The SRAM NX Eagle Trigger shifter uses the same ergonomic design as SRAM's higher end shifters and carries over many of their features, including Zero Loss to provide instant and responsive shifting as well as being MatchMaker X compatible, so it can be easily synced with SRAM brake levers to leave a clean, uncluttered cockpit. The NX Eagle Trigger Shifter also features a unique cover for the gear cable, so you can easily change the gear cable without having to dismantle the shifter cover, making cable changes a breeze. Offering the same shift action as other SRAM trigger shifters, the NX Eagle Trigger Shifter is compatible with all other SRAM Eagle groupsets, so you can mix and match to your hearts content! The aluminium and plastic construction is also lightweight yet highly durable, so unlike other areas, the trickle down technology effect does not come with a weight penalty. Smooth, accurate and highly durable, the SRAM NX Eagle Trigger Shifter offers excellent performance and is superb value for money.
This high-quality 9-piece L-key set from Wera Tools utilises Wera s Take It Easy Colour Coded Tool Finder system; ensuring that the correct tool is always quickly to hand. When not in use, the L-Keys are neatly tucked away in a wear-resistant clip, allowing secure, organised storage of the L-keys, as well as simple removal when required.The Hex-Plus profile design offers a greater contact surface in the head of the screw. This means damage to the screw head more or less eliminated, prolonging the life of the screw. The ballpoint on the long arm allows dependable working even in difficult installation situations. The ergonomic design of the handle means that these keys are pleasant to hold, even when working in low temperatures. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life.Sizes:Hex x Length: 1.5 x 90, 2 x 101, 2.5 x 112, 3 x 123, 4 x 137, 5 x 154, 6 x 172, 8 x 195, 10 x 224
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. The Nerius 110 BCD outers are compatible with Campagnolo carbon compact square taper and Record carbon, Chorus carbon and Centaur alloy compact Ultra-Torque cranks. Nerius inners are for all compact Ultra-Torque cranks. The 5th arm is slightly offset for crank fixing while the 5th bolt hole has no recess for a bolt head as this bolts straight into the back of the crank.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. The Nerius 110 BCD outers are compatible with Campagnolo carbon compact square taper and Record carbon, Chorus carbon and Centaur alloy compact Ultra-Torque cranks. Nerius inners are for all compact Ultra-Torque cranks. The 5th arm is slightly offset for crank fixing while the 5th bolt hole has no recess for a bolt head as this bolts straight into the back of the crank.
The KMC X12 is a high performance and extremely durable chain compatible with 12-speed SRAM derailleur systems. The X12 consists of 126 links with a pin length of 5.2mm and weighs 268g. The chain is nickel plated and non-directional.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. The Nerius 110 BCD outers are compatible with Campagnolo carbon compact square taper and Record carbon, Chorus carbon and Centaur alloy compact Ultra-Torque cranks. Nerius inners are for all compact Ultra-Torque cranks. The 5th arm is slightly offset for crank fixing while the 5th bolt hole has no recess for a bolt head as this bolts straight into the back of the crank.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. This TA chainring is suitable for standard Campagnolo 8, 9 and 10 speed chainsets.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. This TA chainring is suitable for standard Campagnolo 8, 9 and 10 speed chainsets.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. The Nerius 110 BCD outers are compatible with Campagnolo carbon compact square taper and Record carbon, Chorus carbon and Centaur alloy compact Ultra-Torque cranks. Nerius inners are for all compact Ultra-Torque cranks. The 5th arm is slightly offset for crank fixing while the 5th bolt hole has no recess for a bolt head as this bolts straight into the back of the crank.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. The Nerius 110 BCD outers are compatible with Campagnolo carbon compact square taper and Record carbon, Chorus carbon and Centaur alloy compact Ultra-Torque cranks. Nerius inners are for all compact Ultra-Torque cranks. The 5th arm is slightly offset for crank fixing while the 5th bolt hole has no recess for a bolt head as this bolts straight into the back of the crank.
The Park Tool utility pick set features 1-straight, 1-hook and 1-90 degree pick that are ideal for a wide variety of detail work. The picks feature an aluminium handle with magnet and replaceable picks which are made form cold formed, heat treated and polished high carbon steel.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers. The Nerius 110 BCD outers are compatible with Campagnolo carbon compact square taper and Record carbon, Chorus carbon and Centaur alloy compact Ultra-Torque cranks. Nerius inners are for all compact Ultra-Torque cranks. The 5th arm is slightly offset for crank fixing while the 5th bolt hole has no recess for a bolt head as this bolts straight into the back of the crank.
Cane Creek's 40 series headset features high quality 6061 aluminium cups which house durable black oxide cartridge bearings which are capable of withstanding extended use in muddy and gritty conditions with minimal maintenance.The low friction seals allow for seamless movement, whilst Cane Creeks's 'Clip-Seal' design completely seals the top assembly and captures the compression ring to reduce the number of loose parts required, simplifying assembly and saving weight. A 40 series headset represents the perfect balance of performance, durability and value.
The Topeak DynaWedge Saddle Bag is a lightweight and water repellent saddle bag that fits snugly under your saddle. It ideal for storing all those ride essentials such as inner tubes, multi-tools etc.Elastic Polyurethane Fibre / EVA Foam210 Denier / 420 Denier Nylon (weatherproof version)Easily mount to saddle rails with adhesive straps and seatpost with rubber strapSuitable for most type of saddle railsFits ø25.4 - ø31.8mmMicro: 14x4.5x10.5cm, 0.35L, 66gSmall: 18.5x6x14.5cm, 0.8L, 98gThe bag has a unique but clever centre opening which gives you quick and easy access to its contents. The bag can be easily fitted underneath your saddle with hook and loop straps attaching it to the rails and a rubber strap securing it to your seatpost.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.7075 T6 heat treated aluminium constructionCompatible with Super Record, Record, Chorus 10 speed chainsets
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.
The SunRace CN12Q 12-speed Easy Link is a simple and easy to use quick link for 12-speed SunRace chains.