This pair of Nukeproof Horizon V2 wheels comes equipped with the brand's extensively trailed and tested alloy blend, which includes a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this wheelset gives you the best of both worlds in terms of strength, stiffness and weight. Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub The Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future. The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in. A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres. By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split. Additional Item Top Features: Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant A full range of spares are available to service your hub in the future. 141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"
Spinning on a CrMo axle, a reliable and strong engagement to your cranks is assured, while the ribbed body section enhances traction for a better grip to your sole. Coming with brass cleats and shims, these hard-riding pedals come with eight optimally-placed pins, letting you ride with controlled aggression whether clipped in or not. Designed with a 15-20 degree release angle, cleat entry and removal is comfortably simple, allowing you to focus on a truly fearless flight to the finish.
SRAM XX1: Driven by a cutting edge, single-ring carbon crank and seamless component integration, SRAM 1X drivetrain delivers flawless chain management and faster, more precise shifting. But the relationship between XX1 components goes far beyond fitment. From the X-Horizon rear derailleur with Type 2 technology to the super wide range 11 speed 10-42T cassette, each component is designed to function synergistically with the others, achieving what no other 1X drivetrain has before.
These forks feature a proven DebonAir spring and Motion Control damping, which smoothens out your ride as you shred across aggressive off-road terrain conditions at speed. Coming equipped with 35mm straight wall aluminium upper tubes and magnesium lower legs, these forks are an ideal upgrade for riders who want a stronger front-end suspension set up without adding any excess weight to their E-MTB. E-MTB endorsement options with fender mounts are appropriate for all E-bikes. Graphics are easy to read and make a fresh impact. Motion Control™ damping featuring low speed compression adjustment to lockout. Highly tunable DebonAir™ spring offers a consistent feel throughout the travel. Fits tyres up to 2.8" (without fenders; the use of a full fender will reduce tyre clearance). Fast Black finished 35mm Aluminium upper tubes couple stiffness and lightweight with a premium look.
Lightweight, stiff and responsive, the Judy Gold model sports a Motion Control RL damper, is compatible with OneLoc and TwistLoc remotes and has Fast Black upper tubes for an unmistakable RockShox look and smooth performance. Additional Features: Fork Offset: 27.5": 42mm; 29": 51mm Axle: 15x100mm Boost Maximum Rotor Size: 200mm Recommended Rear Shock: Monarch R, Deluxe R Manufacturer's Reference Number: 27.5” / 100mm Travel / 42mm Offset: 00.4019.912.000 29” / 100mm Travel / 51mm Offset: 00.4019.912.006 29” / 120mm Travel / 51mm Offset: 00.4019.912.005 Technologies: Solo Air: Solo Air's enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So they’re always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market. Technologies: Solo Air: Solo Air is like a Buddhist monk. Its enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So, they’re always in perfect equilibrium, like Yin and Yang to give you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market Motion Control: Motion Control damping is seamless, effective, and offers a simple low-speed compression adjustment coupled with a blow-off valve. Boost: Boost is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with shorter chainstays, wider and stiffer suspension pivots, a wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheels. Torque Caps: Torque Caps make the bond between hub and fork dropout stronger, with an increased surface area connecting the two. This creates a stronger, stiffer interface, giving you a more responsive front wheel and more control. So you concentrate on the most important connection, the one between your bike and the trail.
Yari features a stiff chassis combined with the DebonAir air spring and a proven Motion Control damper, which makes it hard-hitting and capable enough to handle the unique rigours of enduro and E-MTB riders alike. Yari is the enduro option for those who ride hard on a budget. - Updated highly tuneable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. - New graphic package for a fresh, premium look. - Motion Control damping featuring low speed compression adjustment. - Chassis derived from Lyrik. Bottomless Tokens Bottomless Tokens allow you to easily custom tune your air-spring performance to best match your riding style and suspension preference. Adding the easy-to-install Bottomless Tokens changes the air-spring curve to resist bottom-out after a big hit, giving aggressive riders the power to attack the trail harder. Removing Bottomless Tokens makes the air-spring curve more linear, enhancing suspension feel for certain types of terrain or trail conditions and ensuring riders who are less front-end aggressive benefit from 100% of their fork’s travel. DebonAir Air Spring A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. Motion Control Motion Control damping is seamless, effective, and offers a simple low-speed compression adjustment coupled with a blow-off valve. SAG Gradients Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won’t find this anywhere else but RockShox. Boost Boost is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with shorter chainstays, wider and stiffer suspension pivots, a wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheels.
This MTB rear shock features a lightweight DebonAir air spring that's highly tune-able and is designed to offer a coil-like consistent feel throughout its travel. As a result, it effortlessly soaks up even the smallest of knocks and bumps, while tracking the slightest changes in the terrain. RockShox has also kitted out this trail-ready model with a high-quality R damper and external rebound adjustment, so you can set it up to perfectly match your riding style as well as the trail conditions. With updated graphics that give it the look and feel that you expect from the Super Deluxe family of shocks in a straightforward package, it's also now equipped with Maxima Plush fluid that reduces friction and silences damper noise. Technologies: DebonAir: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. SAG Gradients: Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won’t find this anywhere else but RockShox. Maxima Plush Fluid: Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures.
Ready to take on any road cycling challenge, this model is packed with some of the finest Shimano technologies available to bring you an unrivalled riding experience. Precisely customise its feel thanks to its reach adjust technology which allows you to adjust it to suit your hand size, riding style and individual rider preferences. Furthermore, its Servo Wave Action technology delivers fast braking efficiency between your pads and rotor, so you can enjoy more rapid braking power and control. Taking its lightweight and sleek design up a notch, Shimano has also installed an anti-slip lever which gives you superior grip and control in any weather conditions. Smooth and reliable, this is a perfect example for taking your rough road cycling further than ever before across mixed terrain conditions. Technologies: Servo Wave Action: When you pull a Servo Wave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control. Reach Adjust: Its brake lever is equipped with a reach adjust mechanism. The distance from handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.
Shimano's Ultegra FC-R8100 crank maintains the same quick, precise front shifting and efficient power transfer that Shimano riders have grown accustomed to, but with even more crank arm length options. Spanning 160 to 175 mm in length, Ultegra cranks now cater to smaller riders, triathletes, and cyclists curious about shorter crank arms. An integral part of Shimano's new 12-Speed road lineup, the FC-R8100 crank builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-Speed shifting, the Ultegra crank is now offered in lengths from 160 to 175 mm, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanical requirements. Hollowglide Chainring Technology Hollow technology on the outer chainring. The Hollowglide construction ensures high rigidity while its hollow structure cuts down on weight yet maintains strength. This provides better power transfer and quicker and more precise front shifting performance. Hollowtech II Forged Crank Arms A lightweight crankset not only reduces the bike’s weight but decreases rotating mass to aid in acceleration. The challenge is to reduce the weight of the crank without reducing its strength and rigidity. Shimano's advanced forging technology has solved the problem through the HOLLOWTECH crank. Just like high-quality frame tubing, a hollow crank arm can provide amazing strength and rigidity at very lightweight. Optimised Balance of Stiffness, Strength and Weight The concept of Hollowtech II technology is focused on producing a superior crankset that will maximize a rider’s power transfer. The rigidity of the crankset ensures pedalling efficiency while its low weight, a key element of the crankset, aids in cycling longer distances over which the rider needs to pedal more. Naturally, Shimano strove for the optimum balance between the conflicting needs of stiffness while producing a lightweight crank. The addition of Hollowtech II technology integrates the bottom bracket axle with the right crankarm for more stiffness and weight savings to achieve a high-dimensional balance. Its outboard bottom bracket bearing system provides better weight distribution and more pedalling stability, allowing for more efficient power transfer.
Among the greatest performing Dual Control Levers on the market, Ultegra R8150 Di2 offers 12-speed shifting with refined ergonomics and is exceptionally lightweight. Ultegra R8150 Di2 Dual Control Levers are the ultimate in reliable performance thanks to a Di2 electronic wired gear connection and lightweight rim brakes. Refined ergonomics and advanced materials show the racing pedigree of these levers. Shimano E-Tube E-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application. Shimano DCL Dual Control Lever DCL stands for Dual Control Lever. It has brake and shifting functions in the system and enables easy operation. Ergonomic innovation is as critical to higher standard performance as the added gearing. The shift internals borrows the robustness from Shimano's MTB technology and is so smooth and effortless that one finger shifts front and rear are possible. Indeed, shifting is the ultimate act of Shimano Total Integration and simply has to be experienced to be understood. SLR-EV Caliper Compatible SLR-EV is Shimano's SLR braking technology with a dual symmetric pivot brake caliper. The short-arm brake design employs two bearings and a roller to realize greater efficiency in the pivot area and deliver superior modulation and power for braking. Together with the BC-9000 brake cable, the latest calipers deliver 36% more braking power than Shimano's previous brake model.
Despite its smaller, lighter design, the Dura-Ace FD-R9250 brings the fastest front shifting on the market. The fastest just got faster thanks to the Dura-Ace FD-R9250. Tipping the scales under 100 grams, the new design shifts 45% quicker than Shimano's FD-R9150, already the fastest on the market. And the frontal area of the FD-R9250 is also reduced to decrease aerodynamic drag. Shimano Di2 Electronic Drivetrain Performance Thanks to its lightning-fast, accurate, and reliable shifting performance, Di2 puts riders in complete control and ensures a seamless interface between the cyclist and bike like never before. Creating and continually improving the world's best shifting is a complicated undertaking requiring constant technological advancements. From hardware to software, Shimano Di2 technology is on the cutting edge, striving to deliver the best rider experience possible now and in the future. Shimano E-Tube Compatible E-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application. HYPERGLIDE+ Optimised HYPERGLIDE+ dedicated chain technology delivers greater chain retention, improved shifting efficiency, and smoother transmission over rough terrain. Improved chain retention encourages more aggressive all-terrain riding and relieves chain-issue anxiety. Smoother drivetrain transmission and enhanced shifting performance sharpens riders’ concentration and improves acceleration. Better chain engagement cuts abrasion, reduces maintenance, and lengthens the lifespan of the chain.
The Super Record Cassette (12 Speed) from Campagnolo lives up to its title by offering a super-smooth and effortless shifting experience. The cassette fits the 11-Speed freehub and is compatible with current Campagnolo rear derailleurs for an exceptional boost to your bikes' drivetrain performance. Notice the difference while out on the road as you start to climb, where this cassette takes the hassle out of changing gear thanks to the redesigned thinner sprockets that are closer together than ever before. This new technology means you can easily shift and give your performance an extra boost without the need to change your wheels or derailleur. Made from high quality and robust construction for years of long-lasting use, when cycling through even the harshest conditions that the elements throw at you. The longer lifespan combined with the improved design that's been engineered for maximum performance makes the Super Record Cassette (12 Speed) from Campagnolo the perfect choice for upgrading your existing cassette.
It features the iconic Shimano Hollowtech II construction process making it one of the most advanced cranksets on the market today. Furthermore, it Provides the highest drivetrain efficiency, stiffness and lightest weight and it achieves this exceptional combination in a sleek and stylish 2x direct mount transmission.
Reviving the first ever Gore-Tex jacket from 1985, this Shakedry garment continues to stamp GOREWEAR’s reputation on the cycling industry, and is certain to infuse any ride with style and grace. Extremely lightweight, the outer active membrane is entirely waterproof, with water simply running off the jacket to keep you bone dry. Allowing you to shake off any moisture, this extremely breathable jacket also sports reflective details to keep you visible when the light starts to fade.
Answer the call of the water with the Föhn Explore 10'2" Stand Up Paddle Board Package. Designed for entry level paddlers with a furry friend, and suitable for use on both flat water and waves, this paddle board package includes everything you need for fuss-free water touring. Made with a durable PVC construction with reinforced inner and outer wraps, the paddle board itself boasts a robust, rigid and stable base for beginner paddlers. The EVA deckpad is also super grippy, while two branded carry handles make light work out of carrying the board to and from your chosen water landscape. Additionally, the paddle board package includes every essential you will need to get started on your paddling adventures. A removable fin ensures a smooth water glide, the paddle enhances speed and the double action pump allows easy inflation. For safety, the leash will stop the board drifting from you in the water and a handy repair kit will help prolong the board's life. Then when not in use, simply packaway in the backpack storage bag for easy transportation to and from your destination. How To Add/Remove Fin To correctly insert the included fin simply place the fin with the brass pin first into the centre of the bracket, making sure to push down. Then slide towards the back of the board and secure the front of the fin with the wingnut screw included. To remove, please reverse this action, it's best to make sure all removable parts are always cleaned off with fresh water post use to avoid any salt water damage. Care Instructions After being used in salt water all paddle boards, fins, leashes and paddles should be rinsed in fresh water and left to dry before being stored, this will ensure all parts avoid salt water damage and are kept at their best, always ready for your next adventure. When drying your paddle board, it is also best to do so deflated and in the shade where possible.
Now the little ones can join you on all of your outside adventures with Osprey's Poco Child Carrier. Crafted with durable 210D Bluesign Nylon Diamond with an adjustable Airspeed™ trampoline suspended mesh backsystem, comfort, support and safety is at the focus of the carrier. Featuring a kickstand, adjustable child harness and seat and foot stirrups, little boys and girls are easy to get in and out, and are able to sit comfortably and look out. The reverse halo design easily secures the child, while a built-in sunshade and integrated and detachable raincover will keep them protected from harmful rays and showers. For keeping essentials organised and close at hand, whether it be maps, phones, snacks or water, there are multiple pockets alongside attachment points for Osprey's Daylite daypack and toy attachment loops so even the little one's fluffy friend can join the adventure too. A removable and washable drool pad also keeps things clean, while a TUV GS safety certification means you will have peace of mind that the carrier comes fully accredited. Please note the child must be able to support their own head to use this product.
Following three years of research and development, the HUUB Anemoi 2 SUB22 Tri Suit redefines how you choose your race day clothing. The fabrics selected have been tested to ensure excellent drag reduction to make you faster and provide optimal performance. HUUB have selected the ideal fabric for the different speed ranges, meaning you have the quickest suit for your race speed and the SUB22 delivers optimal aerodynamics at speeds under 22mph. Featuring fully bonded seams to enhance comfort and aerodynamics, an Arms Neutral™ design for natural positioning and two rear aero pockets for storage. Arms Neutral™ Set Sleeves HUUB created Arms Neutral to enhance the body position most held during your activity and is a feature originally derived from their wetsuits. The cycling kit sleeves are cut in an arms forward position, to create neutral fabric tension on the body in your most held position.
The Norrona trollveggen Superlight Down850 Jacket combines premium sustainability with high performing credentials for optimum functionality in the outdoors. The main material is a high-tech, windproof, and extremely light 100% recycled Nylon face fabric, it offers great packability and durability for its weight. To achieve an excellent warmth-to-weight ratio, the jacket is filled with high-quality, RDS-certified 850 goose down. The jacket also has a slim fit with a longer cut at the back for extra protection, while the Y-shaped fit ensures good mobility. Additionally, to provide an even and lasting distribution of down, it’s tightly quilted. Perfect for use as either a mid or outer layer, making it an ideal four-season garment.
Hope’s R8 Vision LED Front Light is easily attached to your bike’s frame with a quick-bayonet fitting handlebar mount and easily connected, rugged battery pack. The light utilises eight Cree XP-G2 LEDs which spread the light output and provide a wide beam of light output allowing you to see every detail of your surroundings. The light comes with 6 different light modes, providing different power outages, with a large volume battery pack that provides up to 2 hours of battery life in full power mode.
The derailleur is designed with our Exact Actuation technology for precise, efficient shifting. We have paid special attention to the finer details, like adding a hollow titanium anchor bolt and even refining tooth geometry of the jockey wheel. The result is that the chain runs through the rear Derailleur smoother and quieter than ever before.