Key Features: A new dimension of comfort, Upper: , Reflective pullers,Microfiber wrist puller,Reflective closure strap, . Palm:, One-piece, seamless design,Molded palm with Multidirectional Curvature by Elastic Interface, . Padding:, Multi-density hybrid cell system foam, ..
Key Features: A new dimension of comfort,Upper:, Reflective pullers,Microfiber wrist puller,Reflective closure strap, .Palm:, One-piece, seamless design,Molded palm with Multidirectional Curvature by Elastic Interface, .Padding:, Multi-density hybrid cell system foam, ..
The Kappa Space T2.0 expands on the comfort and practicality of the Kappa Evo range by maximising the anatomical design and comfort. It features a wider central tunnel which eliminates pressure spikes and numbness. This increases overall blood flow where it's most needed. It has the same 147mm wide seating platform as the Kappa Evo but utilises every bit of space by using variable foam densities to increase comfort.The nose of the saddle is designed with a 45deg angle to the saddle to help maximise comfort when pushing in the most aerodynamic positions. The Prologo Space technology has a lot of benefits to it. It provides the maximum ergonomic design, by using a wider central tunnel than what is normally found in standard PAS saddles, which eliminates pressure spikes and numbness. The Space saddle width has an increased range from 141/143mm to 147mm making it much more comfortable when on the bike.The Kappa Space saddle also uses Prologo's ESD technology. Ergonomic Shape Design is where Prologo have identified a new ergonomic design for the centre of the saddle, which allows more space for your legs and an overall better cycling position. Further to this, the ESD reduces the friction of the quadriceps against the body of the saddle.The saddle also has Active Density Technology which combines 3 foam densities with a variable stiffness base. It's structured in different areas using 3 related foam densities.High Density - This is on the rear of the saddle and it gives a stable support of the ischial bones.Medium Density - This is in the middle of the saddle and it reduces the pressure on the pelvic area.Low Density - This is at the front of the saddle and it reduces pressure peaks in the body.The saddle uses the T2.0 rail, which is a Chromium-Molybdenum rail with an extremely high level of tensile strength. It has a 7mm rail clamp diameter. Key Features: Size: 273 x 147mm,Rail: Chromoly T2.0 7mm,Cover: Microfibre,Padding: Light PU,Weight: 258g.
The Akero is a flat saddle ideal for medium to short Mountain Bike rides. It's a versatile saddle and it's easy to find your individual seating position even on the most technical of trails.The flat shape is most suited for cyclists with good lumber flexibility and allows easy movement of seating position, making it ideal for experienced riders that like to change position to really put the power down.The wide anatomical PAS channel runs through the saddle along its central axis, reducing the contact and compression of soft tissues and tendons. The PAS system, is a channel in the base of the saddle. The hole or channel helps to maximises blood flow and supports the pelvic area while also preventing pressure peaks. This is a system researched, designed and developed to eliminate pressure and numbness to areas that need it most. The PAS Technology is achieved by a particular anatomical design of the foam and base. The performance and durability are guaranteed thanks to the unchanged integrity of the base.T-shape: More freedom of movements and positioning on the saddle thanks to a standard length. Designed to guarantee the highest level of comfort in the area where thighs rub the saddle, more freedom of movements and positioning.Active Base: The technology assures a saddle that is stable, safe, and secure in all-terrain conditions, by adapting to the rider’s movements. It also offers the benefits of an open shell but with a protecting cover.Base Material, long carbon fiber: This material, in combination with the T2.0 rail and the active foams, ensures excellent elasticity and vibration absorption for absolute comfort. Key Features: Size: 250 x 150mm,Rail: T2.0 Steel 7mm,Cover: Microfibre,Padding: Light Foam,Weight: 225g.
Deda created the new Classic headset series to fit solutions in titanium, steel and alloy modern bicycle frames. The Classic 1 model is designed to fit 44mm internal diameter headtube with an external lower cup for 1.5” tapered steerer fork combined with a 1-1/8’’semi-integrated upper. The headset comes with a luxury pob finish to match any frame colour.Material: Alloy cups, chrome steel bearings,Finish: Polish on black logos,Weight: 91g.
The MET Allroad Mips is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Sporty on one side, comfy on the other. It's exceptionally lightweight and secure thanks to MET's distinguishing design.Key Features:In-mould polycarbonate shell with EPS liner,MIPS C2 rotational management system engineered to add protection in case of certain impacts,Extended Head Coverage for deeper head protection,Exceptionally comfortable and secure on the head thanks to refined internal shape,MIPS-C2 rotational management system to increase protection against certain impacts,MET Safe-T Orbital Fit System,360? head belt to avoid pressure points on the head,Straps with adjustable divider to maximise aerodynamic and comfort,16 Vents, Internal engineered air channeling system to improve ventilation and comfort,Hand washable comfort pads,Reflective rear decals to enhance visibility in low-light conditions,Sunglasses ports to securely dock sunglasses when climbing or resting.
Developed specifically for the demands of 11-speed e-bike systems.Key Features:Designed for high-torque loads,Strong stainless steel inner links,Corrosion resistant for maximum service life ,136 links,311g.
When Prologo decided to enter the E-Bike market, the specifics of the saddle were not just passing thoughts. They launched a design challenge at the Politecnico University of Milan - The biggest design college in Italy. This 360deg project started by an in-depth market analysis to get to know the sector, the target and the competition. All that information and data was spun together to create the best product that Prologo can offer the E-Bike market - The Proxim saddle.Proxim W400 is the newest member of the Proxim family. It is ideal for both e-bikes and standard bikes, for off-road use but also for commuting / leisure thanks to its size and padding levels (Multi Sector System).Proxim W400 is available in 2 widths: 155mm (for a more sportive use) and 165mm (for a more trekking, leisure and commuting use); thanks to its short length (255mm) the contact points and pressure peaks in the perineal area are reduced. Key Features: Optimized Nose: wider and inclined downwards,Active base system: a hollowed shell that lets take advantage of all the benefit of a Perineal Channel, more blood flow and air cooling, offering at the same protection against water and mud during critical weather conditions,MSS Multi Sector System, designed in co-operation with the Polytechnic of Milan, it helps to improve comfort and performance; the active foam pads, separated from each other, create independent zones that work in a smart and individual way, favouring the natural movement of the pedaling phases both of pushing and pulling, absorbing the vibrations that the base transfers to the saddle. The Round Shape of the M5 allows the pelvis a natural rotation, creating stability and support for the lumbar areas, and the distribution of the pressures on a greater surface,New Forms: the new softer and padded foams used on the W400 guarantee a high level of comfort allowing the cyclist to spend long rides sitting in the saddle (1cm thickness for the 153 version; 1.7cm thickness for the 163mm),Rear handle and reflective graphics: The saddle is equipped with a rear "handle" to facilitate the movement of the bicycle as well as reflective graphics to improve safety.
The Kappa Evo T2.0 is 360 riding option saddle with a semi-round shape and comfortable sitting characteristics. It provides a 147mm wide seating area and relieving lightweight foam padding.The PAS system is a channel in the base of the saddle. The hole or channel helps to maximises blood flow and supports the pelvic area while also preventing pressure peaks. This system is designed and developed to eliminate pressure and numbness to areas that need it most.The KAPPA EVO saddles are available with the T2.0 rail. It uses a Chromo-Molibdeno rail with a very high tensile strenght. It has 7mm rail clamp diameter. Key Features: Size: 265 x 147mm,Rail: T2.0 steel 7mm,Cover: Microfibre,Padding: Light PU,Weight: 270g.
Strong, rigid and superlight.13 butted, heat treated Cr-Mo bars for out and out racing.,16mm diameter brace. ,X-knurled centre,.SpecificationsMaterial: Cr-Mo,Width: 730mm width with easy cut-down marking,Rise: 8,Backsweep: 7 or 11 degree backsweep,Steerer clamp size: 22.2mm,Colour: Gloss Black, Electric Blue, Racing Red, or Black-Chrome.
For the DJ connoisseur who would rather have the lateral wheel strength that wider spaced spoke flange set up can give, than have a disc mount.Sleek, weight saving purist design. With the wider flanges and no brake torque to worry about, you can run fewer spokes and save even more weight.20 x 110mm T-axle compatible with optional end cap and axle systems to allow regular QR, 15mm T-axle, 3/8 inch or 14mm nutted axle.(To change to nutted axles you will also need a Halo Spin Doctor QR Front Axle Kit HUHASDAQ as well as the appropriate Axe Men nutted stub axles.)
Halo SPIN DOCTOR MTB Rear;All purpose MTB sealed bearing rear cassette Disc hub.Light enough for Cross Country, rigid enough for Freeride, buff enough for DH.The Spin Doctor rear disc hub uses a bolt-on ball bearing cassette body with an integrated 3 pawl positive engagement drive. This places the 2 main hub sealed bearings on the outside of the hub (beyond the cassette body), providing superior axle support.The "outboard bearing" construction reduces axle flex and thus reduces bearing wear.When bolted together, the cassette and hub body become a strong, integrated unit, with 2 sealed cartridge main hub bearings and integrated Freehub looseball bearings.Sweeping shell styling and minimalist type International Disc mounts provide a beautiful looking, strong, light, rear MTB hub.Features;6061 Alloy CNC machined shell.,Shimano HG compatible cassette body.,International 6 bolt Disc Mounts.,Precision CNC Cr-Mo QR axle system.,Lightweight knurled alloy non-slip drop-out faces.,Bolt-On ball bearing integrated cassette body system.,Durable "Outboard" sealed cartridge bearings..Optional Extras;Saint type rear mech compatible axle option.,10mm Solid (nutted type BMX) axle kit option.,14mm Axle convertor kit to fit with 10mm Solid axle (converts to 10-14mm)..Compatibility;a) Quick Release 135mm. (included as standard - excludes QR skewers),b) Saint 135mm gear mech. (use optional extra Halo Saint axle kit),c) M10 x 135mm nutted (use optional extra Halo 10mm axle kit.),d) M14 x 135mm nutted (use optional Halo 10mm axle kit + 14mm axemen convertors).Note: Spin Doctor rear hubs cannot be used on any 12mm T-axle systems.SpecificationsMaterial 6061 Alloy,Drillings 32h, 36h or 48h,Bearings 6200 cartridge bearings,Spacing 135mm,Disc Mount 6 bolt,Dimensions C-L 34mm, C-R 19mm, flange 58mm,Model Ref S-DOC2,Colour Black,Weight 473g.
Halo announces perhaps the finest track hubs out there. custom machined with the distinctive Halo sweeping centre curved shape.Japanese sealed bearings.Hollow axle with Ti colour finish.C clip on both side of each sealed bearing.Hi-polish custom CNC machined hub shell, Alloy flush fit bearing cover and end cap.120mm spacing.Laser logo.32H, 36H or 48HDouble fixed or fixed/free options.C-L 31mm / C-R 31mmDiameter 62mm.Note: General Fixed cog check: for correct fixed use, the fixed cog should Never move on the hub when pedal force is applied in both directions. i.e. if the cog moves, then something is wrong. Continued use with a fixed cog that moves will result in damage to the hub.Important Note : Threads for "Fixed Cog Lockrings": Our hubs must only be used with ISO standard 1.29" x24TPi L/H fixed cog lockrings. Do Not Use French (1.32" x 24TPi) or Italian (33 x 1mm) standard lockrings. The larger diameter French and Italian lockrings may appear to work. but. will strip the threads from the ISO hub.
Rear HubKey Features:Internal O-rings and grease sleeve,High quality Cup & Cone Bearing,High durability, smooth rolling for sustained performance,Color options: Silky Black, Spark Silver.
Key Features:Genuine DT Swiss replacement Freehub body,Fits 3-Pawl system hubs as found on DT complete wheels and 370 hubs, for freehubs to fit 240, 350 or higher end complete wheels please see the ratchet freehub range,Does not include end cap; if you require an end cap please order the equivalent conversion kit.
Spare lens for the Aspire. Aspire lenses are developed to provide enhanced contrast across all environments.Fits both the original Aspire and the 2019 updated style.The Clarity road lens technology filters specific peaks in the color spectrum to enhance precision vision. Spare Lenses: Clarity MTB Brown/Light Silver Mirror CAT 2 VLT 40%,Clarity MTB Brown/Silver Mirror CAT 2 VLT 20%,Clarity MTB Brown CAT 1 VLT 27%,Clarity Road Violet CAT 2 VLT 23%,Clarity Road Violet/Gold Mirror CAT 2 VLT 26%,Clarity Road Violet/Light Silver Mirror CAT 2 VLT 25%,Clarity Road Violet/Silver Mirror CAT 3 VLT 13%,Regular Performance Clear CAT 0 VLT 90%.
Spare/replacement lens for the the Aim sunglasses.With the spare lenses for the Aim sunglasses, it’s possible to change lenses for a lighter or darker tint, so you can use your sunglasses in a wider range of conditions.The Clarity road lens technology filters specific peaks in the color spectrum to enhance precision vision. Spare Lenses: Clarity MTB Brown / Light Silver Mirror CAT 2 VLT 34%,Clarity MTB Brown/Silver Mirror CAT 2 VLT 17%,Clarity MTB Brown CAT 1 VLT 46%,Clarity Road Violet CAT 2 VLT 27%,Clarity Road Violet/Gold mirror CAT 2 VLT 26%,Clarity Road Violet/Light Silver Mirror CAT 2 VLT 20%,Clarity Road Violet/Silver Mirror CAT 3 VLT 10%,Regular Performance Clear CAT 0 VLT 90%.
FrontLoader is ideal for light and bulky items like sleeping bags, camping gear and spare clothing. Constructed of lightweight, highly water resistant and durable materials, it’s easily installed and removed with the tool free quick release mounts.Key Features:Lightweight, polyethylene/nylon construction,Water resistant bag with roll-side closures keeps cargo dry,External straps hold additional gear for convenient access,Air release system ensure bag remains compact,Quick release tool free mounting system,50x15x15cm,8L capacity,273g.
Style and practicality combine in the Basil Noir Double Bag. In timeless black with a stunning snakeskin print, this bag offers a generous capacity of 38 litres with plenty of space for all your odds and ends. Ideal for shopping trips or days out on your bicycle, this double bag is guaranteed to become a firm favourite. This bag fits all luggage rack types, including e-bikes, and can be combined with fastening systems including Rack Time, Carry More and i-Rack. Made from a water-resistant fabric, even getting caught in a shower needn’t be a concern, with the reliable fabrics serving to keep your precious contents drier for longer.Reflective finishes give you enhanced visibility in the dark, while the option to add LED lighting means you can make this bag an even safer choice should you wish. Each hemisphere of the bag connects via a discreet cord, while rip-tape fastening provides quick access to the interior. Looking for more exciting items? Browse the complete range of Basil Noir accessories today for more ideas.Key Features:Water-resistant fabric keeps your contents dry..Fits all luggage carrier types, including e-bikes..Reflective details and trims provide enhanced visibility in the dark..Specifications:Dimensions: 39cm x 15cm x 32cm.Model: Rear bicycle bag.Double or single bag: Double.Suitable for: Electric bike, citybike, city-trekking bike.Activity: Groceries, go out, recreational, commuting.Material: Polyester.System: Basil Universal Bridge System.Also suitable for: Shoulderbag.Usage: Luggage carrier rack.Additional compartment for: Laptop.Closure main compartment: Velcro strap.Laptop compartment: No.Side pocket(s): No.Front pocket(s): No.Anti-theft: No.Waterproof: Waterproof.Fasteners compatible: Yes.Removable: Yes.Handle: Yes.Carrying capacity: 10 kg total, with a maximum of 5 kg per bag.
This specially designed Hamax Bike Trailer Storage Cover will protect your child carrier when not in use. The heavy-duty material is water-resistant and ideal for protecting your Outback during transportation or while in storage.Never again worry about your car getting dirty on the way home from your trip. Simply store your Outback inside the cover to protect your seats or trunk. The zippers on the Hamax Bike Trailer Storage Cover open fully so you can pack and unpack your Outback with ease. Four carrying handles on the outside of the Outback Storage Cover make carrying a stored Outback a breeze.Preserve and protect your Hamax bike trailer,Ideal for storing your Hamax bike trailer when not in use,Keeps out dust and grim when stored in a garage, closet or attic,Zipper opens fully for hassle-free use.