrolytes, which replace key electrolytes during sweating, to keep you hydrated, including: sodium, potassium, magnesium, and chloride. Directions for Use Tear the top of the sachet and drink the gel directly from the sachet. For best results consume up to three sachets per hour during exercise, less if you are also using a sports drink.
Raising the bar for military standard, high precision bearings, some of the finest cycling components come standard with the Enduro Bearings MR 18307 bearing. It features hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with a low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
Ready for day-long sessions at your local skatepark, this replacement BMX hub guard is specifically developed for use with the Stolen Rampage wheel. Available in front and rear options to select, this model comes equipped with a hard-wearing thermalite build for an excellent balance of strength and durability, while also protecting your wheel from grind damage as you nail your favourite tricks. Thermalite BMX Hub Guard This model is kitted out with Stolen's proven Thermalite material. Thermalite is a long-lasting Nylon66 based material that is perfect for sliding and surviving high impacts. It is made to fit and protect Rampage front and rear hubs but it will also fit a bunch of other hubs too. Please choose the compatible option from the menu to suit your wheel. Stolen Rampage Thermalite Hub Guard (Male Front Option) This option fits 2016-present Rampage male wheels (including complete bike). Mounts replacing the lock and cone nut. Fits 10mm (3/8") axles, 68mm diameter. Features: Position: Front Axle Size: 3/8" Weight: 36g Stolen Rampage Thermalite Hub Guard (Female Front Option) This option fits 2017-present Rampage female axle wheels (including complete bike). Fits 14mm axles, 68mm diameter. Features: Position: Front Axle Size: 14mm Weight: 36g Stolen Rampage Thermalite Hub Guard (Rear Non-Drive-SideOption) This option fits Rampage Freecoaster and Cassette rear hubs (including complete bike). Mounts replacing the lock nut. Fits 14mm axles, 68mm diameter. Features: Position: Rear (Non-Drive-Side) Axle Size: 14mm Weight: 39g Manufacturer's Part Number: S939 Black Option 1 Rampage Front (Male) S940 Black Option 2 Rampage FA Front (Female) S941 Black Option 3 Rampage FC/Cassette Rear (Non-Drive-Side)
Ideal for use with 8-Speed mountain bike (MTB) rear derailleurs, this shifter is suited to cross country, all-mountain and general trail riding. Plus, it's compatible with Shimano 8-Speed MTB drivetrain components. Key Features: Standard Twist Type Shifter for MTB 8-Speed Rear 8-Speed MTB gear shifter Right Side: Index Features: Model No.: MS29-8R Cassette Compatibility: 8 Speed Bracket Material: Composite Optical Gear Display: N Compatibility: Shimano 8 Speed MTB Shifters Compatible
Ready for day-long sessions at your local skatepark, this BMX hub guard is specifically developed for use with the Stolen Rampage wheel. Available in front and rear options to select, this model comes equipped with a hard-wearing thermalite build with a CNC-machined chromoly (CrMo) steel core. As a result, it delivers an excellent balance of strength and durability, while also protecting your wheel from grind damage as you nail your favourite tricks. Thermalite BMX Hub Guard This model is kitted out with Stolen's proven Thermalite material that's moulded into a guard and pressed onto a CNC machined core. Thermalite is a long-lasting Nylon66 based material that is perfect for sliding and surviving high impacts. It is made to fit and protect Rampage front and rear hubs but it will also fit a bunch of other hubs too. Please choose the compatible option from the menu to suit your wheel. Stolen Rampage Thermalite Hub Guard (Male Front Option) This option fits 2016-present Rampage male wheels (including complete bike). Mounts replacing the lock and cone nut. Fits 10mm (3/8") axles, 68mm diameter. Features: Position: Front Axle Size: 3/8" Weight: 36g Stolen Rampage Thermalite Hub Guard (Female Front Option) This option fits 2017-present Rampage female axle wheels (including complete bike). Fits 14mm axles, 68mm diameter. Features: Position: Front Axle Size: 14mm Weight: 36g Stolen Rampage Thermalite Hub Guard (Rear Non-Drive Option) This option fits Rampage Freecoaster and Cassette rear hubs (including complete bike). Mounts replacing the lock nut. Fits 14mm axles, 68mm diameter. Features: Position: Rear (Non-Drive Side) Axle Size: 14mm Weight: 39g Manufacturer's Part Numbers: S929 Black Option 1 Male Front S930 Black Option 2 Female Front S931 Black Option 3 Rear Non-Drive
The ABEC3 6900 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The LifeLine TwinHead Allen Key is available in multiple sizes from 2 - 8mm and features a storage hole for organisation making this an essential tool for any mechanic, home or professional.
This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
The lever is ergonomically shaped and the mechanism uses a brass bush to make sure it has a smooth and consistent action which will last. Tech Tip: To confirm what size you need, remove your existing clamp from the frame and measure the diameter across the top of the hole that the seatpost fit in to. Alternatively, sometimes your bike's seatpost clamp size is stamped on the existing seatpost clamp.
This bike seatpost clamp is available in 28.6, 31.8, 34.9mm or 36.6mm sizes and comes in durable anodised black of silver. Please Note: The measurements listed in the sizing options are the internal measurement of each clamp. Each clamp is designed to clamp around to your bike's frame, so allow a few millimetres difference between your saddle seatpost and the clamp size you need. We recommend that you either measure your bike frame's seatube or check for any sizing information that may be stamped on your old clamp.
With a lightweight chassis and a compact footprint, the LifeLine Pioneer Mini pump fits in your bag or pannier with so little bulk you’ll barely notice it’s there until you need it. Perfect for long trips when weight and space are at a premium. The head is switchable to accommodate Presta and Schrader valve types and the barrel is rated up to 100PSI. A bottle cage mount bracket is included, simply install it onto the bottle cage mounts and never leave the house without it.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
Tubeless tyre systems are lighter than inner tube setups, they seal punctures instantly and allow you to run lower pressures without the risk of pinch-flat punctures; so you can ride faster for and spend less time fixing punctures at the side of the roads and trails. Quick, Easy and Mess-Free LifeLine Tubeless Tyre Sealant makes installing tubeless tyres quick, easy and mess-free. The 80ml and 150ml applicator packs are supplied with built-in Presta valve core extractors and specially shaped nozzles to deliver the sealant directly through the valve, eliminating messy spills. No scoops or syringes required. The formula is non-toxic, it includes Dupont kevlar additive to rapidly seal punctures and tears up to 5mm. It is compatible with all tubeless tyre systems. 80ml Applicator Pack includes enough sealant for a single road bike tyre (700c 25-32mm width). 150ml Applicator Pack includes enough sealant for a single MTB tyre (29” 2-4” width). The applicator packs can then be refilled with the 500ml or 950ml pack for subsequent tyres. Easy Delivery Of Tubeless Sealant Simply mount the tyre to the rim, remove the core from the valve, deliver the sealant through the valve and inflate the tyre with the LifeLine Airblast Tubeless Track pump or similar tubeless pump. Then rotate the wheel and lay it on either side to allow the sealant to cover the entire inner surface of the tyre. Pro Tip: Before adding the sealant, use a tubeless track pump to blast the tyre onto the wheel and seat the beads securely onto the rim. This way, there is no chance of any sealant drops or spills.
The Race Number Holder features an aluminium clamp, which fits neatly to a seatpost. Coming with Rubber O-ring that will fit securely around the seatpost, as well as bolts for fast and easy installation, LifeLine's Race Number Holder also features additional rubber protection for extra grip and to avoid damage to your seatpost. Perfect for the racing cyclist and the gran fondo goer.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
LifeLine inner tubes are made of high-quality butyl rubber and air leakage tested to ensure excellent reliability. Sizes Available: 26" x 2.2" - 2.5" Presta 48mm; ETRTO: 55/64-559 Weight: (+/- 10%) 26" x 2.2" - 2.5" Presta 48mm: 309±15g