Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturers entry level bearing.These standard ABEC3 MAX bearings are designed for use within linkages on full suspension frames, they have 40% more balls compared to standard ABEC3/5 bearings which gives unparalleled levels of smooth linkage movement when the frame is compressed.
The Burgtec Direct Mount Stem Spacer Bolts are only for use in conjunction with the Burgtec Direct Mount Stem Spacer. The bolts are used to securely fasten the stem to the fork when using the Direct Mount Stem Spacers.30mm bolts for use with one Burgtec Direct Mount Stem Spacer 5mm35mm bolts for use with two Burgtec Direct Mount Stem Spacer 5mm40mm bolts for use with three Burgtec Direct Mount Stem Spacer 5mm
These iPhone 4 and 4S cases from DC offer protection for you treasured device and an additional way to personalise your phone. The Photel Cases are designed with typical attention to detail (so the cut outs are actually in the right places) and functionality and include DC Branding for an added touch. The Cases feature a matte finish and are a hard case.Colours:OrangeArt PrintBlackFluro Green
These iPhone 4 and 4S cases from DC offer protection for you treasured device and an additional way to personalise your phone. The Photel Cases are designed with typical attention to detail (so the cut outs are actually in the right places) and functionality and include DC Branding for an added touch. The Cases feature a matte finish and are a hard case.Colours:OrangeArt PrintBlackFluro Green
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
The Semi-Metallic Disc Brake Pads from Fibrax are made in the UK and specifically designed for UK riding conditions. Manufactured and tested to the highest standards these pads provide excellent modulation across the temperature range and are more powerful than sintered pads. Ideal for most types of mountain biking such as XC, Trail etc and even commuting. The back plate is also corrosion proof.
The Semi-Metallic Finned Disc Pads from Fibrax take the best of the standard Semi-Metallic brake pads and used feedback from sponsored riders, to increase performance by adding fins. This reduces the pad temperatures by over 50 degrees.Ideal for Trail centres & long technical descentsExcellent braking power even in the worst weather and trail conditionsLightweight Anodised back plateDesigned and made for UK riding conditionsManufactured and tested to the highest standardsFibrax s finned system is incredibly efficient and is over three and a half times cooler than the market leading equivalent in finned pads. These pads provide excellent braking power whatever the weather and whatever the trail conditions and are the perfect choice for long technical alpine descents to trail centres and uplift days.
The Semi-Metallic Finned Disc Pads from Fibrax take the best of the standard Semi-Metallic brake pads and used feedback from sponsored riders, to increase performance by adding fins. This reduces the pad temperatures by over 50 degrees.Ideal for Trail centres & long technical descentsExcellent braking power even in the worst weather and trail conditionsLightweight Anodised back plateDesigned and made for UK riding conditionsManufactured and tested to the highest standardsFibrax s finned system is incredibly efficient and is over three and a half times cooler than the market leading equivalent in finned pads. These pads provide excellent braking power whatever the weather and whatever the trail conditions and are the perfect choice for long technical alpine descents to trail centres and uplift days.
Swissstop have long been the top choice for riders with rim brakes and are now the top choice for disc-equipped bikes too. The ExoTherm 2 Disc Brake Pads are designed to massively reduce heat build up, improving all aspects of braking performance in harsh braking conditions.Cooling fins massively reduce heat build up, providing better performance for longerPad compound provides excellent braking performance, feel and durabilityProvides excellent brake modulation - ideal for loose and steep conditionsSupplied for high quality springs for excellent pad retractionSupplied as pairs for one wheelBased on Swissstop's class leading organic pad compound, the ExoTherm 2 pads are the number one choice if your regularly cook your brakes. By massively reducing heat build up, your brakes will perform The pad compound is formulated to provide excellent power while also giving superb modulation and durability. The pad compound offers quiet operation and low rotor wear. If you give your brakes a hard time, you need to check out the Swissstop RS Disc Brake Pads!
Swissstop have long been the top choice for riders with rim brakes and are now the top choice for disc-equipped bikes too. The ExoTherm 2 Disc Brake Pads are designed to massively reduce heat build up, improving all aspects of braking performance in harsh braking conditions.Cooling fins massively reduce heat build up, providing better performance for longerPad compound provides excellent braking performance, feel and durabilityProvides excellent brake modulation - ideal for loose and steep conditionsSupplied for high quality springs for excellent pad retractionSupplied as pairs for one wheelBased on Swissstop's class leading organic pad compound, the ExoTherm 2 pads are the number one choice if your regularly cook your brakes. By massively reducing heat build up, your brakes will perform The pad compound is formulated to provide excellent power while also giving superb modulation and durability. The pad compound offers quiet operation and low rotor wear. If you give your brakes a hard time, you need to check out the Swissstop RS Disc Brake Pads!
Punctures suck. Tubeless setups provides some salvation from puncture induced misery, but even they aren't infallible. This is where tubeless plugs come in, and Blackburn's Tubeless Plug Kit is one of the best, so you can be fully prepared to repair your tubeless tyre wherever you are.Combined tyre reamer and insertion tool with storage tube/handleIncludes 10 tyre plugs, storage case and strapThis compact kit has all you'll need to repair a tubeless tyre. With 10 plugs and an easy to use insertion tool, you'll be back on the trail in no time. The insertion tool also doubles as a tyre reamer to keep things simple and compact. This is a great compact kit to throw in your bag and forget about until you need it, or if you want to keep it close to hand, why not use the included strap to store it on the bike Strap it to your seatpost, top tube, down tube, where ever you want!
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap Bolt is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap Bolt is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap.
Additional bolts for fitting the RRP ProGuard Bolt-on mudguard. Useful if you accidentally loose one. Kit contains 2x M3, 3x M4 & 1x M6 bolts.
Manufactured from a premium strength brass and composite the Crank Brothers Quattro cleats offer superior durability. Weighing in at a lightweight 86g per pair and utilizing a 3 bolt fitting for integrating with most modern day Road bike shoes on the market today. The Quattro cleats can be adjusted for either 15° or 20° release angle helping you get the perfect setting to match your riding style. Compatible With Eggbeater, Candy, Quattro Pedals.
The Cinelli Music Volee Tape gives your handlebars that amazing finishing touch. However, the tape is not just all about the looks. It works hard at absorbing road vibration, enhancing handling in wet weather conditions and gives you more control if you`re dealing with the curse of the sweaty hands. Sold in two-roll sets with enough to wrap one complete drop bar. Includes Cinelli bar-end plugs and finishing strips.
Deda's Presa Handlebar Tape has a unique 2 in 1 construction with an EVA core combined with a tacky PU surface to provide excellent comfort and grip. At 3mm thick in the centre, the Presa Handlebar Tape provides plenty of cushioning for riding longer distances or rides over rough terrain, making it perfect for everything from sportives to long gravel and adventure rides. Ther perforated and tacky PU surface is incredibly grippy, even in wet and muddy conditions too. Supplied with enough tape to wrap both sides of your handlebar, the Deda Presa Handlebar is perfect for riders looking for grippy, comfortable bar tape.
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Whether you are commuting, touring or out on a Sunday club run there will always be a time that you will need to walk in your shoes. Not only is walking tricky in cleats but it also damages the cleats which means you will be replacing them more often than you would like. With the Kèo cleat cover you will not only make walking easier, you will also protect your cleats from any damage and as a result make your cleats last a lot longer.
Look s X-Track MTB Cleats are compatible with all Look X-Track pedals as well as SPD-compatible pedals from Shimano and other brands. With 6 degrees of float and weighing just 45g, these cleats are solid, reliable and durable thanks to their premium steel construction.