The SunRace CN10A 10-speed chain is built around strong CrMo plates for maximum performance and stability. Weighing only 266 grams its chromed pin design delivers superb plate retention strength and shifting efficiency.
Securely place vital ride info where you need it for triathlon or time trials with Zipp QuickView TT Computer Mount, an uncomplicated computer mount for aero-bar extensions that is easy to install, lightweight and above all vibration and slip free. The 22.2mm industry standard quarter-twist mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. Comes with single Torx T25 bolt, flexible mounting clamp and one quarter twist mount.
The Granite Design Valve comes with the Juicy Nipple Valve Cap & Core Removal Tool. The valves are black and are 45mm in length, you get to choose the colour of the valve caps. The valve cap is ideal to top up sealant anytime, anywhere.Colour: Black, Red, Blue, Green, Orange, Pink, GoldWeight: 10g (caps with 45mm valves in pair)
Never be caught short again when doing a bike build and you have a a gear cable tensioned in one hand to find your Hex key on the bench just out of arms reach with the Park Tool 104 Work Tray. Fits all Park Tool repair stands except PRS-2OS, PRS-3OS, PRS-4OS,and PRS-15.
This Park Tool AV1C Axle Vice tool holds the axle so it will not turn while work is done on the hub. It has two different diameter receptacles so it will work on front and rear axles. It is simple to use - just insert the axle into the proper diameter opening and tighten the bench vice. The jaws will open automatically when the vice is opened.
The Park Tool CWP7C Crank Wrench and Puller includes two rotating tips (11.3mm and 16.3mm) and built in wrench flats allowing the tool to remove cranks using a square taper, Octalink, ISIS Drive, Power Drive or Power Spline bottom bracket interface.
USE s Aerobar Armrest Pads are made of neoprene for a comfortable fit. The pads are compatible with R1, TULA, TR2 and Boost bars.
The XSories Silicone Case for the Go Pro Hero HD Camera is available in a choice of colours and is an essential item for your Hero HD Camera - not only does it keep your camera in top condition, but also looks the part. The snug fit gives a neat finish and will not interfere with adjustments or controls. Camera, stand and mounting not included.
Punctures suck. Tubeless setups provides some salvation from puncture induced misery, but even they aren't infallible. This is where tubeless plugs come in, and Blackburn's Tubeless Plug Kit is one of the best, so you can be fully prepared to repair your tubeless tyre wherever you are.Combined tyre reamer and insertion tool with storage tube/handleIncludes 10 tyre plugs, storage case and strapThis compact kit has all you'll need to repair a tubeless tyre. With 10 plugs and an easy to use insertion tool, you'll be back on the trail in no time. The insertion tool also doubles as a tyre reamer to keep things simple and compact. This is a great compact kit to throw in your bag and forget about until you need it, or if you want to keep it close to hand, why not use the included strap to store it on the bike Strap it to your seatpost, top tube, down tube, where ever you want!
Rhino Goo add to their impressive product range with a dual purpose cleaner and degreaser for the cycle market. Safe and very cost effective, This dual purpose product is 100% safe on all frames and components with one bottle making up 4 litres of cleaner to degrease your chain or clean your bike making this product great value for money.Dual Purpose Cleaner & DegreaserChain DegreaserBike CleanerOne Concentrated Bottle Makes 4L Of Cleaner
Never mind the punctures, here s the new Granite Punk CNC CO2 Inflator! The Punk CO2 Inflator is a tiny but mighty stashable tool that ll inflate your tyre in no time at all. It works with 16g and 25g O2 canisters and weighs just 25g so it won t weigh you down. When anarchy strikes and your tyre goes flat, just grab the Punk and you ll be kicking out the jams again on the trails in no time. The Punk works in harmony with the Granite RockBand, allowing you to carry it with a tyre lever, multi-tool and tube on your frame. Sleeve Size: Small / Large (For 16g and 25g CO2 canister, respectively)Weight: Small - 24g / Large - 25gColour: Black
The Granite Design Valve comes with the Juicy Nipple Valve Cap & Core Removal Tool. The valves are black and are 45mm in length, you get to choose the colour of the valve caps. The valve cap is ideal to top up sealant anytime, anywhere.Colour: Black, Red, Blue, Green, Orange, Pink, GoldWeight: 10g (caps with 45mm valves in pair)
The Granite Design Valve comes with the Juicy Nipple Valve Cap & Core Removal Tool. The valves are black and are 45mm in length, you get to choose the colour of the valve caps. The valve cap is ideal to top up sealant anytime, anywhere.Colour: Black, Red, Blue, Green, Orange, Pink, GoldWeight: 10g (caps with 45mm valves in pair)
The PRO Race Comfort Bar Tape is a high performance super grippy PU bar tape with smart silicone backing which leaves no residue on the handlebars making fitting and replacing easier than ever.Special PU construction keeps the tape lightweight, comfortable, hard wearing and grippy in all weather conditionsIncludes finishing tape and bar plugs
Feel the bars like never before with the Fox Clothing Flexair Gloves. The Flexair Gloves are a minimalist glove with an exceptional fit and lightweight feel. The stretch mesh finger gussets (the fabric between your fingers) increases flexibility as well as helps channel air through the glove for superior comfort. The Flexair glove also features a conductive thread on the thumb and index finger so you can use your phone without removing your gloves.Minimalistic design for optimal comfortTruFeel internal texture for heightened feel and control of leversStretch mesh finger gussets increase airflow and dexteritySingle layer palm Touchscreen compatible95% Nylon / 5% SpandexSize Chart:
The Swissstop RX Plus replacement brake pads will enhance the performance of any cantilever brake with more feel and better braking both in the dry and especially in the wet. Like all pads in the Swissstop range the RX Plus pads have a silent operation and also has a complete absence of abrasive materials which damage rims.Green GHP II: High performance compound for aluminium rims. Excellent in the dry and unbeatable in the rain. Extremely low pad and rim wear.Original Black: Suitable for less aggressive riding, very good in dry and wet conditions. Specially recommended for rims made of softer alloy material.Supplied as 4 pad inserts for 2 complete brakes
Sometimes it's the simplest ideas that are the best; RRP's Neoguard replaces that bit of inner tube you had cable-tied to the fork, providing maximum coverage for your eyes and face against mud flicked off the front wheel.Made from thick neoprene to allow for stretching and compression during suspension travel, it attaches to the fork crown and brace using the integrated velcro straps, making it easy to install and remove when required without risking damage to the fork. X-Small: 80-130mm TravelSmall: 130-160mm TravelMedium: 160-200mm TravelLarge: 200mm + Travel (Dual Crown)
Sometimes it's the simplest ideas that are the best; RRP's Neoguard replaces that bit of inner tube you had cable-tied to the fork, providing maximum coverage for your eyes and face against mud flicked off the front wheel.Made from thick neoprene to allow for stretching and compression during suspension travel, it attaches to the fork crown and brace using the integrated velcro straps, making it easy to install and remove when required without risking damage to the fork. X-Small: 80-130mm TravelSmall: 130-160mm TravelMedium: 160-200mm TravelLarge: 200mm + Travel (Dual Crown)
Sometimes it's the simplest ideas that are the best; RRP's Neoguard replaces that bit of inner tube you had cable-tied to the fork, providing maximum coverage for your eyes and face against mud flicked off the front wheel.Made from thick neoprene to allow for stretching and compression during suspension travel, it attaches to the fork crown and brace using the integrated velcro straps, making it easy to install and remove when required without risking damage to the fork. X-Small: 80-130mm TravelSmall: 130-160mm TravelMedium: 160-200mm TravelLarge: 200mm + Travel (Dual Crown)
The Topeak EP Mount is a solid aluminium seatpost mount providing an extra location for a water bottle cage. Ideal for bikes with limited space for mounting a water bottle cage, such as e-bikes or bikes with smaller frames.Diecast aluminium constructionFits ø27.2 / ø30.9 / ø31.6 mm (shims incl.) Compatible with water bottle cage, Topeak BackLoader, tail light and saddle bag13.6x6.2x4.6cm65g