The new Ergon road saddle for men. Due to their specific pelvic anatomy men are sitting more upright on the saddle. This creates a higher pressure in the highly sensitive perineal area, which often leads to any of the varying forms of discomfort. This is where the relief concept of the SR Men saddle comes into play. Through the falling relief channel with cut-out, the resulting pressure is evenly distributed onto the bone structures (sit bone and parts of the pubic blades). The Y-shape helps keep the freedom of movement high even when riding in the low position typical for road biking.Relief Inlays: More comfort thanks to the OrthoCell®-Inlays in the seating area, which help distributes pressure better.Large-Area Pressure Distribution: Optimal pressure distribution in the area of the sit and pubic bones by means of a flat, even contact area and top-quality padding foams.Effective Relief: The extreme deep and rearward increasing relief channel is complemented by a proper cut-out in the deepest spot. This construction combines all benefits of a standard cut-out saddle without its drawbacks (often a very stiff shell) producing a particularly high degree of strain relief of the sensitive perineal area. Exceedingly high pressures often are the cause for discomfort and numbness in the genital area.Shape: Through its Y-Shape the freedom of movement and legroom are maximized, while at the same time all bone structures are well supported.Ramp: The ramp particularly supports the bottom in the strongly forward tilted riding position, allowing for improved pressure relief in the genital area.Flat contour: Due to the more upright pelvis orientation the saddle surface is flat with great freedom of movement.Integrated Mount: Convenient removable mount for accessories like Topeak® saddlebags.Key Features:Shell: Nylon Composite,Rails: TiNox,Cover: Microfibre,Padding: Orthopaedic Comfort Foam with OrthoCell Pads,Weight: 260g (S/M), 270g (M/L),.Size:Small/Medium: 9-12cm Sit bone width,Medium/Large: 12-16cm Sit bone width.
The new SMC offers even more seating comfort than the best-selling SMC4 and is a true problem solver. The new SMC will replace the world proven SMC4 for both Women and Men. MTB and gender optimized contact areas for the sit bones, combined with freedom of movement, make this a saddle ready to take on the world.Key Features: Shell: Nylon Composite, Rails: CroMo, Cover: Microfibre, Padding: Orthopaedic Comfort Foam with Gel Pads, Weight: 300g (S/M), 335g (M/L).
The uncompromising saddle for modern downhill racing. Born from years of experience on the Downhill World Cup and through feedback from the fastest World Cup athletes. New, super-compact shape - maximum tyre clearance even with small 29er frames. Adapted anti-slip elements on the surface (Comp & Pro Titanium). 360° padding for maximum protection and optimized leg steering control. Well-padded seat for lift use. Contour follows the motion sequence required of downhill – for a smooth descent.Saddle Shell: Nylon Composite,Rail: CroMo Oil Slick Colourway,Cover: Microfiber with Anti-Slip-Cover,Padding: 360° Edge Padding,Size (LxB): 236 x 120 mm.
Developed in conjunction with Fab Barel, Richie Rude, Cody Kelly, Joe Barnes, Remy Metailler to name but a few. The narrow and short V-Shape, seating surface ensures optimum, freedom of movement and easy, position shifting. The saddle enhances steering input and control to the bike through the inside of your thighs, hence the contact zones being padded all-around.Key Features: Shell: Nylon Composite, Rails: CroMo , Cover: Microfibre, Side Flanks: Yes, Edge Protection: Yes , Padding: Orthopaedic AirCell Foam, Weight: 245g (S/M), 250g (M/L).
Ultra-lightweight aluminium construction and an aero contoured top profile. Giant Contact SL Aero Drop Bar (Propel Disc only) is for when you want every aero advantage available. Stiff, light and fine tuned to reduce vibration. These handlebars are dedicated to the Giant Propel Disc series and requires Contact SL or Contact SLR aero stem for compatibility - if you are unsure, please speak to your local Giant retailer. Features: Material: Ultra-Light aluminium, Clamp Area: Specific to Propel Disc , Extra: Aero contoured profile, Width 400mm, 420mm and 440mm, Drop (measured centre to centre), 400mm bars = 130mm drop, 420mm bars = 135mm drop , 440mm bars = 140mm drop, Reach (measured centre to centre), 400mm bars = 73mm reach, 420mm bars = 78mm reach, 440mm bars = 83mm reach, .
When it comes to shredding the trail, the quality of your protection can often define the way you ride. Bringing everything you need and more to the table, Leatt’s Elbow Guard 3DF 5.0 are incredibly durable and oh so cosy for days spent on the beaten path. Highly breathable, they wick away moisture immediately and the lightweight design ensures speed isn’t compromised when lining up the mother of all kickers. Unrivalled SafetyKicking up roost has never been easier. Letting you ride aggressively with a new-found confidence, the Elbow Guard 3DF 5.0 pads are comfier than your average CE rated elbow guards and their low profile ensure that they can be worn over or under your favourite riding jersey. Staying firmly positioned thanks to a silicone lamination, they are abrasion resistant with aramid fibre on the outer and a 3D design ensures comfort well beyond their price point. Key Features: MoistureCool wicking fabric,More comfortable and lighter than most CE rated elbow guards,Low profile shape allows guards to be worn under or over your riding jersey,Silicone lamination to keep protector in place,Abrasion resistant aramid fibre outer layer,Great fit and very comfortable by 3D design,Safety Standards: Impact: CE EN 1621-1 Level 1,Weight: 250 grams (9 ounces) per pair.
Ride anywhere with the wide-range PG-1230, 11 to 50-tooth Eagle™ cassette. The NX cassette gives riders every bit of the climbing range that the Eagle™ ecosystem affords with a simple upgrade to splined-drive body wheels. The PG-1230 is the only Eagle™ cassette designed to be durable enough to withstand the increased demands of E-MTB applications and a perfect solution to heavy-duty use and abuse.Things To Remember:Eagle™ technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents.,Eagle™ is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle™ drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact.,The PG-1230 is the only Eagle™ cassette that meets our durability requirements for E-MTB applications.Key Features:,Compatible with a splined driver body.,This PG-1230 cassette is an integral part of the SRAM Eagle™ drivetrain Ecosystem.,Wide 11-50t gear range—a perfect fit for any ride. Optimized gear steps across entire range.Specifications:Speed (CS): 12sGearing: 11-50tCog finish (Cassette): BlackTechnology (Cassette): PGCog sizes: 11-50t:11,13,15,17,19,22,25,28,32,36,42,50,
The Wolf Tooth Ultralight Hex and Bottom Bracket Wrench Kit is lightweight, durable and primed for travelling with your bike.An external BB cup spline at one end is ideal for centerlock rotors as well as bottom brackets. The 1" hex end pairs seamlessly with Wolf Tooth's steel hex insert tools which are included in this kit. The tool also has a nifty chainline measurement ruler.Every wrench and steel insert tool is machined and nickel plated at Wolf Tooth's Minnesota HQ. The following inserts are included in this kit:Ultralight Cinch and ISIS Spline Wrench Insert- older ISIS bottom brackets or the Race Face Cinch direct mount chainring system,Ultralight Cassette Lock Ring Wrench Insert- cassette lockrings and some centerlock rotor lockrings,Ultralight 8mm Hex Wrench Insert- pedal removal and other 8mm hex applications,Ultralight 16mm Hex Wrench Insert- Race Face Cinch aluminium spindle bolts, frame pivots, and other 16mm hex applications.Key Features:Machined from 7075-T6 aluminium in Minneapolis, USA.,Includes the wrench and steel inserts.,1-inch hex drive interface compatible – inset magnets enable quick coupling and decoupling of steel inserts.,16-notch 44 mm bottom bracket tool (or centerlock rotor tool) compatible.,Weight - 88g.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
A versatile digital scale built to accurately weigh bikes, frames, and componentsFeatures a unique hexagonal design enabling the scales to be clamped solidly into a repair standAlternatively the scales can be hung from a ceiling hook or branchMeasures in both pounds and kilograms to the tenth and includes a dual position, silicone coated hanging hookRequires three AAA batteries which are not includedMaximum weight limit 25 kg (55 pounds)
PH-T1.2 P-Handled Torx® Compatible Driver Set with Holder-Shaped Wrench Set.Set Includes:T6,T8,T10,T15,T20,T25,T30,T40.
Tool specialist Wera presents Bicycle Set 3, a compact but comprehensive 39-piece screwdriver & socket toolset for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for Road, MTB and E-Bikes.Wera’s iconic ergonomic Kraftform bit hand holder for fatigue-free workingThe Zyklop Mini 1 bit ratchet slim design and fine-tooth mechanism of the ratchet, with its small return angle of only 6 degreesThey feature a ball stop groove and knurling at the rear end for manageability during manual useFeature Wera’s Take it Easy Tool Finder colour coding, for easy and fast location of the tool you need for the jobAll Wera tools are covered by a lifetime guaranteeThe set includes Wera’s iconic ergonomic Kraftform bit hand holder for fatigue-free working. Plus, the Rapidaptor quick-release chuck, for fast bit change without the need for additional tools. The tough-absorbing bits prevent any premature breakage of the drive tip.The Zyklop Mini 1 bit ratchet slim design and fine-tooth mechanism of the ratchet, with its small return angle of only 6 degrees, makes it ideal for reaching confined spaces on your bike. The Zyklop sockets are suitable for manual and machine-operated tools (non-impact). They feature a ball stop groove and knurling at the rear end for manageability during manual use.These tools feature Wera’s Take it Easy Tool Finder colour coding, for easy and fast location of the tool you need for the job. Additionally these tools feature Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle.Set Includes:1 x Kraftform bit hand holder with Rapidaptor quick release chuck,1 x Zyklop Ratchet,1 x K Rapidaptor Universal bit holder,1 x Nut spinner socket adaptor,7 x HMA Zyklop 1/4" Socket (5.5mm, 6mm, 7mm, 8mm, 10mm, 13mm, 15mm),3 x TZ Philips Head Bits (PH 1, PH 2, PH 3),7 x TZ TORX Bits (TX10, TX15, TX20, TX25, TX27, TX30, TX40),3 x TZ Flat Head Screwdriver Bits (4mm, 4.5mm, 5.5mm),7 x Hex-Plus 89mm long Bits (2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm),5 x Hexagon Ball Head Bit (2.5mm, 3mm, 4mm, 5mm, 6mm),2 x Tyre Lever,1 x Robust & lightweight fabric pouch.Technical Specification:Size: 210mm x 110mm x 65mm,Set Weight: 678g.
The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. Features an innovative top plate which can be adjusted on a convex track, to keep it level to the ground, independent of fork angle. Integrated QuickTrack™ system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with RackTime® Snapit system bags.
The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or rigid bikes without rack eyelets. Features an innovative top plate which can be adjusted on a convex track, to keep it level to the ground, independent of seat stay angle. Integrated QuickTrack™ system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with RackTime® Snapit system bags.*TetraRack is not recommended for carbon forks and seat stays
A robust, entry level 700C wheel suitable for touring or commutingDeore rear or front hub features Labyrinth and Contact seals to prevent ingress of corrosion-causing dirt and water,Mavic A319 box-section rim features machined braking surfaces and black anodising,36 Plain Gauge DT Swiss stainless steel spokes,Laced in a traditional 3-cross pattern for a proven balance of forgiveness, stiffness and strength.
Features:A reliable, good value replacement road wheel,Durable smooth rolling Shimano Tiagra 100mm quick release front hub,Mavic's CXP Elite rim offers durability and an aerodynamic profile whilst featuring single eyelets and a machined braking surface 622 x 15,32 plain gauge DT Swiss stainless steel spokes black,Laced in a traditional 3 cross pattern for a proven balance of forgiveness, stiffness and strength,
The BTA HSF800 system has a bottle that has been designed to hide the cage from the wind. We worked to minimise frontal area wherever possible to avoid adding aero drag to your setup.The system features a Garmin mount on the cage above the bottle for easy viewing,The revised and new mounting bracket offers greater compatibility than previous models,Redesigned cage has a high retention design,Bottle unscrews at the middle to make for easy cleaning,Easy to open secure fill port lid to avoid any sports drink splashing over bike or rider,800ml capacity.Please watch the cleaning and assembly video before purchasing
FEATURESNew fully recyclable plastic packaging,9 Speed,Silver,Reuseable.
The Dimension saddle is at the cutting edge of Prologo's vision. It's the result of intricate and careful analysis of every little detail, to make this the most advanced and anatomically comfortable saddle that has ever been made.The Dimension name alone exemplifies just how important this project is, Prologo's task for this saddle was to create an innovative product in terms of design, size, comfort and performance. Thus, Comfort, performance, lightness and prevention of perineal area problems are its strengths. The Dimension has also been designed to be a truly unisex saddle, providing pressure relieving benefits to both female and male riders.The design and size are engineered specifically for comfort when on the drops and for aggressive riding. It's not just comfort that this saddle has to offer though. Top-end performance and lightweight components mean this saddle is just about ready for anything. At only 204g it's a lightweight and ergonomic saddle for high-end users. The increased 143mm width, helps to distribute the weight of athletes over a larger surface, ensuring greater comfort over a longer period of time, and a short nose (3-3.5cm shorter than a traditional saddle) to eliminate any sort of contact and pressure in the front area, especially when on the drops.The wide anatomical PAS channel runs through the saddle along its central axis, reducing the contact and compression of soft tissues and tendons.The PAS system, is a channel in the base of the saddle. The hole or channel helps to maximises blood flow and supports the pelvic area while also preventing pressure peaks. This is a system researched, designed and developed to eliminate pressure and numbness to areas that need it most. The PAS Technology is achieved by a particular anatomical design of the foam and base. The performance and durability are guaranteed thanks to the unchanged integrity of the base.The Dimension T4 saddle uses T4.0 rail, a Chromo-Molibdeno rail with a very high tensile strength. It has 7mm rail clamp diameter. Key Features: Size: 245 x 143mm,Rail: T4.0 Steel,Cover: Microfibre,Padding: Light Foam,Weight: 204g.