This kit consists of the cable guide parts found under the BB of a Vitus Venon. These parts allow correct routing of your rear cables and hoses and front derailleur cable.
This kit includes a single cable guide and bolt that act as direct replacements for the guides found on Vitus frames bikes.
Genuine replacement Nukeproof frame spare parts.
Constructed in 2 layers, combining the firmness of hard plastic PP with the softness of an A20 Vexk rubber, the grips offer suitable comfort and durability. The half waffle contours to your hand and with closed ends there's no need to worry about bar end plugs. The one piece construction incorporates a plastic clamp and alloy fittings to securely mount the grips.
Constructed in 2 layers, combining the firmness of hard plastic PP with the softness of an A25 Vexk rubber, the grips offer suitable comfort and durability. The knurled finish maintains grip in the wet and dry with closed ends there's no need to worry about bar end plugs. The one piece construction incorporates a plastic clamp and alloy fittings to securely mount the grips.
Constructed in 2 layers, combining the firmness of hard plastic PP with the softness of an A25 Vexk rubber, the grips offer suitable comfort and durability. The mushroom ribs contour to your hand and with closed ends there's no need to worry about bar end plugs. The one piece construction incorporates a plastic clamp and alloy fittings to securely mount the grips.
The LifeLine TwinHead Allen Key is available in multiple sizes from 2 - 8mm and features a storage hole for organisation making this an essential tool for any mechanic, home or professional.
This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
The lever is ergonomically shaped and the mechanism uses a brass bush to make sure it has a smooth and consistent action which will last. Tech Tip: To confirm what size you need, remove your existing clamp from the frame and measure the diameter across the top of the hole that the seatpost fit in to. Alternatively, sometimes your bike's seatpost clamp size is stamped on the existing seatpost clamp.
This bike seatpost clamp is available in 28.6, 31.8, 34.9mm or 36.6mm sizes and comes in durable anodised black of silver. Please Note: The measurements listed in the sizing options are the internal measurement of each clamp. Each clamp is designed to clamp around to your bike's frame, so allow a few millimetres difference between your saddle seatpost and the clamp size you need. We recommend that you either measure your bike frame's seatube or check for any sizing information that may be stamped on your old clamp.
With a lightweight chassis and a compact footprint, the LifeLine Pioneer Mini pump fits in your bag or pannier with so little bulk you’ll barely notice it’s there until you need it. Perfect for long trips when weight and space are at a premium. The head is switchable to accommodate Presta and Schrader valve types and the barrel is rated up to 100PSI. A bottle cage mount bracket is included, simply install it onto the bottle cage mounts and never leave the house without it.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
Tubeless tyre systems are lighter than inner tube setups, they seal punctures instantly and allow you to run lower pressures without the risk of pinch-flat punctures; so you can ride faster for and spend less time fixing punctures at the side of the roads and trails. Quick, Easy and Mess-Free LifeLine Tubeless Tyre Sealant makes installing tubeless tyres quick, easy and mess-free. The 80ml and 150ml applicator packs are supplied with built-in Presta valve core extractors and specially shaped nozzles to deliver the sealant directly through the valve, eliminating messy spills. No scoops or syringes required. The formula is non-toxic, it includes Dupont kevlar additive to rapidly seal punctures and tears up to 5mm. It is compatible with all tubeless tyre systems. 80ml Applicator Pack includes enough sealant for a single road bike tyre (700c 25-32mm width). 150ml Applicator Pack includes enough sealant for a single MTB tyre (29” 2-4” width). The applicator packs can then be refilled with the 500ml or 950ml pack for subsequent tyres. Easy Delivery Of Tubeless Sealant Simply mount the tyre to the rim, remove the core from the valve, deliver the sealant through the valve and inflate the tyre with the LifeLine Airblast Tubeless Track pump or similar tubeless pump. Then rotate the wheel and lay it on either side to allow the sealant to cover the entire inner surface of the tyre. Pro Tip: Before adding the sealant, use a tubeless track pump to blast the tyre onto the wheel and seat the beads securely onto the rim. This way, there is no chance of any sealant drops or spills.
The Race Number Holder features an aluminium clamp, which fits neatly to a seatpost. Coming with Rubber O-ring that will fit securely around the seatpost, as well as bolts for fast and easy installation, LifeLine's Race Number Holder also features additional rubber protection for extra grip and to avoid damage to your seatpost. Perfect for the racing cyclist and the gran fondo goer.
Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
LifeLine inner tubes are made of high-quality butyl rubber and air leakage tested to ensure excellent reliability. Sizes Available: 26" x 2.2" - 2.5" Presta 48mm; ETRTO: 55/64-559 Weight: (+/- 10%) 26" x 2.2" - 2.5" Presta 48mm: 309±15g
This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.
This thicker than normal tube walls combat pinch-flats effectively without much on an increase in weight. These tubes have also been rigorously tested for reliability and durability to ensure nothing slows you down. Sizes Available: 27.5" x 2.2"- 2.5" Presta 48mm; ETRTO: 55/64-584 Weight: (+/- 10%) 27.5" x 2.2"- 2.5" Presta 48mm: 317±16g