Dirt is disintegrated into miniscule particles that are kept within the fibres of the cloth. The result? The surface is perfectly clean with an in-depth shine that has to be seen to be believed! Ideal for use after washing to dry your bike in record time!
The Claw brush has tough impact resistant handles, with ultra stiff nylon bristles, and the combination handle/comb allows for easy cleaning of tough grime around rear cassette.
Muc-off's advanced ‘Dry Formula’ creates a clean, durable and protective chain wax layer that inhibits rust development and chain link corrosion. It’s clean, and it’s easy to use! Directions for use: 1. Clean drive chain thoroughly before lube application. 2. Ensure drive chain area is dry. 3. Apply a moderate amount of Dry Lube to the inside chain link while spinning pedals in a reverse motion. 4. Wipe away any excess lube.
The two prong brush excels in getting into hard to reach areas of the bike - ideal for spokes and discs, cranks and pedals. Explore the Muc-Off brush range to find out which is best for each part of the cleaning process, and which are best to use on different parts of the bike.
This glue and sealant remover is equipped with a non-aggressive proprietary formula that helps remove rim tape glue, sealant or tubular glue residue from inside rims (and many other surfaces) prior to applying Muc-Off Tubeless Rim Tape (available separately). Muc-Off has made it easy to use thanks to its spray-on aerosol design that's safe to use on most metal, plastic and carbon fibre surfaces. Ideal for keeping in your home workshop for when it's time to carry out maintenance on your wheelset. Going Tubeless Muc-Off Glue & Sealant Remover is the perfect companion for preparing your rims for a tubeless setup. Removes Sealant Residue The non-aggressive formula is perfect for removing stubborn rim tape glue and sealant residue prior to applying Muc-Off Rim Tape. Removes Sticker Adhesive It’s also perfect for removing sticker adhesive from your bike – whether you’re building your bike straight out of the box or just switching up your decals! Easy to Use The Glue & Sealant Remover comes in a handy spray aerosol which makes it super easy to dispense directly onto your rims whilst you work. Manufacturer's Part Number: 20130 200ml
Perfect for taking on all the challenges of riding off-road, this stunning version features ample spacing between its rubber block pattern. This creates an exit channel through its construction for muck and water to slide through as you weave from trail to trail. These WTB MTB grips will provide you with all the control you need.
This handlebar clamp has been specially designed as a replacement for Magura HS11/HS33 disc brake levers. Genuine Magura spare part. Please Note: Bolts are not included.
Ready for the long haul, this inner tube is pre-inflated and inserted into a mould to ensure that its got an even wall thickness and superb air retention. Schwalbe also stores these tubes under pressure for 24 hours to test the air retention, so you can benefit from its reliable performance on your road bike. Weighing only 130g, this is a light and efficient replacement that will get you back on the road.
Kitted out with 370mm-long tethers and highly adjustable steel buckles, these Christophe Leather straps are a luxury option for any toe-clip setup.
This genuine Shimano replacement rear belt sprocket is specifically designed for use with Shimano Alfine CDS ECO. Additionally, it is ideal for replacing your old or worn out existing model.
These replacement Shimano Dura Ace 7900 Brake Pads are designed for road bikes that have alloy rims and they are compatible with Shimano Dura Ace 7900 series brakes. Offering exactly the same specification as originally supplied, these ensure consistent performance on every mile. Featuring the brand's R55C3 compound, these deliver a reduction in wear and benefit from 20% more braking power in dry terrain.
Shimano has adopted Ice-Technologies into its disc brake pad range to provide the cooling technology required for consistent performance. This means the Shimano B01S brake pads also produce less noise than metal pads and offer increased modulation. These disc brake pads are compatible with Acera and Altus brakes and many others too. Compatible with the Following Shimano Models: BR-C501; BR-M485; BR-M445; BR-M395; BR-TX805; BR-M575; BR-M475; BR-M416; BR-M375; BR-M525; BR-M465; BR-M416A; BR-M355; BR-M495; BR-M447; BR-M415; BR-T675; BR-M486; BR-M446; BR-M4050; BR-T615
The close-ratio gearing of the Shimano HG50 9 speed cassette allows more efficient use of energy through finer cadence control. The sprockets are cut away to further reduce weight without reducing rigidity and the Nickel-plated finish offers hard wearing resistance to corrosion.
Uses same splined fit as all 7, 8, and 9-speed Shimano Freehubs
Ideal for use with numerous mountain bike (MTB) brake models and they offer reliable braking performance in all conditions. Compatible Models: BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M445, BR-M416-A, BR-M416, BR-M415, BR-M375, BR-T615
These superb pads are great for replacing your old or worn-out existing model. Available in three different options, these brakes are suitable for Shimano, Saint and Tektro brakes. Please choose the relevant option to match your current brakes. Manufacturer's Part Numbers: Green: Shimano Deore M525 - M575: 2905757801 Green 2: Saint M810-820 Zee M640: 2905755501 Green 3: Tektro Dorado HDE710: 2905755301
With compatibility for both Presta and Schrader valves, this Topeak Master Blaster Pump not only packs a punch, but offers excellent value for money.
This low-weight, plastic hand pump from Topeak is a highly efficient inflator, maxing out at 90psi for quick and easy pumping when you need it most. Compatible with Presta, Schrader and Dunlop valves, it will work on most commonly used tyres. Equipped with a T-handle for comfort while blasting away and a handy side mount bracket for carrying on your bike, the Peakini II Mini Pump offers top convenience and practicality from its small but impressive build.
Economic and safe to use, these versatile and time-saving inflation cartridges are compatible with Topeak's CO2 inflators, including the HybridRocket MT, AirBooster and MicroAirBooster, as well as any threaded pump valve-heads. Designed with a threaded neck for the easiest of attachment, each canister contains a 16g blast of carbon dioxide to get you back up to speed in an instant.