Kask Caipi MTB Cycling Helmet (WG11)Highly protective, thanks to its technical construction, lightweight, at just 250g, and well ventilated, with a total of 22 vents, the Kask Caipi MTB Cycling Helmet (WG11) is ready to roll with you on any mountain bike escapade. Trail-Ready ProtectionAs you drop into technical trails, rip around big berms and revel in the thrill of taking on challenging terrain, the Caipi MTB Cycling Helmet will give you confidence that should you take a tumble, your head is well protected. In order to protect you in the event of a fall, the Caipi uses Kask's innovative MIT design. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. An extended rear section to the helmet boost all-round protection too, covering you to the base of the skull. The integrated peak keeps the sun off, spray out and brushes off trail-side debris.Thanks to the strength of the MIT construction, Kask have also been able to optimise ventilation without compromising safety. The 22 vents of the Caipi ensure your head doesn't suffer from getting too hot and the Sanitized® antimicrobial padding keeps things fresh and prevents an itchy head after a day's riding. WG11 Safety TestThe Caipi passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Caipi has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Features:MIT protection technology - full polycarbonate shell coverExcellent ventilation with 22 ventsGenerous protection and head coverageThermoformed paddingOcto Fit adjustment systemCustom-fit divider on strap for optimal fitLightweight polypropylene visor with integrated ventilationPasses WG11 International Safety Test and CE-EN-1078, CPSC 1203AS/NZS 2063Weight: 250g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Rex MTB Cycling Helmet (WG11)From riding aggressive trails to taking on challenging enduros to long-distance XC marathon racing, the Kask Rex MTB Cycling Helmet (WG11) offers outstanding comfort and protection. It also passes the toughest WG11 International Safety Test.All-over Head CoverageThanks to the mountain-bike specific design of the Rex MTB Cycling Helmet, you'll enjoy excellent head protection for all your off-road action. Kask have ensured the entire head is covered, from the temporal bone in front to the lower occipital at the back. And yet the helmet remains low in weight, tipping the scales at just 310grams (size medium). An innovative In-Moulding system has also allowed the Kask engineers to offer excellent mechanical strength and shock-resistance, keeping you safer should you crash. WG11 Safety TestThe Rex passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Rex has you covered should you be unfortunate enough to fall from your mountain bike. Keep the Air FlowingThis same strength mentioned above also allows for large air vents without compromising safety. A total of 20 front vents keeps the rush of air to your head - whether on fast singletrack or slower technical sections you'll enjoy excellent airflow. This cooling airflow is also complemented by Coolmax pads. This promotes efficient sweat-wicking and evaporation, giving you all-day riding comfort. Kask Octo-FitA rubberised Micro Dial adjuster provides an improved finger grip. Floating cradle supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have also been designed and refined to provide the best fit and support whilst being as light as possible. Whatever the size and shape of your head, you can get a customised fit dialled in easily. Trail-ready FeaturesThe Rex has an easily adjusted visor, the multi-position ratchet making it easy to accommodate goggles of any shape. At the back, an integrated goggle retention clip ensures a secure fit even over the most aggressive and demanding trails. There's also a Lux Leather chin strap for comfort and integrated camera mount to capture all your mountain biking action.Features:In-moulding technology - tough outer bonded to shock-absorbing innerMulti-position Visor (removable)Octo-Fit System ensures a perfect fit for your unique head shape20 air vents keep the head coolChin-strap made from soft, hypoallergenic leatherette for superb comfortIntegrated camera mountGoggle retention strapHand-washable Coolmax padsPasses WG11 International Safety Test and CE-EN-1078Weight: 310g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Rex MTB Cycling Helmet (WG11)From riding aggressive trails to taking on challenging enduros to long-distance XC marathon racing, the Kask Rex MTB Cycling Helmet (WG11) offers outstanding comfort and protection. It also passes the toughest WG11 International Safety Test.All-over Head CoverageThanks to the mountain-bike specific design of the Rex MTB Cycling Helmet, you'll enjoy excellent head protection for all your off-road action. Kask have ensured the entire head is covered, from the temporal bone in front to the lower occipital at the back. And yet the helmet remains low in weight, tipping the scales at just 310grams (size medium). An innovative In-Moulding system has also allowed the Kask engineers to offer excellent mechanical strength and shock-resistance, keeping you safer should you crash. WG11 Safety TestThe Rex passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Rex has you covered should you be unfortunate enough to fall from your mountain bike. Keep the Air FlowingThis same strength mentioned above also allows for large air vents without compromising safety. A total of 20 front vents keeps the rush of air to your head - whether on fast singletrack or slower technical sections you'll enjoy excellent airflow. This cooling airflow is also complemented by Coolmax pads. This promotes efficient sweat-wicking and evaporation, giving you all-day riding comfort. Kask Octo-FitA rubberised Micro Dial adjuster provides an improved finger grip. Floating cradle supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have also been designed and refined to provide the best fit and support whilst being as light as possible. Whatever the size and shape of your head, you can get a customised fit dialled in easily. Trail-ready FeaturesThe Rex has an easily adjusted visor, the multi-position ratchet making it easy to accommodate goggles of any shape. At the back, an integrated goggle retention clip ensures a secure fit even over the most aggressive and demanding trails. There's also a Lux Leather chin strap for comfort and integrated camera mount to capture all your mountain biking action.Features:In-moulding technology - tough outer bonded to shock-absorbing innerMulti-position Visor (removable)Octo-Fit System ensures a perfect fit for your unique head shape20 air vents keep the head coolChin-strap made from soft, hypoallergenic leatherette for superb comfortIntegrated camera mountGoggle retention strapHand-washable Coolmax padsPasses WG11 International Safety Test and CE-EN-1078Weight: 310g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Rex MTB Cycling Helmet (WG11)From riding aggressive trails to taking on challenging enduros to long-distance XC marathon racing, the Kask Rex MTB Cycling Helmet (WG11) offers outstanding comfort and protection. It also passes the toughest WG11 International Safety Test.All-over Head CoverageThanks to the mountain-bike specific design of the Rex MTB Cycling Helmet, you'll enjoy excellent head protection for all your off-road action. Kask have ensured the entire head is covered, from the temporal bone in front to the lower occipital at the back. And yet the helmet remains low in weight, tipping the scales at just 310grams (size medium). An innovative In-Moulding system has also allowed the Kask engineers to offer excellent mechanical strength and shock-resistance, keeping you safer should you crash. WG11 Safety TestThe Rex passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Rex has you covered should you be unfortunate enough to fall from your mountain bike. Keep the Air FlowingThis same strength mentioned above also allows for large air vents without compromising safety. A total of 20 front vents keeps the rush of air to your head - whether on fast singletrack or slower technical sections you'll enjoy excellent airflow. This cooling airflow is also complemented by Coolmax pads. This promotes efficient sweat-wicking and evaporation, giving you all-day riding comfort. Kask Octo-FitA rubberised Micro Dial adjuster provides an improved finger grip. Floating cradle supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have also been designed and refined to provide the best fit and support whilst being as light as possible. Whatever the size and shape of your head, you can get a customised fit dialled in easily. Trail-ready FeaturesThe Rex has an easily adjusted visor, the multi-position ratchet making it easy to accommodate goggles of any shape. At the back, an integrated goggle retention clip ensures a secure fit even over the most aggressive and demanding trails. There's also a Lux Leather chin strap for comfort and integrated camera mount to capture all your mountain biking action.Features:In-moulding technology - tough outer bonded to shock-absorbing innerMulti-position Visor (removable)Octo-Fit System ensures a perfect fit for your unique head shape20 air vents keep the head coolChin-strap made from soft, hypoallergenic leatherette for superb comfortIntegrated camera mountGoggle retention strapHand-washable Coolmax padsPasses WG11 International Safety Test and CE-EN-1078Weight: 310g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Rex MTB Cycling Helmet (WG11)From riding aggressive trails to taking on challenging enduros to long-distance XC marathon racing, the Kask Rex MTB Cycling Helmet (WG11) offers outstanding comfort and protection. It also passes the toughest WG11 International Safety Test.All-over Head CoverageThanks to the mountain-bike specific design of the Rex MTB Cycling Helmet, you'll enjoy excellent head protection for all your off-road action. Kask have ensured the entire head is covered, from the temporal bone in front to the lower occipital at the back. And yet the helmet remains low in weight, tipping the scales at just 310grams (size medium). An innovative In-Moulding system has also allowed the Kask engineers to offer excellent mechanical strength and shock-resistance, keeping you safer should you crash. WG11 Safety TestThe Rex passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Rex has you covered should you be unfortunate enough to fall from your mountain bike. Keep the Air FlowingThis same strength mentioned above also allows for large air vents without compromising safety. A total of 20 front vents keeps the rush of air to your head - whether on fast singletrack or slower technical sections you'll enjoy excellent airflow. This cooling airflow is also complemented by Coolmax pads. This promotes efficient sweat-wicking and evaporation, giving you all-day riding comfort. Kask Octo-FitA rubberised Micro Dial adjuster provides an improved finger grip. Floating cradle supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have also been designed and refined to provide the best fit and support whilst being as light as possible. Whatever the size and shape of your head, you can get a customised fit dialled in easily. Trail-ready FeaturesThe Rex has an easily adjusted visor, the multi-position ratchet making it easy to accommodate goggles of any shape. At the back, an integrated goggle retention clip ensures a secure fit even over the most aggressive and demanding trails. There's also a Lux Leather chin strap for comfort and integrated camera mount to capture all your mountain biking action.Features:In-moulding technology - tough outer bonded to shock-absorbing innerMulti-position Visor (removable)Octo-Fit System ensures a perfect fit for your unique head shape20 air vents keep the head coolChin-strap made from soft, hypoallergenic leatherette for superb comfortIntegrated camera mountGoggle retention strapHand-washable Coolmax padsPasses WG11 International Safety Test and CE-EN-1078Weight: 310g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Rex MTB Cycling Helmet (WG11)From riding aggressive trails to taking on challenging enduros to long-distance XC marathon racing, the Kask Rex MTB Cycling Helmet (WG11) offers outstanding comfort and protection. It also passes the toughest WG11 International Safety Test.All-over Head CoverageThanks to the mountain-bike specific design of the Rex MTB Cycling Helmet, you'll enjoy excellent head protection for all your off-road action. Kask have ensured the entire head is covered, from the temporal bone in front to the lower occipital at the back. And yet the helmet remains low in weight, tipping the scales at just 310grams (size medium). An innovative In-Moulding system has also allowed the Kask engineers to offer excellent mechanical strength and shock-resistance, keeping you safer should you crash. WG11 Safety TestThe Rex passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Rex has you covered should you be unfortunate enough to fall from your mountain bike. Keep the Air FlowingThis same strength mentioned above also allows for large air vents without compromising safety. A total of 20 front vents keeps the rush of air to your head - whether on fast singletrack or slower technical sections you'll enjoy excellent airflow. This cooling airflow is also complemented by Coolmax pads. This promotes efficient sweat-wicking and evaporation, giving you all-day riding comfort. Kask Octo-FitA rubberised Micro Dial adjuster provides an improved finger grip. Floating cradle supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have also been designed and refined to provide the best fit and support whilst being as light as possible. Whatever the size and shape of your head, you can get a customised fit dialled in easily. Trail-ready FeaturesThe Rex has an easily adjusted visor, the multi-position ratchet making it easy to accommodate goggles of any shape. At the back, an integrated goggle retention clip ensures a secure fit even over the most aggressive and demanding trails. There's also a Lux Leather chin strap for comfort and integrated camera mount to capture all your mountain biking action.Features:In-moulding technology - tough outer bonded to shock-absorbing innerMulti-position Visor (removable)Octo-Fit System ensures a perfect fit for your unique head shape20 air vents keep the head coolChin-strap made from soft, hypoallergenic leatherette for superb comfortIntegrated camera mountGoggle retention strapHand-washable Coolmax padsPasses WG11 International Safety Test and CE-EN-1078Weight: 310g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Rex MTB Cycling Helmet (WG11)From riding aggressive trails to taking on challenging enduros to long-distance XC marathon racing, the Kask Rex MTB Cycling Helmet (WG11) offers outstanding comfort and protection. It also passes the toughest WG11 International Safety Test.All-over Head CoverageThanks to the mountain-bike specific design of the Rex MTB Cycling Helmet, you'll enjoy excellent head protection for all your off-road action. Kask have ensured the entire head is covered, from the temporal bone in front to the lower occipital at the back. And yet the helmet remains low in weight, tipping the scales at just 310grams (size medium). An innovative In-Moulding system has also allowed the Kask engineers to offer excellent mechanical strength and shock-resistance, keeping you safer should you crash. WG11 Safety TestThe Rex passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Rex has you covered should you be unfortunate enough to fall from your mountain bike. Keep the Air FlowingThis same strength mentioned above also allows for large air vents without compromising safety. A total of 20 front vents keeps the rush of air to your head - whether on fast singletrack or slower technical sections you'll enjoy excellent airflow. This cooling airflow is also complemented by Coolmax pads. This promotes efficient sweat-wicking and evaporation, giving you all-day riding comfort. Kask Octo-FitA rubberised Micro Dial adjuster provides an improved finger grip. Floating cradle supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have also been designed and refined to provide the best fit and support whilst being as light as possible. Whatever the size and shape of your head, you can get a customised fit dialled in easily. Trail-ready FeaturesThe Rex has an easily adjusted visor, the multi-position ratchet making it easy to accommodate goggles of any shape. At the back, an integrated goggle retention clip ensures a secure fit even over the most aggressive and demanding trails. There's also a Lux Leather chin strap for comfort and integrated camera mount to capture all your mountain biking action.Features:In-moulding technology - tough outer bonded to shock-absorbing innerMulti-position Visor (removable)Octo-Fit System ensures a perfect fit for your unique head shape20 air vents keep the head coolChin-strap made from soft, hypoallergenic leatherette for superb comfortIntegrated camera mountGoggle retention strapHand-washable Coolmax padsPasses WG11 International Safety Test and CE-EN-1078Weight: 310g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.