The Burgtec Bartender Grips feature a tacky rubber compound and a knurled pattern, offering exceptional traction and durability. The ultra-thin tapered core allows for more rubber, providing unrivalled vibration reduction on a 30mm grip. The bartenders are clamped securely by a single 7075 aluminium collar with a stainless-steel bolt thanks to the tightly tapered core which eliminates the need for an uncomfortable outer lock on.The Burgtec Bartender Grips look great, perform well and are extremely durable, a worthy addition to any bike.Single lock onTacky rubberLow profile design30mm DiameterWeight: 90g
Black Jack is Schwalbe s versatile budget all-rounder. Ideally suited to an entry level mountain or child s bike, the Black Jacks continuous centre tread rolls well on hard surfaces yet still offers good grip off the beaten patch. The active compound also increases durability, meaning all those skids won t tear through them as soon as other entry level tyres. This version is equipped with Schwalbe's K-Guard puncture protection for additional protection against flats. If you need a replacement entry level tyre the Black Jack is more than up to the task.
Cateye's Tight Kinetic Rear Brake Light is tough, highly waterproof and features a range of clever innovations designed to keep you safe.Waterproof design rated to IPX72x AAA batteries (included) provide long run time of up to 180 hours5 LEDs with 3 modes - 2 flashing, 1 lightingSimply switch between modes with one buttonFlexTight bracket is quick and easy to use on seatpost or seat staysTough and versatile, the Tight Kinetic uses 5 LEDs to help you remain seen out on the road and is breeze to use thanks to its single button operation and FlexTight bracket. Thanks to the included AAA batteries, the Tight Kinetic can run for up to 180 hours, while 3 modes give you a range of options to choose from. If you want a great value rear light, the Cateye Tight Kinetic Rear Brake Light is a great choice!
The Cateye Reflex Auto Rear Light has been produced with built in reflectors that exceed international standards and automatically turns on & off using light and motion sensors. The Reflex Auto will automatically turn on whenever both darkness and motion are detected by the motion and light optic sensors, providing the rider safety both while the light is turned on and while functioning solely as a reflector.5 LEDsGreater than 180-degree visibilityAutomatically turns on / off by light and motion sensorsEmits light for 50 seconds after the bike stopsBuilt-in reflectors that meet highest government standards (USA, Great Britain, Europe and Japan)OptiCube lens technologyAAA alkaline battery x 25 modesMode memory functionSP-5 bracket (ø21.5-31.8mm) and Rear rack bracketWeight 82gDesigned in JapanRUNTIME:Constant mode: 30hrsFlashing mode: 100hrsRapid mode: 60hrsLong-life mode: 120hrsPulse mode: 30hrsTECHNOLOGIES:Auto Light - Auto on/off controlled by motion & optical light sensors to automatically turn the light on when darkness of motion is detectedReflector - Our reflector technology exceeds the highest government standards around the worldOpticube - Our proprietary OptiCube lens technology maximizes brightness for greater visibilitySide Visibility - Provides visibility from the side to increase safetyAll Weather - Can be used in rainy weather
Keep your smartphone on you at all times with the Quad Lock Belt / Utility Clip!Secure Mounting - The patented dual-stage lock means you can securely attach your smartphone to your belt, pocket or backpack with a simple twistQuick to attach / detach - Don't miss an important call again. Twist and press the lever in one motion to quickly access your smartphoneSleek Design - Light and simple to use, the Quad Lock Belt / Utility Clip can be subtly attached to a variety of materialsTechnical - Glass filled nylon / polycarbonate constructionStainless steel hardware - Fits a belt up to 1¾" (45mm) wide and 3/32" - " - (3-4mm) thickCompatible with all Quad Lock cases and Universal Adaptors
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
Stan's Rim Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.Creates durable, airtight seal over spoke holesCompletely non-porous vapor barrier seals rim interior from moistureNatural gum rubber adhesive sticks where and when you want it to but leaves no residueLow friction surface helps tyre beads slip into place10 Yards will seal approximately 10 rims
The Sleeve and Lanyard from GoPro is great for personalising your GoPro camera and keeping it to hand so you re ready to catch the latest action.Adjustable lanyard keeps your GoPro to hand. You can wear it or attach it to your gearPremium silicone sleeve fits snugly without adding extra bulk and offers extra protectionThin and flexible material makes it easy to insert and remove your GoProAllows you to access the camera buttons and rear LCD for full functionalityMade using premium silicone, this sleeve offers added protection for your camera and fits tightly so that it doesn t add extra bulk. The lanyard is adjustable, so it can be adapted for a variety of uses like wearing around your neck, on your wrist or even attached to your gear such as a rucksack. The GoPro Sleeve and Lanyard is an ideal accessory for your GoPro camera keeping it to hand, extra protection and so you won t miss a moments action.What s included; Silicone Sleeve, LanyardCompatibility; HERO7 Black, HERO7 Silver, HERO7 White, HERO6 Black, HERO5 Black, HERO (2018)Warning: Using the lanyard improperly may result in injury. Please do not tie or alter it in any way.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturers entry level bearing.Enduro were the first company to produce a truly sealed full ceramic bearing and this selection for your bike will make it run like a dream.NB: Sold Individually, not as a pair
The Mega Plug Nozzle Kit for the Dynaplug Air system works with either the MTB or the Road versions of the air system. Includes Megaplug Air insertion tube and 4 x Megaplugs.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturers entry level bearing.Enduro were the first company to produce a truly sealed full ceramic bearing and this selection for your bike will make it run like a dream.NB: Sold Individually, not as a pair
This is a refill pack for the Peaty s Holeshot CO2 MTB Tyre inflator. It contains five 25g CO2 cartridges per pack and includes 1 freeze protector sleeve.25g Cartridges for MTB / 16g Cartridges for Road & Gravel5 x threaded CO2 cartridges per pack, including 1 freeze protector sleeve with unique closed base designPackaged using recycled cardboard header cards and biodegradable bags
Extra-long fastening strap for e-bikes with thicker down tube for easy fixation to the Tailgate Pad.11g42x3x 0.5cmOne size (length: 30cm)Material - 100% Polyester, Hypalon
The DMR Sect seat clamp is completely rider designed and represent the realist dirt bike products around. Everything with the DMR Sect stamp is super-light and super-strong. The DMR Sect seat clamp is ready for the Dirt. The DMR Sect mtb seat post clamp is a CNC bike clamp with laser etched graphics. DMR machined windows into the side of the seat clamp to make it as light as possible.CNC seat-clampLaser etched graphicsMachined windows15g
The DMR Sect seat clamp is completely rider designed and represent the realist dirt bike products around. Everything with the DMR Sect stamp is super-light and super-strong. The DMR Sect seat clamp is ready for the Dirt. The DMR Sect mtb seat post clamp is a CNC bike clamp with laser etched graphics. DMR machined windows into the side of the seat clamp to make it as light as possible.CNC seat-clampLaser etched graphicsMachined windows15g