Never mind the punctures, here s the new Granite Punk CNC CO2 Inflator! The Punk CO2 Inflator is a tiny but mighty stashable tool that ll inflate your tyre in no time at all. It works with 16g and 25g O2 canisters and weighs just 25g so it won t weigh you down. When anarchy strikes and your tyre goes flat, just grab the Punk and you ll be kicking out the jams again on the trails in no time. The Punk works in harmony with the Granite RockBand, allowing you to carry it with a tyre lever, multi-tool and tube on your frame. Sleeve Size: Small / Large (For 16g and 25g CO2 canister, respectively)Weight: Small - 24g / Large - 25gColour: Black
The Granite Design Valve comes with the Juicy Nipple Valve Cap & Core Removal Tool. The valves are black and are 45mm in length, you get to choose the colour of the valve caps. The valve cap is ideal to top up sealant anytime, anywhere.Colour: Black, Red, Blue, Green, Orange, Pink, GoldWeight: 10g (caps with 45mm valves in pair)
The Granite Design Valve comes with the Juicy Nipple Valve Cap & Core Removal Tool. The valves are black and are 45mm in length, you get to choose the colour of the valve caps. The valve cap is ideal to top up sealant anytime, anywhere.Colour: Black, Red, Blue, Green, Orange, Pink, GoldWeight: 10g (caps with 45mm valves in pair)
The PRO Race Comfort Bar Tape is a high performance super grippy PU bar tape with smart silicone backing which leaves no residue on the handlebars making fitting and replacing easier than ever.Special PU construction keeps the tape lightweight, comfortable, hard wearing and grippy in all weather conditionsIncludes finishing tape and bar plugs
Feel the bars like never before with the Fox Clothing Flexair Gloves. The Flexair Gloves are a minimalist glove with an exceptional fit and lightweight feel. The stretch mesh finger gussets (the fabric between your fingers) increases flexibility as well as helps channel air through the glove for superior comfort. The Flexair glove also features a conductive thread on the thumb and index finger so you can use your phone without removing your gloves.Minimalistic design for optimal comfortTruFeel internal texture for heightened feel and control of leversStretch mesh finger gussets increase airflow and dexteritySingle layer palm Touchscreen compatible95% Nylon / 5% SpandexSize Chart:
The Swissstop RX Plus replacement brake pads will enhance the performance of any cantilever brake with more feel and better braking both in the dry and especially in the wet. Like all pads in the Swissstop range the RX Plus pads have a silent operation and also has a complete absence of abrasive materials which damage rims.Green GHP II: High performance compound for aluminium rims. Excellent in the dry and unbeatable in the rain. Extremely low pad and rim wear.Original Black: Suitable for less aggressive riding, very good in dry and wet conditions. Specially recommended for rims made of softer alloy material.Supplied as 4 pad inserts for 2 complete brakes
The Park Tool HR11, HR12 and HR14 Hex Wrenches are necessary for removing the freehub bodies from several popular brands of hubs (Mavic, Sun Race, Sovos, and others).Park Tool HR11, HR12 and HR14 are through hardened industrial quality steel with chamfered tips for a precision fit.
The Microshift R10 10-Speed Cassette is sensational value and offers smooth, crisp shifting and excellent durability. Suitable for 7/8/9/10 speed standard freehub bodies, the R10 H100 has nickel-plated steel sprockets that are extremely tough and durable, to provide mile after mile of slick shifting. The 11-28T ratio provides even steps between gears to promote a smooth cadence.
The Park Tool SS15C is designed and built especially for single speed bikes, a forged multi purpose ride saver. Combining a 15mm socket for axle nuts, 15mm open end spanner for pedals, the tool also doubles up as a tyre lever and bottle opener. Just the right size and length (17cm/7") to take along or to wrench in the garage, the "SS" is destined to be a single speeders favourite.
Protects your bike and floor from sweat. Soft, terry cloth materialFully adjustable for most bikesMachine washableCloth: 12" x 17" (30.4 x 43cm)Adjustable hook and loop attachment straps)Elastic seat-post strap
Modern mountain bikes are amazing and are allowing riders to do more than they ever have. Fancy suspension and lower standover height has put water bottle cage real estate at a premium, but the Wayside cage buys some space back.
Sometimes it's the simplest ideas that are the best; RRP's Neoguard replaces that bit of inner tube you had cable-tied to the fork, providing maximum coverage for your eyes and face against mud flicked off the front wheel.Made from thick neoprene to allow for stretching and compression during suspension travel, it attaches to the fork crown and brace using the integrated velcro straps, making it easy to install and remove when required without risking damage to the fork. X-Small: 80-130mm TravelSmall: 130-160mm TravelMedium: 160-200mm TravelLarge: 200mm + Travel (Dual Crown)
Tooo Cycling mounting bracket for the DVR80 Camera Light Combo is designed to be simple and rugged. It fits to all bicycle seat posts, rear racks or front suspension forks to any bicycle on the market. The inner area is rubberised to prevent sliding on any metal, carbon or fibre bike part where you would mount the DVR80.
Attach the TOOO Cycling DVR80 Camera to your aero seat post thanks to the Aero Seat Post Mounting Adaptor. Simply position this adaptor on the aero seat post and place the DVR80 mounting bracket over it to ensure a secure fit.Size: (Height) 63mm (2.48") x (Width) 23mm (0.9") x (Aero Seat post width) 22-30 mm (0.86-1.18")
The SunRace CN10A 10-speed chain is built around strong CrMo plates for maximum performance and stability. Weighing only 266 grams its chromed pin design delivers superb plate retention strength and shifting efficiency.
Securely place vital ride info where you need it for triathlon or time trials with Zipp QuickView TT Computer Mount, an uncomplicated computer mount for aero-bar extensions that is easy to install, lightweight and above all vibration and slip free. The 22.2mm industry standard quarter-twist mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. Comes with single Torx T25 bolt, flexible mounting clamp and one quarter twist mount.
The Granite Design Valve comes with the Juicy Nipple Valve Cap & Core Removal Tool. The valves are black and are 45mm in length, you get to choose the colour of the valve caps. The valve cap is ideal to top up sealant anytime, anywhere.Colour: Black, Red, Blue, Green, Orange, Pink, GoldWeight: 10g (caps with 45mm valves in pair)
Never be caught short again when doing a bike build and you have a a gear cable tensioned in one hand to find your Hex key on the bench just out of arms reach with the Park Tool 104 Work Tray. Fits all Park Tool repair stands except PRS-2OS, PRS-3OS, PRS-4OS,and PRS-15.
This Park Tool AV1C Axle Vice tool holds the axle so it will not turn while work is done on the hub. It has two different diameter receptacles so it will work on front and rear axles. It is simple to use - just insert the axle into the proper diameter opening and tighten the bench vice. The jaws will open automatically when the vice is opened.
The Park Tool CWP7C Crank Wrench and Puller includes two rotating tips (11.3mm and 16.3mm) and built in wrench flats allowing the tool to remove cranks using a square taper, Octalink, ISIS Drive, Power Drive or Power Spline bottom bracket interface.