Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
The PRO Cassette Removal Set is for installing and removing all types of Shimano Cassettes. Both are heat treated for durability and have rubberised handles to provide a comfortable and safe grip.Chain whip and lock ring tool remover set for holding cassettes and Freehubs when removing the lockingHeat treated tools for increased durabilityRubberised handles for comfortable gripIntegral safety pin on cassette remover reduces the risk of tool slipping when under loadDesigned to fit all Shimano cassettes
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
The Park Tool FR8C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and removes four notch freewheels from flip-flop BMX hubs with 30 x 1mm threads.
Manufacturing since 1989, Flinger Mudguards are specialists in production of high quality, light weight, impact resistant mudguards for road or MTB use.Round profile (compatible with modern frames and brake callipers)Kinked stays front and rear offer clearance for disc brakes or carriersSafety clip on front staysMudflap, reflectorFitting kit includedBlack 700 x 18-25c35mm ProfileAttention to details such as clearance for modern disc brakes or carrier racks, safety release clips, mudflaps front/rear and a CATEYE reflector make these guards the choice of the discerning all weather cyclist, keeping you dry and safe.Made from lightweight, flexible, impact resistant, polycarbonate with stainless steel v-stays and brackets. We increased the diameter of the stays to 4mm, this dramatically increases the overall stiffness of the guards. Flinger mudguards are the most rigid, stable guards on the market.
Manufacturing since 1989, Flinger Mudguards are specialists in production of high quality, light weight, impact resistant mudguards for road or MTB use.Round profile (compatible with modern frames and brake callipers)Kinked stays front and rear offer clearance for disc brakes or carriersSafety clip on front staysMudflaps, reflectorFitting kit includedBlack 700 x 32-40c50mm ProfileAttention to details such as clearance for modern disc brakes or carrier racks, safety release clips, mudflaps front/rear and a CATEYE reflector make these guards the choice of the discerning all weather cyclist, keeping you dry and safe. Made from Lightweight, Flexible, Impact resistant, Polycarbonate with Stainless steel V-stays and brackets. We increased the diameter of the stays to 4mm, this dramatically increases the overall stiffness of the guards. Flinger are the most rigid, stable guards on the market.
Light weight and burly, the Race Face Narrow/Wide chainring is more than just an oxymoron by name. Strong enough for downhill duties, yet light enough for XC whippets, the Race Face Narrow/Wide chainring is the solution to your woes. Machined from 7075 aluminium and tested in the deepest darkest forests of Vancouver you know this chainring will last.Performance enhancing Narrow/Wide tooth profiling enhances chain retention and creates a strong, secure platform to put power through, plus the stiff 4mm thick 7075-T6 aerospace grade strength aluminium is constructed in an i-beam cross section increasing load transfer without flexing. Coming complete with reversible laser etched graphics, you can decide whether you display the logo or run a more subtle set-up. Compatible For: 9, 10, 11 & 12 speed.Weights from 37g
Light weight and burly, the Race Face Narrow/Wide chainring is more than just an oxymoron by name. Strong enough for downhill duties, yet light enough for XC whippets, the Race Face Narrow/Wide chainring is the solution to your woes. Machined from 7075 aluminium and tested in the deepest darkest forests of Vancouver you know this chainring will last.Performance enhancing Narrow/Wide tooth profiling enhances chain retention and creates a strong, secure platform to put power through, plus the stiff 4mm thick 7075-T6 aerospace grade strength aluminium is constructed in an i-beam cross section increasing load transfer without flexing. Coming complete with reversible laser etched graphics, you can decide whether you display the logo or run a more subtle set-up. Compatible For: 9, 10, 11 & 12 speed.Weights from 37g
The Continental Grand Prix Tyre is a comfortable all-rounder that has been written into cycling history. With the PolyX-Breaker we introduce technological know-how from automotive manufacturing to the bicycle tyre sector. Polyester has been used successfully in car tyres for years and has proven its worth. The extremely resilient polyester fibre is woven finely as a cross mesh. This way a high density of fabric is achieved which not only makes our breaker more robust against foreign objects, but also makes it particularly puncture resistant. The BlackChili compound is the unassailable specialists for combining compound characteristics. Grip and rolling resistance are no longer adversaries. Outstanding handling characteristics from the first to the last kilometre.Neutral design and solid construction for sporting rides at the highest levelPuncture protection, comfort and decent grip make every ride hassle freeExcellent puncture protection thanks to PolyXBreaker puncture protectionExcellent grip, high mileage and efficient rolling thanks to BlackChili compoundMade in Germany
Don't let rain and mud slow you down. With the Cube Acid Mud Blocker for your rear wheel, full-gas trail riding knows no limits. An extra spray protection lip stops the dreaded skunk stripe on your back. Comes with 6 cable ties for the perfect hold and an optimised design with elongated sides for maximum stability. The included protection foils effectively keep frame scratches at bay.Protects against wheel sprayQuality plastic constructionFor 26", 27.5" and 29" tyresMaximum tyre width up to 2.6"Includes 6 cable tiesFrame protection foils to prevent scratching the seat staySpray protection lipOptimised adjustment for maximum stabilityWeight: Short 190g / Long 220gDimensions: Short (WxL) 95 x 528mm / Long (WxL) 95 x 605mm
High-speed descents can get really dirty in bad conditions. That's why Cube came up with the Acid Mud Shield. It keeps the spray off your face so you can focus on the important stuff: shredding to your heart's content. It bolts on quickly and easily and is just as uncomplicated to remove. The Mud Shield's extended wings with rubber pads protect your fork against scratches and fend off dirt. Compatible with Fox, Suntour, Öhlins and Marzocchi forks.Protects the face from front wheel sprayQuality plasticFor 26", 27.5" and 29" MTB forksMaximum tyre width up to 2.6"Includes bolts for Fox 32, 34, 36, 38, 40 (2021), 49, AWL, SR Suntour, Ohlins and Marzocchi forks with Fox chassisFork scratch protectionIntegrated fork spray protectionOptimised adjustment for maximum stabilityWeight: Short 105g / Long 124gDimensions: Short (WxL) 80 - 125 x 340mm / Long (WxL) 80 - 125 x 405mm
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
The FSA Orbit 1.5E ZS 1 1/8 Inch Threadless Headset is for tapered 50mm/63mm OD head tube and comes with an alloy top cover, forged alloy and CNC machined alloy cups.1.1/8", 36°×45° ACBFor tapered 50mm/62mm OD Head Tube1.1/8" steererAlloy top coverUpper: Forged alloy cup with ACB (blue seal)Lower: 1.5" CNC machined alloy cup with ACB (blue seal)Stack height: 16.9 + 2.9 = 19.8mmWeight: 129.6gSpares:Upper Bearing: TH873 (160-1648)Lower Bearing: TH073 (160-6761)Crown Race: 1.1/8 (H6089, 160-5540)
The Park Tool LRT-3 is designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks.Fits chainring of Specialized, Cannondale and FSAFor lockrings with 47 48mm outside diameter and 4 or 8 notchesFits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torqueConstructed of 4140 heat treated steel and plated for long life
The Park Tool LRT-4 is designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900 and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminium for a perfect fit and to prevent marring expensive parts.Machined flat face for optimal lockring engagementFor lockrings with 41mm outside diameter and 16 notches36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque6061 aluminium construction