The R4+ LED light is Hope s mid-weight 2000 lumen headlamp with external battery 2 Cell or 4 Cell Battery Packs. The 4 powerful Cree LED s emit up to 2000 lumens of light for a burntime of up to 2 and a quarter hours using the 4 Cell ES Battery, while 6 settings allow you to tailor the amount of light to the conditions that lay ahead. The batteries ES (energy status) display and back lit power switch means you can easily keep track of what mode you are in and how much battery life you have left. Middle of the pack in terms of weight at 426g for the headlamp unit and 4 cell battery, the R4+ comes with bayonet handlebar, helmet mount fittings, head harness and 1m extension cable, making it extremely versatile for a variety of bikes and conditions.Powerful 2000 lumen headlamp unit and external battery LED light2 Power each with 3 light levels allows riders to up power or increase burntimeSupplied with separate 2 or 4 cell ES (energy status) batteries Burntime 2 hours 15 Minutes (using 4 cell battery)Includes 2 cell or 4 cell ES battery, bayonet handlebar & helmet mount fittings & 1m extension cableWeight 426g (Headlamp unit & 4 cell battery)
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The RS, Road Sport, AKTiv is the latest technology in the Exposure Lights Road range combined with the Road Specific Beam Pattern and an upgraded 1300; once AKTiv is selected the light will sense on coming light sources and auto dim when a vehicle is approaching, no button or thinking required. Also, with the specific bevels to allow side illumination, and reversible graphics to remind you that the Strada can be mounted either way up. There is also a remote switch included which allows the rider to take control if required.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.REAKT Intelligent lighting - Intelligently adapt to the surrounding ambient light conditions to maintain maximum contrast and visibility, for example brightening for street lit areas and moving into sunlight from shade.AKTIV - AKTIV is a technology that automatically dips the light when an approaching vehicles headlights are detected and returns to full beam once the vehicle has passed.Road Specific Beam - Taking its lead from car headlight technology, dual lenses deliver an optimum beam for road cycling with a flat beam for the periphery and a spot beam lighting the way ahead, which can by dipped for oncoming traffic with the included handlebar mounted, wired switch.Day Bright - Be Seen Be Safe - Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be Safe.In the Box: Strada MK11 RS AKTIV GMB, QR Handlebar Bracket, Wired Remote Switch, Fast Charger, USB Charge Cable, QS GuideSpecification:LEDs: 2 x White XPL2(W3)IP Rating: IP65Max Lumens: 1300Battery: 6,800 mAh Li-IonRuntime: 2 - 36 HoursCharging Time: 6 HoursWeight: 199gMaterial: Anodised 6063 AluminiumLength: 102mmHead Diameter: 49mm
The Apex is a premium multisport watch built for high level endurance athletes offering advance metrics to evaluate training and performance.Ultra-Durable Battery Life - Make constantly charging your watch a thing of the past. With APEX, you will have a watch that is built to last above and beyond your workout. In UltraMax setting, the battery is carefully engineered to last up to 100 hours using GPS. While using normal mode will yield up to 35 hours, and regular usage up to 30 days.Built in Premium - Transitioning from the workplace to training is easy with the APEX's intelligent build and design. With finish options including titanium alloy and stainless-steel bezel alongside a sapphire glass face for extreme protection, you are prepared for any and every environment.Simplicity at its Finest - Changing screens and using devices can be overwhelming with traditional buttons, especially in the middle of a workout. With the digital dial, you can easily navigate through the APEX, allowing you to focus on the important things like finishing your run or prepping your next set.Navigation Track - Equipped with track and navigation features, APEX can be your best tool when you need directions the most. Routes are uploaded and displayed on grid as a bread crumb trail with real time information on heading and elevation and alerts to help you get back on course.
Garbaruk's 11-Speed Shimano HG Cassette is lightweight, durable and perfect for updating your drivetrain to a wider gear range! With a trick construction and equally trick looks, the 11-Speed Shimano HG Cassette is a real connoisseur's choice!Lightweight & high quality chromoly steel with aluminium largest cog for incredible durabilityHeat treated monoblock design for lightest possible weightDesigned for standard Shimano HG freehub bodies for maximum compatibilityProvides smooth shifting and no chain drop when back pedallingSome derailleurs require Garbaruk RD Cage for 11-50T option (Sold separately)The 11-Speed Shimano HG Cassette is designed to be the most durable and lightweight 11-speed wide-range cassette, compatible with widely used Shimano HG freehub. Manufactured using high-quality chromoly steel alloy coupled with the strongest possible aluminium largest cog, it's the ultimate solution for all riders out there who are looking for efficient way to enhance the performance of their MTB or road/CX bike. The cassette is machined and heat-treated to create a monoblock cassette out of steel with only largest cog made out of aluminium. This allows for the best possible durability and rigidity while keeping weight extremely low. If you want it all from your cassette when it comes to performance and durability, look no further than the Garbaruk 11-Speed Shimano HG Cassette!
Garbaruk's 11-Speed Shimano HG Cassette is lightweight, durable and perfect for updating your drivetrain to a wider gear range! With a trick construction and equally trick looks, the 11-Speed Shimano HG Cassette is a real connoisseur's choice!Lightweight & high quality chromoly steel with aluminium largest cog for incredible durabilityHeat treated monoblock design for lightest possible weightDesigned for standard Shimano HG freehub bodies for maximum compatibilityProvides smooth shifting and no chain drop when back pedallingSome derailleurs require Garbaruk RD Cage for 11-50T option (Sold separately)The 11-Speed Shimano HG Cassette is designed to be the most durable and lightweight 11-speed wide-range cassette, compatible with widely used Shimano HG freehub. Manufactured using high-quality chromoly steel alloy coupled with the strongest possible aluminium largest cog, it's the ultimate solution for all riders out there who are looking for efficient way to enhance the performance of their MTB or road/CX bike. The cassette is machined and heat-treated to create a monoblock cassette out of steel with only largest cog made out of aluminium. This allows for the best possible durability and rigidity while keeping weight extremely low. If you want it all from your cassette when it comes to performance and durability, look no further than the Garbaruk 11-Speed Shimano HG Cassette!
Redshift's patent-pending ShockStop Suspension Seatpost provides 35mm of tunable, ultra-responsive suspension travel for the ultimate bump-eating comfort. 35mm of active suspension travel improve comfortSwappable springs included for different rider weightsOptimised linkage geometry provides ultra-responsive suspension27.2mm x 350mm lengthThe ShockStop's 20mm of front suspension and 35 mm of rear suspension let you float over rough terrain, allowing to ride further, faster, and more comfortably on the bike you already own. The minimal, subtle design blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. The swappable springs allow the spring rate to be tuned for different rider weights, while the 27.2mm size will fit most bikes.
Stand up paddle boards, or SUPs, are a fantastic way to get out on the water for both beginners and people more versed in the world of water sports. The Bestway 10ft 2" Hydro Force Kahawai Stand Up Paddle Board Set is a brilliant starter set that is suitable for flat water or river boarding.Encourages outdoor play for a healthy lifestyleHelps develop muscle strength and balanceIncludes board, tether, pump, carry bag and oarThis thick paddle board is designed to be extra safe and stable and with the addition of non-slip traction pads ensure you stay balanced even when the deck is wet. The stability makes it perfect for long tours on flat water or on a river. The drop-stitch construction material combines extreme rigidity with incredible lightness, all thanks to the network of thousands of polyester threads. Pop it out of the handily included carry bag and start pumping with the included pump. 10-12 minutes later the Hydro Force Kahawai Stand Up Paddle Board is fully inflated and ready to go. Perfect for popping in the boot of the car or taking on holiday.
SixSixOne Recon Advance Upper Body Protection is stacked with tech to keep you safe, they ve combined a lightweight and breathable Koroyd back plate with twin layer elbow and shoulder impact components from Astrotech for maximum confidence and unrivalled comfort on the trail.Astrotech elbow and shoulder impact components providing CE EN:1621-1 protectionHydration bladder compatible, with left and right routed hose openingsFront and Rear stash pockets for ride essentialsWicking compression fabricsWeight 865g (M)Sizes S-XL
SixSixOne Recon Advance Upper Body Protection is stacked with tech to keep you safe, they ve combined a lightweight and breathable Koroyd back plate with twin layer elbow and shoulder impact components from Astrotech for maximum confidence and unrivalled comfort on the trail.Astrotech elbow and shoulder impact components providing CE EN:1621-1 protectionHydration bladder compatible, with left and right routed hose openingsFront and Rear stash pockets for ride essentialsWicking compression fabricsWeight 865g (M)Sizes S-XL
SixSixOne Recon Advance Upper Body Protection is stacked with tech to keep you safe, they ve combined a lightweight and breathable Koroyd back plate with twin layer elbow and shoulder impact components from Astrotech for maximum confidence and unrivalled comfort on the trail.Astrotech elbow and shoulder impact components providing CE EN:1621-1 protectionHydration bladder compatible, with left and right routed hose openingsFront and Rear stash pockets for ride essentialsWicking compression fabricsWeight 865g (M)Sizes S-XL
SixSixOne Recon Advance Upper Body Protection is stacked with tech to keep you safe, they ve combined a lightweight and breathable Koroyd back plate with twin layer elbow and shoulder impact components from Astrotech for maximum confidence and unrivalled comfort on the trail.Astrotech elbow and shoulder impact components providing CE EN:1621-1 protectionHydration bladder compatible, with left and right routed hose openingsFront and Rear stash pockets for ride essentialsWicking compression fabricsWeight 865g (M)Sizes S-XL