Fed up with creaking, rusty or corroded bolts I.D. Chainring bolts are high quality, super strong and corrosion resistant. Supplied as a set of 5.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
A must have cycling essential the Vavert Inner Tube for 700c bike wheels is the perfect replacement for bike inner tubes which have become worn and damaged and beyond simple puncture repair. Vavert inner tubes are made from high quality durable material and come in a various range of size and valve options.Durable constructionVarious range of sizesPresta or Schrader valve type
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
The Park Tool CC3.2 Chain Wear Indicator can help identify a worn chain and save you money - worn chains will not only shift poorly but they wear sprockets and chainrings at an accelerated rate. The CC3.2 is a "go, no go gauge designed to accurately indicate when a chain reaches 0.5% and 0.75% wear, the points at which most chain manufacturers suggest replacement for the new super narrow 11 and all other (7, 8, 9 & 10 speed) chains respectively as per most manufacturer's recommendations. The latest 3.2 version of this tool is longer for added accuracy and is made from precision, laser cut steel for long life and quality.
Fed up with creaking, rusty or corroded bolts I.D. Chainring bolts are high quality, super strong and corrosion resistant. Supplied as a set of 5.
The Wippermann 700 is ideal for city, touring or BMX bikes with narrow sprockets. Compatible with derailleur systems (5, 6 & 7 speed) as well as internal hub gear systems (5, 6, 7, 12 or 14 speed). IntraX chains are more durable than conventional chains due to bushings in their inner links that ensure a greater carrying capacity on the link surface (Wider 1 2 x 1 8" chains do not run optimally on narrower sprockets).1/2" x 3/32", pin length: 7.4mmWeight: 339g/110 links114 links including Snap On link
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
A must have cycling essential the Vavert Inner Tube for 700c bike wheels is the perfect replacement for bike inner tubes which have become worn and damaged and beyond simple puncture repair. Vavert inner tubes are made from high quality durable material and come in a various range of size and valve options.Durable constructionVarious range of sizesPresta or Schrader valve type
A must have cycling essential the Vavert Inner Tube for 700c bike wheels is the perfect replacement for bike inner tubes which have become worn and damaged and beyond simple puncture repair. Vavert inner tubes are made from high quality durable material and come in a various range of size and valve options.Durable constructionVarious range of sizesPresta or Schrader valve type
A must have cycling essential the Vavert Inner Tube for 700c bike wheels is the perfect replacement for bike inner tubes which have become worn and damaged and beyond simple puncture repair. Vavert inner tubes are made from high quality durable material and come in a various range of size and valve options.Durable constructionVarious range of sizesPresta or Schrader valve type
The Park Tool SBC1 Spoke, Bearing and Cotter Gauge is a handy shop aid and is ideal for sizing spokes, ball bearings and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. Spoke lengths are in both metric and fractional markings. Made of anodized aluminium with embossed markings to allow easy reading and long life.
The Mucky Nutz Face Fender XL is the original and Patent Pending fork mounted mudguard. The XL Face Fender is the same thickness as the Standard Fast Fender but provides ultimate protection at a modest 32g. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zip ties for a more permanent solution.
A must have cycling essential the Vavert Inner Tube for 700c bike wheels is the perfect replacement for bike inner tubes which have become worn and damaged and beyond simple puncture repair. Vavert inner tubes are made from high quality durable material and come in a various range of size and valve options.Durable constructionVarious range of sizesPresta or Schrader valve type
A must have cycling essential the Vavert Inner Tube for 700c bike wheels is the perfect replacement for bike inner tubes which have become worn and damaged and beyond simple puncture repair. Vavert inner tubes are made from high quality durable material and come in a various range of size and valve options.Durable constructionVarious range of sizesPresta or Schrader valve type