Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed by pro riders, mechanics and scientists, Peaty's Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like proverbial to a blanket, yet leaves a minimal mess when removed. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit. Do you struggle to find the hole No problem! Just hold your rim up to the light and the tape's semi-transparent finish will illuminate the way. One 9 meter roll will cover approximately: 5 x 26" Rims, 4 x 27.5" Rims, 4 x 29" Rims or 4 x 700c Rims.
Introducing the Crank Brothers Mallet E Boa MTB Shoes. Designed to withstand the rigors of mountain biking from hitting your local trails to racing Enduro, these shoes have all the features to keep you in comfort all day.Outsole:Match Box optimised for any MTB pedalsRamp for easy clip-in / out and mud clearancePre-installed Match Shim for Crank Brothers pedalsPre-installed cleat for Crank Brothers pedalsMC1 mid-friction compound for easy exitDirectional angled & spaced toe / heel lugs for traction while hikingRamped toe for walkabilityStiff shank for power transferCushioned EVA midsole for shock absorptionUpper:BOA Fit System & strap for micro-adjustmentVentilated windows with perforated mesh material for breathabilityPadded tongue for protectionTPU reinforced areas for protection and abrasion resistanceHeel dots for grip and superior heel holdHidden eyelets for durability and clean designThe Mallet E has many great features to give you a premium quality mountain bike shoe. The Boa system and strap allows for a perfect fit and there s also a padded tongue which adds protection and comfort. There s also TPU specific reinforced areas which gives you protection against debris and abrasion resistance. For added grip in difficult conditions there s directional angled and spaced heel and toe lugs for extra traction. A cushioned EVA midsole for shock absorption and a stiff shank for excellent power transfer gives a great balance between comfort and pedalling efficiency.
Sometimes, the Mucky Nutz Face Fender doesn't quite offer enough protection from mud flying from your front wheel. Enter the Mucky Nutz MudGuard which is designed for bigger, closer coverage, while retaining the sleek look and easy fitting of the legendary Face Fender.Designed to offer better coverage with elongated, 3D shape and recessed bridge area for more tyre clearanceWide upper arm profile protects fork seals and stanchions from dirt & mudCompatible with most suspension forks and 26 , 27.5 & 29 wheel sizes and tyres up to 3 Incredibly easy to fit with supplied Velcro rol, just like the original Face FenderShort Mudguard is 400mm long, Long MudGuard is 600mm for additional coverageAs Mucky Nutz' first entry in the 3D fender market, they wanted to ensure they got it right. The MudGuard has been designed as a fully functional and sharp-looking piece of kit, that keep and mud and spray out of your face, even in the worst conditions. The MudGuard is compatible with most suspension forks, including Boost axle-spacing models and is suitable for 26 , 27.5 & 29 wheels and up to 3 tyres. Safe to say it has the ever-changing industry wheel/tyre size standards under control then! The Guard itself features a forward lip to minimise spray, along with a sharp trailing edge to cut cloggy soil away from your tyre. Despire this and the closer fit, the recessed bridge area means you'll still have plenty of tyre clearance. The wide upper arm profile is also designed to keep mud and dirt away from your fork seals and stanchions, keeping them cleaner and prolonging intervals between services. The MudGuard fits in seconds with the supplied Velcro roll, just like the original Face Fender. Another trait it shares with the Face Fender is the multitude of fastening slots, giving you a wide range of adjustment for different forks, as well as as the possibility of using it as a rear mudguard on some full suspension bikes. With the Short version weighing just 75g, the MudGuard is also super light. Offering excellent coverage and a versatile fitting system, the Mucky Nutz MudGuard is a worthy addition to their range for when you need maximum protection from mud & spray in the worst conditions.
The original Dry Lubricant, revolutionary when released it has become the standard for bike lubrication. Using Teflon to reduce friction and mechanical wear it effectively penetrates into hard to reach areas for complete protection, while its dry formula resists attracting dirt. Non-toxic and biodegradable, Finish Line Teflon Plus Dry Lubricant is suitable in all weathers for use on chains, derailleurs, shifter and brake pivots.The original dry lubricantDry formula resists dirt buildupEasy application, available in dropper bottles or aerosolsSuitable for use in all weathers
What is the difference between a Keo Classic 3 and a Keo Classic 3 Plus The material used for the contact area. The little extra, stainless steel rather than composite, optimises pedal stiffness and hence the transfer of power from you to your bike. As for the rest, we stick to what works: fast clip in / clip out and easy tension adjustment.Large, wide contact area for excellent stability thru the pedal strokeA total weight of 350 grams, all includedAll of LOOK's expertise at an affordable priceSpindleSpindle material: ChromolyBody & PlatformTechnology: SpringBody material: CompositePlatform material: Stainless steelPlatform area: 400 mm²Platform width: 60 mmRetention & CleatsRetention: 8 to 12Cleats: Keo GripWeight & AccessoriesWeight Pedal: 140 grWeight pair + cleats: 350gStack height + cleats: 17.8mm
The MET Yo-Yo is a high quality park-style BMX and urban helmet for younger riders. Hard ABS outer shell with EPS linerHand washable comfort padsPads available in two different thicknessesCertifications: CE; AS/NZSThe ABS polymer outer shell is designed with one-piece thermoplastic construction, making the Yo-Yo amazingly tough and durable. The helmet comes equipped with compression padding in two different thicknesses (for small and medium sizes) for added comfort and protection. It s a rad design that looks good, feels good and above all else, keeps heads safe.Size Chart:
The MET AllRoad is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Outer shell construction: In-MouldInner shell: Shock absorbing polystyreneStraps and Divider: Adjustable cam dividerComfort: Hand washable comfort padsFit system: Safe-T DUO vertical adjustment and ponytail compatibleVisor: Snap in/out visorVentilation: Internal air-channellingReflective rear stickerCompatibility: MET Dualgel front padCompatible with the new MET Magnetic USB LED LightThe AllRoad is sporty on one side and comfy on the other. It s exceptionally lightweight and secure thanks to MET s distinguishing and clever design. It s got hand washable comfort pads so that you can keep the helmet clean and fresh, a Safe-T DUO vertical adjustment that s compatible with ponytails and a simple snap in and out visor. Great ventilation is provided through internal air channelling and reflective rear stickers up your low light visibility.Size Chart:
The MET AllRoad is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Outer shell construction: In-MouldInner shell: Shock absorbing polystyreneStraps and Divider: Adjustable cam dividerComfort: Hand washable comfort padsFit system: Safe-T DUO vertical adjustment and ponytail compatibleVisor: Snap in/out visorVentilation: Internal air-channellingReflective rear stickerCompatibility: MET Dualgel front padCompatible with the new MET Magnetic USB LED LightThe AllRoad is sporty on one side and comfy on the other. It s exceptionally lightweight and secure thanks to MET s distinguishing and clever design. It s got hand washable comfort pads so that you can keep the helmet clean and fresh, a Safe-T DUO vertical adjustment that s compatible with ponytails and a simple snap in and out visor. Great ventilation is provided through internal air channelling and reflective rear stickers up your low light visibility.Size Chart:
The MET AllRoad is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Outer shell construction: In-MouldInner shell: Shock absorbing polystyreneStraps and Divider: Adjustable cam dividerComfort: Hand washable comfort padsFit system: Safe-T DUO vertical adjustment and ponytail compatibleVisor: Snap in/out visorVentilation: Internal air-channellingReflective rear stickerCompatibility: MET Dualgel front padCompatible with the new MET Magnetic USB LED LightThe AllRoad is sporty on one side and comfy on the other. It s exceptionally lightweight and secure thanks to MET s distinguishing and clever design. It s got hand washable comfort pads so that you can keep the helmet clean and fresh, a Safe-T DUO vertical adjustment that s compatible with ponytails and a simple snap in and out visor. Great ventilation is provided through internal air channelling and reflective rear stickers up your low light visibility.Size Chart:
The Terranova MIPS Helmet from MET is the perfect choice for aggressive all-mountain and trail riding with its increased head coverage in comparison to a standard mountain bike helmet. Outer shell construction: In-MouldInner shell: Shock absorbing polystyreneStraps and Divider: Adjustable cam dividerComfort: Hand washable comfort padsFit system: Safe-T DUOVisor: Adjustable visor in flexible materialVentilation: 17 Vents, internal air-channellingSafety: Extended head coverage, flexible visorBe seen: Reflective rear stickerCompatibility: Goggle compatible, eyewear ports, vertical adjustment and ponytail compatible, MET Dualgel front padMET have worked closely with MIPS to achieve highly efficient ventilation and at the same time enhance the helmet s safety features. Featuring the MIPS-C2 brain protection system, the Terranova is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion. The Terranova comes with internal air channelling and 17 vents to provide a refreshing flow of air and to help keep you from overheating. To increase your low light visibility there s a reflective rear sticker and the comfort pads are hand washable too.Size Chart:
CushCore tubeless air valves are specially designed to work with a CushCore insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve.High-quality 6061 T6 Aluminium tubeless valvesDrilled base to improve sealant flow around insertTapered nitrile rubber sealUnique cross drilled base for air flow around insertsRemovable valve core for faster flow of air and sealantValve core tool includedWeight: 0.2 lbsLengths: 44mm or 55mmThe valve body is CNC machined from 6061 T-6 aluminium, anodized black, with a tapered rubber collar permanently bonded at the sealing interface. The valve core can be removed to add tyre sealant. A locknut with O-ring seal and valve cap are included.
The Minion DHF is a legend of the Maxxis range. Fitted front or rear, the Minion DHF is a corner lover s dream, giving you the confidence to hug the inside line in true Sam Hill style. Designed a solid all-rounder that excels in loose conditions, the slightly ramped centre tread keeps rolling resistance reasonable while the aggressive side knobs keep you hooked up no matter how low you go! Available in a huge range of sizes and compounds, the Minion DHF is a superb choice for your Enduro or Downhill bike.Excellent braking and cornering tractionAggressive cornering knobsDirectional, ramped centre tread Weight from 700gPlease note: All tyres with a width of 2.5 or 2.6 are the WT (Wide Trail) versions..
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
The Hope Carbon Handlebar has finally arrived! 100% designed, tested and manufactured in Barnoldswick UK for unbeatable riding performance.Full Carbon ConstructionWidth: 780mmRise: 20mmUpsweep: 5 degBacksweep: 7 degDiameter: 31.8mmRecommended Use: Trail / All MountainWeight: 225g
The Look Keo Classic 3 is the perfect entry point into road bike clipless pedals. With adjustable entry/release tension, the Keo Classic 3 is easy to use and beginner-friendly. The Keo Classic 3 is also built to last; just like Look s other pedals these are made to go the distance.Adjustable entry/release tension is perfect for beginnersLarge, wide contact surface provides excellent pedalling stability and efficiencyOversized steel axle and needle cartridge bearing for excellent longevityLightweight at just 140g per pedalSold as a pair with grey 4.5-degree release Keo Grip Cleats & ScrewsThe Keo Classic 3 is easy to use, has a large and wide contact surface to provide excellent pedalling stability and had an adjustable entry / release tension for an easy clip out. The spindle is constructed of an oversized steel axle with miniature ball bearings and a needle bearing cartridge for improved wear resistance and exceptional durability.To say that Look extensively test their products would be a serious understatement. Look axles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal with an eccentric rotation, which is equivalent to a Mark Cavendish sprint at 1700 watts with 100 revolutions/min for 333 hours! The Classic 3 Pedals are perfect for those that want great quality, high performance pedals on a budget.
Complete your Pro cockpit with these 3K carbon fibre spacers. The spacers are supplied as a set of 4 pieces including 1 x 3mm, 1 x 5mm, 1 x 10mm and 1 x 20mm. For use with 1-1/8 inch steerers.
The District+ is one seriously powerful back light! With a maximum of 135 Lumens from 6 different modes (3 static, 3 flashing) the 2 cell Li-Ion battery gives between 15-200 hours of burntime. The light can also be used with a battery from an existing front light using a splitter cable, cutting down on weight and additional clutter. The QR band seatpost mount makes it easy to fit or remove in a hurry, while the 270 degree visibility ensures you are seen.Powerful 135 Lumen rear light6 modes - 3 static, 3 flashingSupplied with 2 cell es li-ion battery or uses power from front light using splitter cable2600mah 2 cell es battery with integrated battery life indicator3 red osrams high efficiency oslon leds270 degree visibilityQr band seatpost mount (aero post mount available separately)Burntime 15-200 hours