This superb Shimano R7020 groupset features all the drivetrain components needed to complete your dream bike build or to breathe new life into your existing ride. Packed with some of the finest technologies and engineering around and offering excellent value for money, this stunning kit is an ideal choice of replacement for your old or worn-out existing gear. Included: 2x Shimano ST-R7020 Levers (gear and brake cables included) 2x Shimano BR-R7020 Disc brake calipers 2x TRP disc brake rotors (140mm and 160mm) 1x Shimano FC-R7000 Chainset, 50/34T 1x Shimano FD-R7000-L Front Derailleur (Braze-on type, downswing 1x Shimano RD-R7000 Short Cage Rear Derailleur 1x Shimano R7000 11-Speed Cassette, 11-30T (Shimano 9-11-Speed freehub compatibility) 1x KMC X11 11-Speed chain 1x Shimano BB-RS500 Threaded (English Thread) Bottom Bracket Includes all Tektro outer cables, brake inner cables and gear cables Shimano ST-R7020 Levers including Flat mount Calipers These amazing 11 speed shifters offer great ergonomics cascaded from the Ultegra range, so you can shift to the right gear at the right time while maintaining your momentum. They offer greater reach adjust and a redesigned internal shifting unit for effortless, straightforward operation. You'll benefit from greater rider control in all conditions plus quick and intuitive shifting operation. Furthermore, these offer the same light shifting operation as top tier systems thanks to trickle-down technology. (Please Note: The brakes within this groupset are set up to European standards with the left-hand lever operating the front brake and the right-hand lever operating the rear brake. For UK customers and other parts of the World, you will need to disconnect the brake hoses and swap them over.) Features: Material: Resin and Steel Shifter Type: Dual Control lever Speed: 11-Speed Use: Road Hose Joint: Straight Included: 2xTRP rotors (140mm and 160mm) Brakes come fully assembled and pre-bled ready for installation Weight: 610g (pair) Shimano FC-R7000 Chainset This powerful crankset balances weight and efficiency without sacrificing stiffness, so you can maintain the edge over the competition while out on the road. Its rider-tuned performance with numerous gear combinations means you'll be able to climb and descend with ease. Furthermore, its wider gear pitch increases chain clearance with small gearings and allows for 410mm chainstays on 135mm O.L.D. You'll benefit from optimum power transfer and great frame compatibility for fast and precise pedal stroke performance. Features: Chainline: 43.5mm Technology: Hollowtech II Gear Arm: 4-arm Bolt Circle Diameter (BCD): 4x110mm asymmetric Speed: 11-Speed Q Factor: 146mm Shimano FD-R7000 Front Derailleur This high-quality front derailleur features a wind-cutting ergonomic power curve and a natural stroke feeling, allowing you to comfortably shift. Its integrated cable tension adjustment and shorter rear centre (410mm) with 135mm O.L.D allows for precise and easy front mech adjustment. You'll benefit from lighter front shifting operation and its optimised cage design for disc brake road bikes. Features: Action: Down Swing Chainline: 43.5mm Chainstay Angle: 61-66-degrees Link Bushings: 7 Mount Type: Brazed-On Speed: 2x11-Speed Top Gear Teeth: 46-53T Total Capacity: 16T Weight: 95g (approx.) Shimano RD-R7000 Short Cage Rear Derailleur This 11 speed direct mount compatible rear derailleur features a top-quality Shimano Shadow RD spring for stable shifting performance and wide compatibility. Intended for more aggressive riding styles, its super low profile design carries many benefits. Its low profile and single tension construction means the rear mechanism doesn't hit the chainstay in rough riding conditions allowing for smooth and silent performance. Features: Material: Aluminium Drivetrain Speed: 11-Speed Compatible Chain: HG-EV 11-Speed / HG-X11 Maximum Cassette Size: 11-30T Top Capacity: 35T Max Front Ratio Difference: 16T Low Sprocket: Max: 30T; Min: 25T Top Sprocket: Max 14T; Min: 11T Pulley: 11T Weight: 225g Shimano R7000 11 Speed Cassette This top-performing 11 speed cassette is ideal for getting you up to speed in a flash thanks to its high-performance rider tuned gearing. Its sprockets make shifting easier than before with their precise profile spacing which delivers a flawless and instant experience, making it perfect for keeping the edge over any competition. It's ideal for both club riding and racing. Features: Material: Sprockets: Steel, Nickel Plated; Spider: Aluminium Type: HG-EV Speed: 11-Speed Spider Arm: 1 Lightweight Rider tuned gearing High performance KMC X11 11 Speed Chain This high performance 11 speed chain is specifically designed for the demands of modern road cycling. This model uses its half nickel-plated outer plates to ensure smooth and dependable performance. KMC has also developed this version for extreme durability. Features: Use: Road, Mountain Bike (MTB) Size: 1/2" x 11/128" Pin Length: 5.5mm Quick Link Included: Yes Number of Links: 120 Hi-Performance Half Nickel plated Extremely durable Weight: 266g Please Note: All Tektro outer cables and gear cables are included, there is no need to purchase these in addition to the groupset.
Featuring a carbon fibre hub body and equipped with exceptionally smooth USB bearings to make rolling performance as superb as it can be. These hubs for this new wheel design differentiate in height between front and rear in order to optimise weight savings without negating structural strength in any way. Mega G3 This wheelset features the Campagnolo iconic, performance-enhancing Mega-G3 spoke lacing pattern. This spoke pattern improves energy between the rider and the road, which reduces stresses on the drive side (right side) of the wheel while increasing the rigidity of the wheel overall at the same time. This significant performance enhancement is achieved by the drive side of the rear wheels having twice as many spokes as the non-drive side (left side). 2-Way Fit The 2-Way Fit option makes it possible to fit both a tubeless or clincher tyre. With 2-Way Fit, you are able to personally test which of the two solutions suits best for your riding style, to use a clincher tyre for training and a tubeless tyre for race day. Hand Built Elegance Campagnolo wheels are hand built entirely by specialist Campagnolo wheel builders and are fine-tuned and checked precisely with electronic tools. The ensures that every wheel delivers the high-performance output that Campagnolo wheels are known for.
This Park Tool portable bike stand is ideal for riders who love their last minute tweaks before races or sportives. Note: The maximum weight holding capacity of the PRS-25 is 100 lbs. (45kg). This assumes the weight is centered over the legs.
This hybrid city bike is equipped with a hard-wearing 6061-T6 double-butted aluminium frame with internal cable routing and sporty, eye-catching looks. Thanks to its Shimano Claris R2000 2x8 speed groupset, it delivers smooth acceleration and consistent shifting, wherever your journey leads you. Another highlight is its Tektro cable actuated disc brakes, which ensure safe and dependable stopping power on your travels. Comfortable and Versatile Hybrid Bike The Vitus Mach-3 hybrid bike joins the dots in your lifestyle. From the campsite along the meandering towpath to the picnic spot. From home to the shops. From the office to the cafe. From A to B. A bike that enables you to do more and be healthier. A bike that works for you in the real world. The epitome of multi-purpose, it combines classic hybrid versatility with modern looks and performance. Whether it’s an easy-going leisure ride or a journey with purpose, the Mach-3 is equipped for both function and comfort. Vee G-Sport Tyres and Internal Cable Routing Large volume, comfortable tyres are the perfect all-round choice for cycle paths, country roads or wide forest trails. The addition of mudguard points, internal cable-routing and pannier mounts make the Mach-3 a great option for year-round riding and stress-free touring. The performance is underpinned by a classy lightweight aluminium frame that features a striking kinked top tube, designed to reduce the stepover height for when you might want to leave the activewear at home and ride out in regular clothes. Vitus has purposefully selected quality, reliable components, including the latest one-piece stem and handlebar with ergo-grips to keep weight down, so the bike is low maintenance and feels reassuringly sporty. Journeys by bike are refreshing, invigorating, more enjoyable and fun, and with the Vitus Mach 3 VR Urban Bike (Claris) you can do more of them with ease. Features: Frame: Mach 3 Aluminium, 6061-T6 Double Butted Aluminium, Internal Cable Routing, QR, Flat Mount, Mud Guard Mounts, Rack Mounts Rear Shock: N/A Fork: Mach 3 Aluminium, 6061-T6 Aluminium, Tapered Steerer, QR, Flat Mount, Mud Guard Mounts Use: City - Utility Headset: ACROS Aix-Low R3, Sealed Bearings, OD46, 1 1/8” – 1 ½”, 41.8 / 28.6 – 52 / 40 Handlebar: Vitus Integrated Flat Bar & Stem, 6061 Aluminium, 4 Degree Rise, 9 Degree Sweep, XXS: 640mm, XS: 640mm, S: 640mm, M: 680mm, L: 680mm, XL: 680mm Stem: Vitus Integrated Flat Bar & Stem, 6061 Aluminium, Bar Bore 31.8mm, +/- 15 Degree Grip: Vitus Ergo Grips, Anti Slip, Ergonomic Shape, Integrated Lock Ring Front Rim: Vitus Shining, DB-T280, 700c, 24 Hole, Eyelets Rear Rim: Vitus Shining, DB-T280, 700c, 28 Hole, Eyelets Front Hub: Vitus KT, K68F, 6-Bolt Disc Brake, 24 Hole, QR Rear Hub: Vitus KT, K68R, 6-Bolt Disc Brake, 28 Hole, QR Front Tyre: Vee Tyre Co. G-Sport, 700 x 38c Rear Tyre: Vee Tyre Co. G-Sport, 700 x 38c Spokes: 14G Stainless Steel, 16mm Nipple Chain: KMC HG71, 8 Speed Crankset: Shimano Claris R2000, 50/34T, XXS: 165mm, XS: 170mm, S: 170mm, M: 170mm, L: 175mm, XL: 175mm Bottom Bracket: Shimano Claris R2000, BSA Threaded, 68mm, English Front Brake Set: Tektro C310 Disc, MD-C310, Cable Actuated Disc, Flat Mount Rear Brake Set: Tektro C310 Disc, MD-C310, Cable Actuated Disc, Flat Mount Rotors: Tektro TR-160, Front: 160mm, Rear: 160mm Front Derailleur: Shimano Claris R2000, FD-R2000-F, Band-On, 2 x 8 Speed Rear Derailleur: Shimano Claris R2000, RD-R2000, 8 Speed Left Shifter: Shimano Claris R2000, ST-R2000, 2 x 8 Speed Right Shifter: Shimano Claris R2000, ST-R2000, 8 Speed Freewheel: Sunrace R86, 11-28T, 8 Speed Saddle: Vitus, Steel Rail Seat Post: Vitus 6061 Aluminium, 27.2mm x 400mm Seat Screw: Aluminium 31.8mm, Stainless Steel Bolt Weight: 10.4kg (Medium option) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a SRAM GXP MTB carbon fibre non-drive side crank arm, it is individually calibrated to ensure its accuracy. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust. Reliable Readings In All Conditions To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data. Stable Connection Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance. Compatibility: · Compatible with all SRAM GXP MTB drivetrains · Frame Compatibility: Most frames · Device Compatibility: ANT+, Bluetooth Smart ready · Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others In The Box: · Power meter · High-quality CR2032 coin cell battery · Product identification card with serial number and ANT+ I.D. · Number user guide
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a non-drive-side Stages Carbon crank arm, it is individually calibrated to ensure its accuracy. This particular Stages crank arm is built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust. Reliable Readings In All Conditions To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data. Stable Connection Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance. Compatibility: · Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold separately) · Frame Compatibility: Most frames · Device Compatibility: ANT+, Bluetooth Smart ready · Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others Stages Cycling spindles for 30mm are available in five options to purchase separately: · For SRAM Red 22 BB30 · For SRAM Force 22, Rival 22, Force/Rival CX1 · For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer · For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacer · Race Face Next SL In The Box: · Power meter · High-quality CR2032 coin cell battery · Product identification card with serial number and ANT+ I.D. · Number user guide
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a SRAM Road GXP carbon fibre non-drive side crank arm, it is individually calibrated to ensure its accuracy. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust. Reliable Readings In All Conditions To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data. Stable Connection Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance. Compatibility: · Compatible with all SRAM GXP road drivetrains · Frame Compatibility: Most frames · Device Compatibility: ANT+, Bluetooth Smart ready · Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others In The Box: · Power meter · High-quality CR2032 coin cell battery · Product identification card with serial number and ANT+ I.D. · Number user guide
Specifically developed for the demands of modern E-MTB riding, this suspension fork is equipped with hard-wearing anodised upper tubes for a fantastic balance of strength and durability as well as extra protection against corrosion during wetter rides. Its combination of a lightweight Float EVOL air spring and a RAIL damper smoothen out your ride, so you can stay in full control as you conquer your way from trail to trail. Benefitting from Boost axle spacing and 160mm to 230mm disc brake rotor compatibility, this model is designed prepared for fast and fun adventures, wherever your next ride takes you. AWL: Adventure Without Limits Designed to bring highly evolved, broadly tuneable, super capable, ultra-reliable suspension to the cycling SUV market. Whether you are racing the clock to fit in another lap, or riding further than you have ever before, AWL suspension is here to make every ride limitless. Race Pedigree Leveraging FOX’s extensive experience with building the world’s highest-performance off-road suspension systems, the AWL fork is based around the acclaimed FOX 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plough through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail’s sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance. Everyday Adventure Ready AWL’s stout chassis is available in both 27.5” and 29” wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike’s electric potential, open up new landscapes, and bring adventure to your everyday ride. Technologies: E-SUV Optimised: The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the entire e-cycling continuum have ramped up massively. This has put a whole new set of performance – and safety – demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs. RAIL Damper: RAIL damper is a simplified version of Fox Suspension's renowned GRIP damper. It offers an unmatched ride feel combined with bombproof durability and easy-to-use on-the-fly adjustment ranging from wide open to fully locked out. Manufacturer's Part Numbers: 910-20-210 Black 29" QR110 100mm 51mm 910-21-045 Black 29" QR110 140mm 51mm 910-20-211 Black 27.5" QR110 120mm 44mm
Each of the variants of this bag features a dual protection system that combines a padded outer soft shell and an integrated frame stand, which is compatible with QR and Thru Axle systems. The internal frame defender protects the bike from impacts as well as doubling as a stand whilst the advanced protection features hold the bike firmly in place and use rigid protection shields to protect the most delicate and fragile areas of the bike. The Triathlon (Tri) variant accommodates aerobars that are protected by a padded nylon protection cover with rigid inserts to protect the shifters and bar layout with the mountain bike (MTB) version only needing the handlebars loosened and rotated to fit safely and securely in the travel bag. The Scicon AeroComfort 3.0 TSA Road Bike Travel Bag is light and easy to store when not in use by folding down to a practical size. Weighing at 8/9 kg (Road & Triathlon/MTB), it allows travellers to stay below the maximum allowance of most airlines saving on additional fees. This item is Travel Sentry® Approved with a TSA padlock to ensure no unwanted access but access for customs and security services. The use of the internal wheel pockets and frame defender means that customs personnel can inspect the bike without having to remove it from the bike bag. If you want a safe way to transport your bike around the world, the Scicon AeroComfort 3.0 TSA Road Bike Travel Bag has the perfect balance of protection and practicality. External Dimensions: Road: 109 x 103 x 50 cm Tri: 129 x 98 x 45 cm MTB: 124 x 98 x 25 cm Folded Dimensions: Road: 104 x 93 x 23 cm Tri: 80 x 90 x 23 cm MTB: 116 x 94 x 23 cm
The Robens Double Dreamer 4 Tent sleeps up to four campers, perfect for adventurers looking for base tent comfort with standing height and all-weather performance. Key features include a rain safe side door for water-free access, double rear and low vents to control air flow, also enhanced by mesh panels behind external doors for insect-free ventilation, and an adaptable inner tent that can fold back and enhance living space. Plus, the mesh panel window is backed by a zip-up waterproof curtain with upper PVC panel to balance privacy, ventilation and light entry. Robens Wind Test The determination of the performance of a Robens tent in wind is based on the knowledge and technique available to Robens at the time of testing. During the test they register the maximum (MAX) speed impact a tent was subjected and the average (AVG) wind speed at which structural instability occurred. This may appear as a broken/deformed pole, or the collapse of the tent and subsequent return to shape when the wind drops. At no point was any form of catastrophic failure experienced up to the maximum wind speed. The MAX speed for this tent is 200 km/h, and AVG 165 km/h.
Overcoming the sometimes complicated cable routing of time trial and triathlon bikes, the Dura-Ace R9180 levers bring the confidence of hydraulic disc brakes to the sleekest bikes in the world. Combined with the plug and play ease of Shimano Di2 electronic shifting, they offer an advantage in any race. Aerodynamic and Ergonomic Smooth Gear Shifting Performance Optimum power transmitted with firm grip for a more aerodynamic and better grip feeling. The gear switch button is integrated inside and can be used without needing to change your hand grip. This ensures intuitive shifting control and enables you to maintain a firm grip when shifting through the gear range. Shimano Synchronized Shift System Compatible A single shifter button on each side of the shifting lever is optimised to function seamlessly with the Shimano Synchronized Shift system. This gear system offers better control and confidence in race conditions and is customisable to fit in the rider’s riding style. Plus, each switch has the option for multi-shift ON or OFF. And it’s compatible with Shimano E-Tube for internal cable routing for a cleaner cockpit area and stylish aesthetics throughout.
This superb package is one of the most eagerly anticipated groupsets of recent years. Additionally, this stunning set includes a Shimano press fit BB86 bottom bracket. Smooth, crisp and precise shifting combined with reliable and powerful braking makes this an immensely efficient groupset. Included: 2x Shimano ST-R7020 Levers (gear and brake cables included) 2x Shimano 105 R7000 Rim Brake Calipers 1x Shimano FC-R7000 Chainset, 50/34T 1x Shimano FD-R7000-L Front Derailleur (Braze-on type, downswing 1x Shimano RD-R7000 Rear Derailleur 1x Shimano R7000 11-Speed Cassette, 11-30T (Shimano 9-11-Speed freehub compatibility) 1x KMC X11 11-Speed chain 1x Shimano BB-SM-BB72-41 Pressfit Bottom Bracket Includes all Shimano SP41 outer cables, brake inner cables and gear cables R7000 Chainset: With the 105 R7000 Compact Chainset, Shimano has found the perfect balance between weight, efficiency and comfort without sacrificing stiffness or power-transfer.This crankset design pushes advancements in modern drivetrain performance and provides levels of efficiency and comfort that until now have not been achieved. Chainset Features: Material: Crank Arms, Chainrings: Aluminium; Axle: Steel Bolt Circle Diameter: 110mm Q-Factor: 146mm Bottom Bracket Standard: HollowTech II Chainring Gear Ratio: 52-36T Compatible Chain: HG-EV 11 speed / HG-X11 Drivetrain Speed: 11 speed 105 R7000 Double Shifter Set The 11-Speed Shimano 105 R7000 Shifter Set is the evolution in Shimano mechanical drivetrain performance. Borrowing trickle-down technology from the Dura-Ace and Ultegra high-end competition shift levers, these levers provide crisp, super-smooth shifting and brake performance that feels absolutely superb to use. Re-Designed, Enhanced and Optimised The internal shifting mechanism has been re-designed and enhanced to provide smoother operation and more precise actuation when shifting between gears, even when under load. The lever features a greater reach-adjustment range with very easy access to the inner shift cables when the time comes to maintain/adjust. This new system provides a fast and easy shifting experience, which ensures that race performance is always at 100%, and as a bonus, Shimano has fine-tuned the front lever shifting curve, which makes for a much lighter front derailleur shifting compared to previous models. Features: Material: Aluminium Type: Dual Control, SLR-EV Brake System: Mechanical Drivetrain Speed: 2x11 speed Weight: 251g 105 R7000 Front Derailleur: The 11-Speed Shimano 105 R7000 Front Derailleur has an ergonomic, smooth to shift power-stroke, which provides a very natural shifting feel and lighter mechanism actuation. It also is compatible with most cable routing options on the market and comes equipped with an integrated cable tension adjustment screw for superb adjustability and convenience. Features: Material: Clamp: Aluminium; Plate: Steel Mount: Braze-on Type: Double Compatible Chain: HG-EV 11 speed / HG-X11 Top Gear Teeth: 46-53T Total Gear Capacity: 16T Drivetrain Speed: 11 speed Weight: 95g 105 R7000 Rear Derailleur (Medium Cage) The Shimano 105 R7000 Rear Derailleur features Shimano Shadow technology, which not only smooths shifting performance but also stabilises chain movement and keeps the derailleur low-profile, tucked tight to the chainstay. It is capable and fully efficient at shifting across a wide gear ratio while doing so with buttery-smooth shifting performance. Rear derailleur drivetrain performance has never been as smooth, reliable and as precise as this! Features: Material: Aluminium Drivetrain Speed: 11-Speed Compatible Chain: HG-EV 11 speed / HG-X11 Total Capacity: 35T Max Front Ratio Difference: 16T Low Sprocket: Max: 30T; Min: 25T Top Sprocket: Max: 14T; Min: 11T Pulley: 11T Weight: 225g 105 R7000 Rim Brake Calipers The 105 R7000 Brake Caliper is the latest innovation in affordable, pro-level braking performance from Shimano. Providing an exceptional linear braking curve, enabling you to precisely time your braking with more accuracy than ever before. It provides a very noticeable balance between feel, stiffness, stopping power and response; it is the most inspiring brake system to use for the aspiring podium chaser. Compatible with SLR-EV brake levers to provide the optimised braking control and elegant performance. Features: Material: Aluminium Type: SLR EV Dual Pivot Reach: 51mm Maximum Tyre Size: 28c Weight: 379g 105 R7000 Cassette The Shimano 105 R7000 Cassette provides precise 11-Speed shift ramping and is a foundation for top-level drivetrain performance. Designed to provide wider gear choices and wider ratios to suit individual rider preference and to provide a range of options to suit the task at hand. Featuring a durable, lightweight construction, which is weather and wear resistant while providing professional level 11-Speed drivetrain performance. Features: Material: Sprockets: Steel, Nickel Plated; Spider: Aluminium Type: HG-EV Compatible Chain: HG-EV 11 speed / HG-X11 Drivetrain Speed: 11 speed Weight: 284g (11-28T) Please Note: The 11-34T version of this cassette is the "CS-HG700" model as Shimano does not make the CS-R7000 in an 11-34T version. 105 R7000 HG701 Chain New symmetrical design chain that offers smooth shifts and maximum durability. It has been designed to run specifically with Shimano 11-speed Dyna-Sys systems for optimal pedalling efficiency. Features: Outer plate design has been developed to reduce the chance of chain suck Sil-Tec surface treatment technology (PTFE plating) on inner links that is smooth running and increases durability Number of Links: 116 The inner plate has been developed for better contact with gears providing smoother shifting under high load, giving efficient pedalling, increased rigidity and near silent running Chain Width: 5.62mm Average Weight: 257g
Outwell’s Parkville 200SA Awning is easy to attach to your van with a fast-pitching, inflatable drive away awning system that creates the versatility you need when touring. Extra wide side doors, with large, tinted windows keep the Parkville 200SA airy and light, with adjustable levels of ventilation. The expansive living room delivers plenty of headroom and can be fitted with an optional inner to create privacy between sleepers. Meanwhile, the front canopy delivers additional shelter while allowing for fantastic views of the great outdoors. Specifications Type of Tent: Drive-away campervan awning Flysheet: Outtex® 6000 Express RS, 100% polyester Hydrostatic Head: 6000mm Roof Connection Length: 260cm Attachment Height: 175-200cm Bead Thickness: 7mm/ 5mm Tubes: Power Air System frame for best performance Maximum Pressure: 9 psi/0.6 bar Poles: Duratec fibreglass 9.5 mm Groundsheet: Double-coated waterproof polyethylene, 100% polyethylene Colour: Black/Grey Pack Size: 82cm x 40cm x 40 cm Weight: 21.6kg
Super Record components have always gone hand-in-hand with competitions and wins, and still today represents for professional racers the certainty of fast and extremely precise shifting, even under load. You don't have to be a pro to take advantage of Campagnolo's best performance features, the fun is for all. Ultra Efficient The revised shape of the external components of the Super Record HO allows it to move efficiently to give maximum performance at any angle. The design of the cage keeps the chain closer to the cassette to ensure better power transfer, a more positive drive, whilst perfectly following the curve of the sprockets. This better chain/sprocket interface also gives greater durability of components. Disc Brake Frame Specific This HO (hydraulically optimised) version is specifically designed for use on disc brake frames that feature the wider 12x142mm rear dropout spacing. It features an adapted mounting link for easier thru axle removal and larger teeth on the upper pulley for precise shifting at more extreme chainlines.
This dual-sided powermeter comes factory fitted into the crankarms of a Shimano 105 R7000 crankset, which makes it ideal for road cyclists who want to take their training sessions up a level. With an ultra-precise +/- 1% accuracy, this model is all set for helping you reach your performance goals. Another highlight is it boasts up to 100+ hours of battery life from its long-lasting lithium-ion coin cell battery. Used to pace attacks up the Alpe D’Huez in the Tour de France and to hammer on the Queen K during the Ironman World Championships, the Precision Pro Powermeter delivers industry-leading accuracy and reliability when you need it most. Through 4iiii's patented 3D Strain Gauge technology, you can be assured that the data you depend on will help lead you to your own Yellow Jersey. The Precision Pro will allow you to view advanced metrics like left/right balance, pedal smoothness, torque effectiveness, and provide you with the most accurate power numbers during training and racing. Ridden by the top cyclists and triathletes in the world, the Precision Pro is the ultimate training tool to help you reach your goals. The Precision Pro Ride Ready comes pre-installed on a new Shimano 105 R7000 crankset. 3D Power Measurement When you put force through your pedals or crank, it doesn't just bend the crank - it twists and flexes in all three dimensions. 4iiii's patented 3D power measurement system measures this multidimensional strain, so you can be confident that your unique pedal stroke is still measured accurately no matter your riding conditions. Industry Leading Accuracy 4iiii's +/- 1% accuracy isn’t just a claim, it’s been third-party tested and validated by leading scientists and the Locomotion Lab at the University of Colorado. You can plan your training, pacing, and racing with confidence knowing that your data is always going to be consistent. Don’t limit your potential with unreliable data. Dual Channel ANT+ and Bluetooth Smart 4iiii Powermeters communicate their measurements over both the widely-used ANT+ and Bluetooth Smart radio standards, letting you read and record your power numbers on an enormous catalogue of head units, sports watches, smartphones, and computers. 3 Year Manufacturer's Warranty 4iiii Powermeters are waterproof, durable, and designed to be accurate and precise even in the harshest conditions. Because of this, 4iiii are happy to offer an industry-leading 3-year warranty. Technologies: In The Box: Once your ride-ready Precision Pro powermeter arrives, it just needs to be installed on your bike using the standard Shimano crankset installation process. Connect a head unit or computer, and you can start riding with power! Warranty and Durability: Ridden through rain storms at Strade Bianche, mud-filled cross country mountain bike races, and even tested amidst the salt spray of the ocean on Oracle Team USA's America's Cup competitors, you can be assured that your 4iiii Powermeter will be as tough as you are and is backed with an industry-leading 3-year warranty. All 4iiii Powermeters are IPX7-rated for water immersion up to one meter and backed with an industry-leading 3-year warranty. Indoor Training: If the weather or climate makes riding outdoors tough, your 4iiii Precision Pro powermeter can be used with all popular indoor-training apps, such as Zwift, TrainerRoad, Wahoo SYSTM, Rouvy, and more. Simply use your favourite app's connection procedure over ANT+ or Bluetooth Smart, put your bike on a trainer, and get riding! Manufacturer's Part Numbers: PMD100-S11A02A Black 52/36T 160mm PMD100-S11D02A Black 52/36T 175mm PMD100-S11D01A Black 50/34T 175mm PMD100-S11B01A Black 50/34T 170mm PMD100-S11C02A Black 52/36T 172.5mm PMD100-S11C03A Black 53/39T 172.5mm PMD100-S11C01A Black 50/34T 172.5mm PMD100-S11D03A Black 53/39T 175mm PMD100-S11B03A Black 53/39T 170mm PMD100-S11B02A Black 52/36T 170mm PMD100-S11A03A Black 53/39T 160mm PMD100-S11A01A Black 50/34T 160mm
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to an FSA SL-K BB30 non-drive side crank arm, it is individually calibrated to ensure its accuracy. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust. Reliable Readings In All Conditions To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data. Stable Connection Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance. Compatibility: · Across the board compatibility with FSA and Vision BB30 models · Frame Compatibility: Most frames · Device Compatibility: ANT+, Bluetooth Smart ready · Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others In The Box: · Power meter · High-quality CR2032 coin cell battery · Product identification card with serial number and ANT+ I.D. · Number user guide
Ready for fast-paced trail adventures, the Marzocchi Bomber Z2 fork features a rock-solid aluminium upper tube construction. This allows it to handle all the knocks and bumps as you weave from trail to trail at speed. Built for the long haul, its hard-wearing design makes it more than capable of withstanding the challenges that come with all-day epics in the mountains. Mountain Bike Fork with Rail Sweep Adjust Damper Designed for versatility, this trail-ready fork is kitted out with a Rail Sweep Adjust damper. This means you'll enjoy its full-compression and rebound damping from its dynamic, shim stack design. Its mid and high-speed rebound circuit also provides greater control with superior bump recovery. As a result, the Marzocchi Bomber Z2 boost fork won't pack down during fast and deep hits as you blast across the mountain with precision. One final highlight is its adjustability allows you to tweak its compression, to suit your riding style, personal preferences and the terrain conditions for a more rider-tuned feel. EVOL Air Spring All set for the wildest of mountain bike rides, this MTB fork is equipped with an EVOL air spring. It works by increasing negative air spring volume to specifically provide optimum small bump sensitivity. This means you'll enjoy its smooth performance as you pedal over the rock gardens, tree roots and debris with momentum. This is the ultimate choice of upgrade for riders who want outstanding front-end suspension on the toughest of mountain bike trails.
Optimised to be more accurate and easier to calibrate and setup, this versatile pro-level truing stand is robust and durable. It’s engineered to accurately self-centre virtually any diameter of wheel size (16" to 29") and any tyre width up to 5"+ without having to remove disc brake rotors. Precise, Accurate and Reliable Professional Wheel Truing Performance Featuring an immensely reliable and long-life construction, this Wheel Truing Stand is built of chrome-plated powder-coated heavy gauge steel and provides flex-free performance. Precisely adjustable and keeps wheels centred with its tall and movable uprights, this immensely accurate design also features direct-action truing calipers. These additional truing calipers allow you to work on the narrowest of rims to the fattest of tyres with superior accuracy with hassle-free functionality. Plus, it is equipped with all the frills you require for the ultimate-adjustability and wheel compatibility - including, a built-in Speed Knob to quickly change axle widths and thru-axle adaptors, and it's equipped with removable and replaceable nylon caliper tips to protect painted and anodised rims.
Packed with some of the finest technologies available from Fulcrum, this gravel wheelset gives riders maximum performance when exploring the back roads. It features two robust aluminium rims, making it perfect at handling all the abuse that's associated with long days in the saddle. Fulcrum has also put each wheel through a CNC-machining process that shaves off any unnecessary weight and maintains strength. The result is an exceptionally lightweight wheelset that's also highly durable on every ride. The world of Gravel riding is tough to define with every cyclist likely to do things slightly differently from one another. It is with versatility in mind that Fulcrum have designed the Rapid Red 3. This is a completely new project designed for mixed terrain, constructed from a fully CNC machined piece of aluminium, which keeps them lightweight. These wheels are designed to be versatile, light and durable. Exploring B-roads along quiet secondary paved and unpaved roads, with some off-road sections thrown in for fun, on drop bar bikes and wider tyres is something that we know and love here at Fulcrum. The Rapid Reds, created from a completely new project, are perfectly at home on mixed terrain. Constructed completely with a machined CNC aluminium section, which significantly lowers their weight, their 24 mm internal rim width is ideal for current frames designed around larger wheels. The celebrated 2-Way Fit™ Ready system allows you to run the wheels tubeless or with the classic clincher and inner tube, ensuring the widest possible compatibility with most tyres available on the market. The choices don’t stop there: they are available in 700C (starting width 30mm) or 650B. With the various options possible, from wheel size to tyre type, you can either make this wheel extremely fast on the road or unstoppable in the most demanding off-road situations. In fact, they are classified for ASTM 2 riding conditions. Item Top Features Continued: Tyre Size: 700c Discipline: B-ROAD (Gravel) ASTM Category: 2 Front Axle Compatibility: HH12-100 Rear Axle Compatibility: HH12-142 Front Wheel Spokes: 24 Rear Wheel Spokes: 24 Spokes Material: Stainless Steel, double-butted Spokes Profile: Rounded, straight-pull Nipples: Aluminium Front Hub: Aluminium, oversize flange Rear Hub: Aluminium, oversize flange Bearings: Adjustable Cup & Cones bearing system Others: Reflective stickers, Aluminium axle Single or Pair: Pair Weight Limit: 120kg (comprising cyclist, bike, equipment and luggage ) Weight: 1740g Manufacturer Part Numbers: 106099289 FULC0146873 Black 700c SRAM XD XDR 106099290 FULC0146877 Black 650c Shimano 106099291 FULC0146871 Black 700c Shimano 106099292 FULC0146879 Black 650c SRAM XD XDR
The North Face's Tadpole SL 2 Person Tent combines protection and durability with optimum convenience. Suitable for sleeping up to two adventurers, it boasts a two-pole design featuring Carbon-Fibre Easton Syclone™ 2.0 poles that are lightweight and robust, while the single-wall cuts down set-up time and makes it quick and easy to pack away when not in use. This is further complemented with waterproof nylon cuts and non-PFC Durable Water Repellent treatments to keep all rain out. The single-door also provides a spacious vestibule for storing gear or socialising while taking in the sights, offering easy extra space and saving on weight. Stake-out points lifting from two points of the tent additionally increase the interior and make the living space roomier. Lastly, high-low venting and built-in mesh on the door ensure breathability for a comfortable night's sleep.