These highly durable Clarks brake pads are available for the following manufacturers: Magura, Shimano, Diatech, Kinetic, RST, Hope, Formula, Avid, Promax, Hayes, Giant and Grimeca. Clarks have formed a global association with Carbone Lorraine, the world's largest disc brake manufacturer. In the last 100 years, they have continued to manufacture for the Aviation, Automotive, Motorcycle, Train and Cycle Industries. Compatible with: VRX843 - Hayes Stroker Ryde, Stroker Dyno VRX808 - Magura Julie 2001-2008 VRX801 - Hope Mono 4, Mono 5; SRAM 9.0; Shimano XT M755, XT M756, XT M775 VRX811 - Clarks Clout 1, S2; TRP Spyre, Hylex; Tektro Auriga, Draco, Dorado, Orion, Aquila, HDC300; Shimano Deore BR-M515, Deore M475, Deore M525, Deore M465, Deore M495 VRX813 - Avid BB7, Juicy Ultimate, Juicy Carbon, Juicy 3, Juicy 5, Juicy 7, Juicy 7 Carbon; Clarks CMD-15 VRX814 - Hayes HFX1 to HFX9 VRX815 - Clarks Exo, Skeletal; Magura Marta 2002-2008, Marta SL VRX824 - Clarks HDB-540, HDB-600, HDB-790, CMD-24; Shimano XT M765, XTR M965, XTR M966, Hone M601, LX M585, LX M858 VRX833 - Formula Oro VRX841 - Avid Elixir CR, Elixir R, Elixir 1, Elixir 3, Elixir 5, Elixir 7; SRAM XX, XO VRX843 - Hayes Stroker Ryde and Stroker Dyno
Patterned with a 'Snake Skin' design, this excellent tape stays breathable and grippy in all conditions and is adept at absorbing shocks thrown up by the road. easily installed thanks to its flexibility, each pack comes with a set of end caps to ensure a snug fit and finish.
This universal brake cable set contains everything needed to replace your front and rear brake cables and is compatible with MTB/hybrid bikes with flat bars as well as road bikes with drop bars. Cables have both Pear and Barrel ends to suit MTB & Road brakes. You will need to cut off the end that is not required.
With a special DACROMET® suface coating, these chains are particularly resistant to rust and require little maintenance making them perfect for use in winter conditions.
Super lightweight butyl tube, even lighter than latex but not porous, so no need to reinflate every day. Can also be fixed with a normal puncture kit. The long valve inner tubes enables you to use deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. Weight: 51mm Presta Valve Inner tube - 90g Use: All purpose inner tube and excellent replacement inner tube for your road bike Material: Butyl tubes with renowned Vittoria quality Durability: Each and every inner tube passes a stringent 100% quality control inspection Threaded valve stem Use: All purpose inner tube and excellent replacement inner tube for your road bike Material: Butyl tubes with renowned Continental quality Durability: Each and every inner tube passes a stringent 100% quality control inspection Design: Seamless construction, with a mould-cured vulcanisation, to ensure uniform roundness and give a smooth ride and handling #Please note Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels.
Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm but are not ideal for wheels with rim depths of 40mm or above (as the shorter valve would not extend out of the rim valve hole). Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commanly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. 650c Wheel Sizing Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels. Based on ETRTO (European Tyre and Rim Technical Organisation) dimensions, 650c wheels are smaller than 700c wheels by about eight percent. Please, when on this page make sure you are buying the correct tyre size for you wheel. Check the sizing on your tyre before purchasing from this page. Tyre sizes tend to be printed on the sidewalls so please check before making a purchase.
High quality 26" MTB butyl tube ideally suited for the demands of downhill trails.
The long valve inner tube enables you to use these with deep section rims (40mm, 50mm and above) as the shorter valve would not extend out of the rim valve hole. Shorter valve inner tubes are ideal for wheels with rim depths of 24mm or 30mm. Presta valve tubes are most commonly used for road wheels (650c) and on a few MTB wheels as the valves are thin, whereas Schrader valves are more commonly found on MTB wheels as valve is larger and won't fit through 650c rim valve holes. 650c Wheel Sizing Be aware that when purchasing a 650c inner tube, tyre, or wheel from the Wiggle site that what you are buying is smaller than a more conventional road 700c inner tube, tyre, or wheel. Most road bikes nowadays come fitted, as standard, with 700c wheels (including inner tubes and tyres) and not 650c. A 650c inner tube or tyre WILL NOT fit a 700c wheel. Please read the 650c Wheel Sizing guide explaining the difference between 650c and 700c wheels. Based on ETRTO (European Tyre and Rim Technical Organisation) dimensions, 650c wheels are smaller than 700c wheels by about eight percent. Please, when on this page make sure you are buying the correct tyre size for you wheel. Check the sizing on your tyre before purchasing from this page. Tyre sizes tend to be printed on the sidewalls so please check before making a purchase.
Can be attached to Elite trainers for storage
Keeping your momentum flowing, this road-focused flat bar brake lever utilises Shimano Linear Response technology to reduce friction in your caliper, lever and cables. This means you'll enjoy improved responsiveness and modulation on your daily commute or journey to the coffee shop. One final highlight is it's kitted out with an adjustable reach, so you can easily fine-tune the distance between your handlebar and each lever for a more customised feel. Technologies: Super SLR: SLR stands for SHIMANO Linear Response. The SUPER SLR design makes use of a friction-reducing mechanism in the caliper, lever and cable that improve response and modulation. Also for the lever, the SERVOWAVE mechanism is adopted to provide quick contact of shoe to rim and longer stroke from the initial braking effect for better control. SLR is the essential factor in the SHIMANO dual-pivot caliper that deliver more braking power than conventional side-pulls. Reach Adjust: Brake lever is equipped with a reach adjust mechanism. The distance from the handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.
Coming kitted out with one tension pulley and one guide pulley, these jockey wheels are a superb upgrade for keeping your drivetrain running smoothly and friction-free.
A Simple silicon ring that fits around your seatpost to add an extra touch of colour to your bike. Also helps reduce water and dirt ingress into the seat tube, as well as marking saddle height.
Each roll is long enough to ensure complete coverage on all handlebar sizes and has a waterproof adhesive backing tape.
Durable and lightweight alloy construction.T-shape design gives a secure bottle fit while special dampers prevents scuff marks.
The 90-degree bend is designed to be compatible with disc wheels. The 2-piece Composite Matrix design makes replacing O-ring seals quick and easy. It is Compatible with all ABS Flip-Thread Chucks and available on all Flip-Thread Chuck equipped pumps.
Highly penetrative and long-lasting, the Dry Lube 50ml has been specially formulated to make sure your chain and other components can cope with the impact and stress that riding dry and dusty trails can put on them. Biodegradable and containing state-of-the-art qualities that allow for deep and thorough permeation of every link of your chain, this highly versatile dry weather chain oil is a life-saving and chain-prolonging lube from Muc-Off.
Magura O-Rings for banjo hose fitting.
This stunning model features a reversible design which means it can be mounted to take the bottle from the right or the left. Additionally, its thermoplastic resin construction is resistant and strong, making it ideal for life on the road. Finally, the Zefal Wiiz bottle cage weighs in at only 65g, so you won't have to worry about any excess weight holding you back.
A handy replacement or upgrade kit for 150x12mm hubs and those already converted to 157x12mm.