This superb package is one of the most eagerly anticipated groupsets of recent years. Smooth, crisp and precise shifting combined with reliable and powerful braking makes this an immensely efficient groupset. R7000 Chainset With the 105 R7000 Compact Chainset, Shimano has found the perfect balance between weight, efficiency and comfort without sacrificing stiffness or power-transfer. It has been optimised to ensure the maximum power-transfer from rider to road is achieved and thanks to modern technologies, they have achieved a wider gear pitch so it is fully compatible with standard road frames and the modern 135mm O.L.D. spaced Disc Brake frames. This crankset design pushes advancements in modern drivetrain performance and provides levels of efficiency and comfort that until now have not been achieved. Features: Material: Crank Arms, Chainrings: Aluminium; Axle: Steel Bolt Circle Diameter: 110mm Q-Factor: 146mm Bottom Bracket Standard: HollowTech II Chainring Gear Ratio: 50-34T Compatible Chain: HG-EV 11 speed / HG-X11 Drivetrain Speed: 11 speed R7000 Double Shifter Set The 11-Speed Shimano 105 R7000 Shifter Set is the evolution in Shimano mechanical drivetrain performance. Borrowing trickle-down technology from the Dura-Ace and Ultegra high-end competition shift levers, these levers provide crisp, super-smooth shifting and brake performance that feels absolutely superb to use. Re-Designed, Enhanced and Optimised The internal shifting mechanism has been re-designed and enhanced to provide smoother operation and more precise actuation when shifting between gears, even when under load. The lever features a greater reach-adjustment range with very easy access to the inner shift cables when the time comes to maintain/adjust. This new system provides a fast and easy shifting experience, which ensures that race performance is always at 100%, and as a bonus, Shimano has fine-tuned the front lever shifting curve, which makes for a much lighter front derailleur shifting compared to previous models. Features: Material: Aluminium Type: Dual Control, SLR-EV Brake System: Mechanical Drivetrain Speed: 2x11 speed Weight: 251g R7000 Front Derailleur The 11-Speed Shimano 105 R7000 Front Derailleur has an ergonomic, smooth to shift power-stroke, which provides a very natural shifting feel and lighter mechanism actuation. This derailleur features an optimised cage design so that very little adjustment is needed when using road bikes with a wider rear spacing for Disc Brakes. It also is compatible with most cable routing options on the market and comes equipped with an integrated cable tension adjustment screw for superb adjustability and convenience. Features: Material: Plate: Steel Mount: Braze-on Type: Double Compatible Chain: HG-EV 11 speed / HG-X11 Top Gear Teeth: 46-53T Total Gear Capacity: 16T Drivetrain Speed: 11 speed Weight: 95g (Please note: A band clamp is not included. Compatible band clamps are available separately.) R7000 Rear Derailleur Short Cage The Shimano 105 R7000 Rear Derailleur features Shimano Shadow technology, which not only smooths shifting performance but also stabilises chain movement and keeps the derailleur low-profile, tucked tight to the chainstay. It is capable and fully efficient at shifting across a wide gear ratio while doing so with buttery-smooth shifting performance. Rear derailleur drivetrain performance has never been as smooth, reliable and as precise as this. Features: Material: Aluminium Drivetrain Speed: 11-Speed Compatible Chain: HG-EV 11-Speed / HG-X11 Maximum Cassette Size: 11-30T Top Capacity: 35T Max Front Ratio Difference: 16T Low Sprocket: Max: 30T; Min: 25T Top Sprocket: Max 14T; Min: 11T Pulley: 11T Weight: 225g Shimano R7000 Rim Brake Calipers The 105 R7000 Brake Caliper is the latest innovation in affordable, pro-level braking performance from Shimano. Providing an exceptional linear braking curve, enabling you to precisely time your braking with more accuracy than ever before. It provides a very noticeable balance between feel, stiffness, stopping power and response; it is the most inspiring brake system to use for the aspiring podium chaser. Compatible with SLR-EV brake levers to provide optimised braking control and elegant performance. Features: Material: Aluminium Type: SLR EV Dual Pivot Reach: 51mm Maximum Tyre Size: 28c Weight: 379g Shimano R7000 Cassette The Shimano 105 R7000 Cassette provides precise 11-Speed shift ramping and is a foundation for top-level drivetrain performance. Featuring a durable, lightweight construction, which is weather and wear-resistant, it provides professional level 11-Speed drivetrain performance. Features: Material: Sprockets: Steel, Nickel Plated; Spider: Aluminium Type: HG-EV Compatible Chain: HG-EV 11 speed / HG-X11 Drivetrain Speed: 11 speed Weight: 284g (11-28T) KMC X11 11 Speed Chain This high performance 11 speed chain is specifically designed for the demands of modern road cycling. This model uses its half nickel-plated outer plates to ensure smooth and dependable performance. KMC has also developed this version for extreme durability. Features: Use: Road, Mountain Bike (MTB) Size: 1/2" x 11/128" Pin Length: 5.5mm Quick Link Included: Yes Number of Links: 120 Hi-Performance Half Nickel plated Extremely durable Weight: 266g Please Note: Shimano gear inner/outer cables and Clarks inner/outer brake cables are included, there is no need to purchase these in addition to the groupset.
The Oversized Pulley Wheel System for Shimano Dura-Ace 9200 and Ultegra 8100 with integrated stop tower for simple installation and durability. This OSPW System has handbuilt CeramicSpeed Bearings installed in each pulley and comes with a 4-year warranty as standard and a lifetime warranty when choosing coated bearings. Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimisation of the rear derailleur. The upper and lower oversized aluminium pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. For 8100 derailleurs, the cage uses the factory derailleur body washer. 9200 derailleurs will require the new included derailleur body washer. The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world. With an industry-leading design, the CeramicSpeed OSPW System is the choice of World Champions and top athletes around the world. Since its introduction in 2015, the CeramicSpeed Oversized Pulley Wheel System has been through 13 unique derailleur compatibility developments. No other pulley system has the depth of use and trust as the CeramicSpeed OSPW, which counts both Men’s and Women’s Triathlon World Champions, World Tour professional road teams, XCO professional MTB Teams, and elite athletes worldwide as its users. This OSPW System has handbuilt CeramicSpeed Bearings installed in each pulley and it comes with a four-year manufacturer's warranty as standard. Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimisation of the rear derailleur. The upper and lower oversized aluminium pulley wheels come fitted with standard CeramicSpeed Bearings. Also included in the box is a 15ml dropper bottle of CeramicSpeed Bearing Oil. Technical Data The overall power savings of the OSPW System for Shimano 9200 reach 30%-60%, or more in some cases, over a stock setup. The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market. Maintenance of CeramicSpeed OSPW Systems Regarding the maintenance of your OSPW System, it is important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil by using the lubrication points on the back cage plate, so that oil can penetrate the bearing. Do this when you lubricate your chain, if you have washed your bike or after riding in wet or muddy conditions. Please note: While there are visual similarities in the 9100 Series OSPW and 9200 Series OSPW, the spring tension settings, rotation stop tower placement, and mounting pin depth are slightly repositioned and as such the systems are not cross-compatible. Technologies: - Integrated stop tower for simple installation and durability. - Lifetime warranty on system cage. - Trusted design by World Champions and top athletes around the world. - 13/19 pulley wheel sizes. - Standard or CeramicSpeed bearings (multiple options in the selection menu). - Handbuilt CeramicSpeed bearings are installed in each pulley.
Designed in collaboration with Dallara, this versatile saddle is engineered for the best balance of lightness, comfort and performance wherever your next ride takes you. It features a high-quality carbon design that includes a full carbon cover construction as well as hi-tech carbon rails. This combination ensures maximum stiffness and strength while also keeping its overall weight impressively low with the S3 option weighing only 90g and the L3 option weighing 100g. Multi-Discipline Saddle with Superflow Technology Whether you're clocking up the miles on an endurance ride, competing in a road racing event or exploring countryside back roads on your gravel bike, this saddle is developed for performance. Coming kitted out with Superflow technology, it uses its special central relief channel that runs down its middle section to relieve any pressure or fatigue from around your sit bones. As a result, you'll benefit from increased comfort and support, making it perfect for going the extra distance. Another highlight is this model's neutral shape that's ideal for riders with dynamic riding positions and those who like a more upright riding experience. Coming complete with a sleek, eye-catching finish, this is a great choice of upgrade for riding with speed, comfort and style. Technologies: Hi-Tech Carbon Rails: High modules carbon fibre weave, ø7x9mm. Superflow Channel: The SuperFlow technology drastically reduces all physical limitations caused by prolonged pressure in the perineal area. Neutral Shape: Neutral shape is recommended for individuals with both Anterior (Dynamic Rider) and Posterior (Static Rider) Pelvic Tilt. Manufacturer's Part Numbers: 041A922WCA001 Black L3 041A522WCA001 Black S3
Built with a 126mm drop and 75mm reach, there is plenty of comfort to be found on this carbon monocoque construction, as you swoop and sprint for silverware. With a grooved underside for discreet cable routing, a UCI compliant aero top section and mounting holes for accessories such as mid-ride analysis devices or GPS screens, it is well suited to today's athletes, while retaining the sensibilities of a tried and tested look and feel. With a UD carbon finish adding striking looks to proceedings and a curved stem clamp to minimise stress on the steerer, this is a fantastically formed handlebar from Ritchey.
Featuring a lightweight and robust 6061 T-6 aluminium frame and fork, this kids bike's super stable geometry, and 2.6" plus sized tyres giving the bike ample suspension without the need for a heavy suspension fork. The 24+ is the ideal package for any wannabe trail rider. Shimano 7-Speed Drivetrain and Tektro Hydraulic Disc Brakes Fitted with a Shimano Altus 7 Speed drivetrain with Rapidfire shifter and Tektro M276 hydraulic disc brakes, this bike has all the capabilities of tacking whatever the rider can throw at it. The 24+ also features an aluminium bar, stem and seatpost kit, helping to keep the overall weight of the bike as low as possible. Plus Sized Tyres for More Grip and Control The Vee Crown Gem 24 x 2.6" tyres are a fantastic way to experience trail riding for the first time. Weighing significantly less than suspension forks, and the ability to adjust the ride with pressure changes, they also add grip and stability to the bike making the riding experience more enjoyable. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
This stylish freestyle BMX features a reliable hi-ten steel frame with a MID bottom bracket and gyro rotor tabs. Plus, it's armed with quality GT components to ensure you are always in control and are pushing your riding ability to the next level. Designed for Speed, Agility and Style This Performer model is designed and engineered for thrill-seekers aiming to confidently push your ability and style to new heights. Perfect for advancing and perfecting your skills, this stylish 20"-wheel freestyle BMX is equipped with a GT hi-tensile steel frame, GT Power series Chromoly (CrMo) three-piece cranks and a GT Freestyle two-piece handlebar, giving top-end features that any rider of any ability level can appreciate. GT FS Design Tapered Forks and GT Finishing Kit With a GT FS Design fork bearing the brunt of every landing, this version's dependable 20" wheels with GT LP-5 tyres also assist your traction and grip over any terrain you ride. Plus, this stylish BMX is kitted out with a superb GT finishing kit that ensures you can hit any feature with complete commitment and composure. Please note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).
Equipped with an aluminium flip-flop rear hub, setting your bike up with the Mavic Ellipse track bike wheels takes seconds thanks to their special design, while the 30mm rim profile is deep enough to ensure a dynamic roll when your run gets going. Kitted out with 20 straightpull spokes on each wheel, this Ellipse wheelset has been developed alongside some of the World's top racers at the World Cycling Centre in Aigle, guaranteeing a premium build and elite performance from start to finish. Please Note: As these wheels are for track bike use, they do not have a braking surface or disc brake rotor mounts.
Originally perfected for Pro Tour mechanics, the PRS 22.2 Team Issue Repair Stand helps to mount bikes that are in need of essential maintenance. The solid rotation system allows you to approach your pride and joy from all angles and the fact it can function with any modern axle standard (including quick release and every size of thru-angle) ensures there is no need for adaptors. Extremely sturdy and sporting a solid tripod base, this Team Issue Repair Stand is the mechanics ultimate tool for applying that all-important fix to the bike. Should space be an issue, it also folds compactly.
Designed for a feeling of power in the water, our Powerskin Carbon Core FX open-back suit for women takes compression to a new level. This racing swimsuit is cut from Carbon Cage fabric that works horizontally and vertically for long-lasting muscle compression and a locked-in feel. At the back twin-taping along the legs has a lifting effect on the body, helping it to stay high and horizontal in the water. The internal taping and lining intensify support and core stability. To add flexibility, we designed the lining with a slim opening under the chest. Care Instructions Rinse immediately after use, in non-chlorinated water. Do not leave the wet swimsuit in a bag or other container for a long time. Do not expose the wet swimsuit in a bag or other container to direct sunlight. Wash with detergents suitable for delicate clothes, Air-dry away from heat sources. Hand wash only. Do not dry clean. Do not bleach. Do not machine dry. Do not iron.
Whether you're riding with your local road club or exploring new routes on your own, these high-quality carbon crank arms are engineered for performance. They feature a hollow Exogram carbon construction, which gives them a fantastic balance of strength, elegance and an overall low weight. Coming equipped with industry-leading technology such as SRAM's DUB bottom bracket spindle interface, these ensure stiffer pedalling performance with better sealing than ever before without having to make compromises to fit all frames. Designed for the most discerning pros. And riders who set it and neglect it. DUB is compatible with all major bottom bracket standards. These crank arms can also be paired with any SRAM AXS spider or integrated chainring, with or without power. Please note: Bottom brackets are available separately. Exogram Carbon Crank Arms SRAM's Hollow Carbon Construction starts in the crank arms, maximising the stiffness to weight ratio. DUB Technology The relationship between bottom bracket spindle and bearing is the core of DUB technology. It’s where stiffness meets durability. SRAM took it a step beyond conventional thinking and made everything simpler—better integrating the relationship between chainring, crank, spindle and bottom bracket. It’s this approach to developing a complete system that equals better drivetrain performance. Technologies: - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings. - DUB technology. - Hollow Exogram carbon arms. Manufacturer's Part Numbers: CAA8265004 Black 175mm CAA8265002 Black 170mm
Designed for day tourers and confident SUP users, the Fohn Adventure 10'6" Stand Up Paddle Board Package is ideal for a variety of paddling adventures on both flat water and waves. Made with a double layer construction with an inner and outer tarpaulin alongside a reinforced double PVC coating on the side wraps, the paddle board itself boasts a rigid, stable and durable base for paddling. The EVA deckpad is also super grippy, while branded carry handles make light work out of carrying the board to and from your chosen water. For storage, an integrated bungee cord provides a secure space for gear overflow, water bottles, snacks and more. Additionally, the paddle board package includes every essential you will need to get the most out of your paddling experience. A removable fin ensures a smooth water glide, the paddle enhances speed and the two-way pump allows easy inflation. For safety, the coiled leash will stop the board drifting from you in the water and a handy repair kit will help prolong the board's life. Then when not in use, simply packaway in the backpack storage bag for easy transportation to and from your destination. How To Add/Remove Fin To correctly insert the included fin simply place the fin with the brass pin first into the centre of the bracket, making sure to push down. Then slide towards the back of the board and secure the front of the fin with the wingnut screw included . To remove, please reverse this action, it's best to make sure all removable parts are always cleaned off with fresh water post use to avoid any salt water damage. Care Instructions After being used in salt water all paddle boards, fins, leashes and paddles should be rinsed in fresh water and left to dry before being stored. This will ensure all parts avoid salt water damage and are kept at their best, always ready for your next adventure. When drying your paddle board, it is also best to do so deflated and in the shade where possible.
Boasting a high-quality Maxtal aluminium rim build, this E-MTB wheelset is designed to be super-strong to handle the increased speed and torque that's associated with electric bike motors. Mavic has also equipped this model with a welded rim for extra strength, durability and perfect sealing, while its Pinch Flat Protection reduces the risk of punctures. As a result, it's a reliable choice of upgrade for a wide range of electric mountain bike riding disciplines. Pinch Flat Protection Technology The name E-Deemax has become a reference for E-bike riders, this updated E-Deemax 30 lives up to its name with many of the same features and technologies as a higher range model, but at a far more attainable price. One of the key factors is Mavic's Pinch Flat Protection technology, a rim design with a wider contact surface at the top of the sidewall, which significantly reduces the risk of tyre cuts and punctures. The rim is welded for added reliability and features a 30mm internal width with a Tubeless Ready compatibility to allow you to run lower tyre pressure for better traction and control. UST Tubeless Ready E-MTB Wheelset Featuring Mavic's ready-to-ride tubeless-ready system, this wheelset is designed to offer greater traction and control for modern E-MTB riding. When used tubeless with tubeless tape, it delivers more stability and less risk of flats. The UST concept improves traction, control and comfort whilst reducing inertia and punctures. Instant Drive 360 Freewheel Technology As with all of Mavic's E-Deemax wheelsets, this updated option is lab and field validated for a max total weight of 180Kg. The brand's Instant Drive 360 freewheel with a double ratchet system equips the rear hub and provides fast engagement and top-level reliability. Super light and fast to engage with only 9°, this freewheel system's large contactless rubber seal provides low friction super versatility. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies (please choose the option to match your setup from the menu). The E-Deemax 30 is available with 6-bolt or Centre Lock brake rotor mounts in 29” only and is compatible with a 15x110mm front axle and 12x148mm rear. The wheelset is delivered with valves, replacement spokes and accessories. Please note: - Micro Spline freehub option has Centre Lock disc brake mounts. - Shimano freehub option has 6-bolt disc brake mounts. - SRAM XD freehub option has 6-bolt disc brake mounts. Additional Item Top Features: Rims Drilling: Traditional E-Bike specific rim profile Tyre: UST Tubeless and Tubetype ETRTO Size 29": 622x30TC Pinch Flat Protection sidewall (minimises the risk of tyre cuts and punctures) Asymmetrical rim design SUP Spokes Shape: Straight pull, flat Count: 28 front and rear Lacing: Front and rear crossed 3 Hubs Instant Drive 36 QRM Auto Freehub: Multiple options available to select from the menu Intended Use ASTM CATEGORY 5: Gravity riding focused on the descent Recommended tyre sizes: 60mm to 76mm (2.35" to 3.0") For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg, E-bike included Delivered With UST valve and accessories Pre-installed tubeless rim tape Replacement spokes (2 with the front wheel and 4 with the rear) Technologies: Maxtal: Light and strong Exclusive to Mavic, this specific aluminum alloy offers a higher strength to weight ratio than conventional 6106 alloy. Instant Drive 360 Freewheel Technology: The new Instant Drive 360 freewheel system is super light and fast to engage with only 9°. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile. UST Tubeless Technology: Traction and control Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats. Pinch Flat Protection Sidewall (minimises the risk of tyre cuts and punctures): 20% less risk of puncture with PFP. An e-bike specific innovation to significantly reduce the risk of tire cuts and punctures. QRM Auto Bearing Preload Technology: Qualité de Roulements Mavic Auto Our latest innovation. Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run. Manufacturer's Part Numbers: P1577115 Black 29" Micro Spline Centre Lock P1639110 Black 29" Shimano 6-bolt P1576110 Black 29" SRAM XD 6-bolt
The shift paddles now feature a more defined "click" for confidence in shifting and to prevent mis-shifts, also the shift buttons have been extended in length meaning they are easier to reach from the drops and hoods. E-Tube compatibility means that the function of the shift paddles can be customised to suit the rider. The 9170 shifters now include Synchro-shift technology that automatically moves the rear derailleur when the front ring is changed or moves the front chainring with the rear shifts to optimise chainline and drivetrain efficiency.
Featuring a strong 6061-T6 aluminium frame, hydraulic disc brakes and Shimano Nexus 3 speed internal hub gearing, this hybrid city bike boasts a no-nonsense design that's versatile to its core. This makes it fully equipped for commuting around the city, leisure trips and everything in between. Delivering simplicity, style and performance, this ride is a great choice for your urban adventures. Aluminium Frame and Hi-Ten Steel Fork The Vitus Mach-1 is a go-getter. It’s the bike that simplifies how you move around, making it easier to stay active, fit and in love with life on two wheels. Vitus has equipped this model with a durable aluminium frame and a high-tensile (hi-ten) steel fork for an excellent balance of stiffness and strength on your journey. For nipping around town and the admin of daily life, the Mach-1 is a robust and ready hybrid that’s well equipped for the full-on schedule of busy living. Hydraulic Disc Brakes and Internal Hub Gearing The Vitus Shining 650b rims and Vee Tyre Co. Speedster tyres are brisk off the mark and will absorb the lumps and bumps of roads, cyclepaths or tracks. It's hydraulic disc brakes keep the stopping power high for negotiating traffic or wet conditions and this model uses internal hub gearing so it’s the perfect low-maintenance workhorse. Not one to shy away from the nitty-gritty of year round riding and everyday errands, the Vitus Mach 1 Three (Nexus) excels when all you need is a simple, no-fuss bike for getting from A to B. Features: Frame: Mach 1 Aluminium, 6061-T6 Aluminium, Mud Guard Mounts, Rack Mounts, QR Rear Shock: N/A Fork: Mach 1 Steel, Hi-Ten Steel, 1 1/8" Steerer, Mudguard Mounts, QR Use: City - Utility Headset: Neco, Loose Ball Bearings, OD48, 1 1/8” - 44 - 50 - 30, Height 23.6mm Handlebar: Vitus 6061 Aluminium Flat Bar, 6 Degree Backsweep, 660mm Width, Bar Bore 31.8mm Stem: Vitus 6061 Aluminium, 90mm Length, Bar Bore 31.8mm, +/- 15 Degree Grip: Vitus MTB, With Plastic Lock Ring Front Rim: Vitus Shining, DB-X25, 650b, 32 Hole Rear Rim: Vitus Shining, DB-X25, 650b, 32 Hole Front Hub: Shimano, HB-TX505, 32 Hole, QR, Centre Lock Rear Hub: Shimano Nexus 3 Speed, Internal Hub Gear, 32 Hole, QR, Centre Lock Front Tyre: Vee Tyre Co. Speedster, 27.5" x 1.95", MPC Compound Rear Tyre: Vee Tyre Co. Speedster, 27.5" x 1.95", MPC Compound Spokes: 14G Stainless Steel, 16mm Nipple Chain: KMC B1 Wide, 1/2" x 1/8" Single Speed Crankset: Shun, 38T, 170mm Crank Length Bottom Bracket: Square Taper, BSA Threaded, 68mm, English Front Brake Set: Shimano Deore MT401 or Clarks M4, Post Mount, Shimano: Two Piston Caliper, Clarks: Four Piston Caliper Rear Brake Set: Shimano Deore MT401 or Clarks M4, Post Mount, Shimano: Two Piston Caliper, Clarks: Four Piston Caliper Rotors: Shimano SM-RT30 or Brakco DR-02, 160mm Front & Rear, 6 Bolt Hub Fitment Front Derailleur: N/A Rear Derailleur: Shimano Nexus Internal Hub Gear, 3 Speed Left Shifter: N/A Right Shifter: Shimano Nexus Revo, Grip Shift, 3 Speed Freewheel: Shimano, 18T Saddle: Vitus, Steel Rail Seat Post: Vitus 6061 Aluminium, 27.2mm x 400mm Seat Screw: Aluminium 31.8mm, Stainless Steel Bolt Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Riding a Fixie Inc. is more of a philosophy than cycling. Eight gears, the rider against the road: that's what makes the Floater Race 8S. The decisive factor is an unobtrusive and trendy design. Many riders customise accessories and add-on parts to make their bike truly unique. The Floater Race with a classic racing handlebar is perfect for riders who prefer a real racing bike position. The Shimano Sora 8-speed derailleur offers you optimal gearing for your daily traffic light sprints. Convince yourself and discover the Fixie-Inc fever for yourself. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Cedar S Hybrid features a durable aluminium frame equipped with a smooth-shifting Shimano Acera 3x7-Speed groupset, powerful ProMax V-brakes and it rolls upon fast-spinning alloy wheels wrapped in high-grip Schwalbe CX Comp tyres. Serious has also fitted this practical and versatile bike with mudguards and front and rear lights. The Serious Cedar S Hybrid convincingly combines the nimble character of a fitness bike with the everyday suitability of a modern and light city bike. And all this at a surprisingly low price. The lightweight aluminium frame convinces with its straightforward design and consistently high-quality workmanship. The seating position meets the golden mean between a comfortable upright posture, a good overview and a shot of sporty directness. The intuitively operable Shimano Acera 21-speed derailleur system, as well as reliable V-brake brakes on the front and rear wheels, fit in perfectly. The Serious Cedar Hybrid rolls quickly and comfortably on slightly profiled Schwalbe CX Comp tyres and with this equipment is just as well prepared for everyday use on paved roads as for pleasure tours or fast laps over country lanes and the like. With the Cedar Hybrid, Serious has once again proven his eye for a harmonious and unobtrusive overall package. Just get on and drive. Additional Features: Front Lights: AXA Blueline 30 Switch Rear Lights: Buechel FL12 Mudguards: SKS PET A48 Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Cedar S Hybrid Trapeze features a lightweight and durable trapeze aluminium frame that has a lowered top tube for easy access on and off the bike. It is equipped with a smooth-shifting Shimano Acera 3x7-Speed groupset, powerful ProMax V-brakes and it rolls upon fast-spinning alloy wheels wrapped in high-grip Schwalbe CX Comp tyres. Serious has also fitted this practical and versatile bike with mudguards and front and rear lights. The Serious Cedar S Hybrid convincingly combines the nimble character of a fitness bike with the everyday suitability of a modern and light city bike. And all this at a surprisingly low price. The lightweight aluminium frame convinces with its straightforward design and consistently high-quality workmanship. The seating position meets the golden mean between a comfortable upright posture, a good overview and a shot of sporty directness. The intuitively operable Shimano Acera 21-speed derailleur system, as well as reliable V-brake brakes on the front and rear wheels, fit in perfectly. The Serious Cedar Hybrid rolls quickly and comfortably on slightly profiled Schwalbe CX Comp tyres and with this equipment is just as well prepared for everyday use on paved roads as for pleasure tours or fast laps over country lanes and the like. With the Cedar Hybrid, Serious has once again proven his eye for a harmonious and unobtrusive overall package. Just get on and ride. Additional Features: Pedals: SP-610 Front Lights: Axa Blueline 30 Switch Rear Lights: Buechel FL12 Mudguards: SKS PET A48 Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Cedar Street Trapeze with its trapeze frame design means that it has a lowered top tube for easy transitions as you step on and off the bike. Ideal for towpath rides, off-road tracks and inner-city errands, it is engineered and equipped to be practical, stylish and fun. Serious also fitted its durable and lightweight aluminium frame with a Shimano Acera 3x7-Speed groupset, powerful ProMax V-Brakes and stable double-wall aluminium rims wrapped in high-grip Schwalbe Spicer tyres. The Cedar Street is the perfect allrounder for riders who are looking for a sporty bike that is flexible enough to handle a variety of urban challenges. It makes no difference whether you ride asphalt, gravel or paved roads. The elaborately crafted frame made of lightweight aluminium is characteristic of the Cedar Street focus on simple sportiness. Proven Shimano drivetrain components with Shimano Acera gears, a Shimano front derailleur and Shimano cassette in combination with the Shimano gear levers ensure lasting riding pleasure. Biting V-brakes and a sensitively responsive SR Suntour suspension fork with 60 mm travel, which provides safety and comfort on rough terrain, are further advantages of the Serious Cedar Street. The picture is rounded off by stable wheels with hollow chamber rims and a maintenance-free sealed cartridge bottom bracket. With Schwalbe's high-quality tyres, you can roll quickly and safely on city streets in various conditions. The Cedar Street is an agile cross-racer for everyday use, touring and training with all-weather equipment and lighting that is ideal for all-season riding conditions. Additional Features: Pedals: Xerama SP-610, aluminium, black Front Light: AXA Blueline 30 Switch Rear Light: Buechel FL12 on mudguard Mudguards: SKS Zeta 2 Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Ideal for towpath rides, off-road tracks and inner-city errands, the Cedar Street is engineered and equipped to be practical, stylish and fun. Serious fitted its durable and lightweight aluminium frame with a Shimano Acera 3x7-Speed groupset, powerful ProMax V-Brakes and stable double-wall aluminium rims wrapped in high-grip Schwalbe Spicer tyres. The Cedar Street is the perfect allrounder for riders who are looking for a sporty bike that is flexible enough to handle a variety of urban challenges. It makes no difference whether you ride asphalt, gravel or paved roads. The elaborately crafted frame made of lightweight aluminium is characteristic of the Cedar Street focus on simple sportiness. Proven Shimano drivetrain components with Shimano Acera gears, a Shimano front derailleur and a Shimano cassette in combination with the Shimano gear levers ensure lasting riding pleasure. Biting V-brakes and a sensitively responsive SR Suntour suspension fork with 60 mm travel, which provides safety and comfort on rough terrain, are further advantages of Serious Cedar Street. The picture is rounded off by stable wheels with hollow chamber rims and a maintenance-free sealed cartridge bottom bracket. With Schwalbe's high-quality tyres, you can roll quickly and safely on city streets in various conditions. The Cedar Street is an agile cross-racer for everyday use, touring and training with all-weather equipment and lighting that is ideal for all-season riding conditions. Additional Features: Pedals: Xerama SP-610, aluminium, black Front Light: AXA Blueline 30 Switch Rear Light: Buechel FL12 on mudguard Mudguards: SKS Zeta 2 Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Pull on the Tri-Sixty Cycling Shoes and you'll have the immediate comfort of Sidi's TechPro Microfibre upper. An eco-friendly leatherette it provides a supple fit but with excellent durability and support to meet the demands of hard pedalling. You'll also benefit from copious vent holes and mesh zones, boosting breathability and ventilation, letting your feet dry off quickly after the swim and adding comfort as you get stuck into your bike leg. An anti-mould treatment also helps fight the build-up of bacteria, leaving your feet fresh, kilometre after kilometre. C-Boost SRS Carbon Sole When you're on the bike leg it's the C-Boost SRS Carbon Sole that will get you up to speed with optimal efficiency. Designed to deliver uncompromising performance, this carbon sole has a carefully engineered shape and a carbon lay-up that delivers direct power transfer, leading to lightning-quick acceleration and rival-dropping pedal strokes. Cleat extension has been increased ± 5 mm to allow for more cleat adjustment while the millimetre scale allows you to get the right position every time you replace your cleats. SRS (Sole Replacement System) The SRS sole features replaceable inserts in Nylon and TPU. These inserts provide protection for the carbon sole in the areas most prone to wear and damage and boost durability and grip when you're walking. Ventilation holes are fully integrated too, ensuring excellent air circulation during every pedal stroke. Tecno-4 closure system The Tecno-4 dial adjustment offers a superbly precise adjustment of the fit, even on the go. Smooth running wire laces pull evenly to apply just the right amount of pressure. The release of the tension has been improved for faster closure and release too. Like all Sidi shoes, this new Tecno-4 is replaceable, allowing your shoes to last and last. Cleat Guidance These Triathlon Shoes are compatible with road bike pedal systems that use cleats with 3-bolt standards, such as: Look Delta and Keo, Shimano SPD-SL, Speedplay Light Action, Zero, X-Series (via 3-hole adapter plate), Campagnolo Pro-Fit, Mavic Zxellium, Time Iclic/Xpresso and Time Impact