Inline alloy barrel adjuster for fine tuning gear set up. High grade barrel adjuster can be installed inline on SP41 gear cable to allow fine adjustment of gear indexing.
Key Features:Steel tandem inner gear cable for smooth and lasting shifting performanceSteel tandem length inner wire with anti corrosion treatmentSuitable for front or rear mechs, just cut to fitUse with SP41 gear cable outer1.2 mm x3000 mm.
Key Features:Complete top-of-the-range brake cable set designed to suit Shimano Dura-Ace 7900 and Ultegra 6700 Road bike brakesetsDie-extruded PTFE coated inner wire leaves a smooth surface for low friction in use, and stainless steel gives smooth shifting and higher corrosion resistanceIncludes 1.6 mm PTFE inner wires (1 x 1000 mm and 1 x 2050 mm), and 5 mm outer casing for a complete bike (1 x 800 mm and 1 x 1400 mm), and all end capsOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Complete brake cable set designed to suit the top-of-the-range Shimano XTR mountain bike brakesetStainless steel ground inner wires give smooth shifting and higher corrosion resistanceIncludes 1.6 mm inner wires (1 x 1000 mm and 1 x 2050 mm), and black 5 mm M-System outer casing for a complete bike (1 x 2200 mm), and all end capsSealed end caps with internal O-ring gives an effective seal against the elements, prolonging service lifeOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Key Features:Inline alloy barrel adjuster for fine tuning brake set upHigh grade barrel adjuster can be installed inline on SLR or M-System brake cable to allow fine adjustment of brakes.
Key Features:SM-JC40 cable junction for external wire routingJunction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction boxTo be mounted on bottom bracket cable guide threaded fitmentCables sold separatelyReliable and secure water resistant connectors.
Complete top-of-the-range gear cable set designed to suit Dura-Ace 9000 gearsFitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one packIncludes 1.2 mm Polymer coated inner wires (1 x 2100 mm, 1 x 1800 mm), and SP41 outer casing for a complete bike (1 x 1700 mm), and all end capsPolymer coated stainless steel inner wire leaves a smooth surface for low friction and reduced sliding resistance giving a lighter quicker shifting operationOuter casing is lubricated internally along its length with low-friction silicone grease to reduce cable frictionSP 41 outer casing uses a special directional wound construction process makes for an axially stiff cable that transmits shifting movements accurately and quicklyOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Complete OPTISLICK gear cable set designed to suit XT M8000 MTB gears.Fitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one pack,Includes 1.2 mm OPTISLICK inner wires (1 x 2100 mm and 1 x 1800 mm), and SP41 outer casing for a complete bike (1 x 3300 mm), and all end caps / rubber shields,OPTISLICK is electrically coated to the stainless steel inner wire leaves a smooth surface for low friction and reduced sliding resistance,Outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction,SP 41 outer casing uses a special directional wound construction process makes for an axially stiff cable that transmits shifting movements accurately and quickly,Outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Key Features:The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but gives effortless gear shifts.E-tube Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine tuning with the correct cable length to each component for easy and tidy fitment.EW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal to the rear mech, front mech, battery and to the handlebar battery indicator junction box.EW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cables.Reliable and secure water resistant connectors.
Key Features:Stainless steel inner gear cable for smooth and lasting shifting performanceStainless steel precision ground round inner wires offer smooth low friction shift action with increased service life due to its anti-corrosion natureSuitable for front or rear mechs, just cut to fitUse with SP41 gear cable outer1.2 mm x 2100 mm.
Complete top-of-the-range brake cable set designed to suit Dura-Ace 9000 brakesFitting new brakes or completely overhauling your brake cabling couldn't be easier - everything you need in one packIncludes 1.6 mm Polymer coated inner wires (1 x 2000 mm, 1 x 1000 mm), and SLR outer casing for a complete bike (1 x 1800 mm, 1 x 800 mm), and all end capsPolymer coated stainless steel inner wire leaves a smooth surface for low friction and reduced sliding resistance giving a lighter quicker braking operationOuter casing is lubricated internally along its length with low-friction silicone grease to reduce cable frictionSLR casing uses a special spiral wound construction that is axially stiff yet can be bent around handlebar curvesThe outer casing is lined with a hard polymer sheath to keep its round shape to assist with the smooth operation of the inner wire.
Key Features:Complete brake cable set for Road / MTB bikesFitting new brakes or completely overhauling your brake cabling couldn't be easier - everything you need in one packUses dual ended inner wire for use on road or MTB applicationsIncludes 1.6 mm inner wires (1 x 1000 mm and 1 x 2050 mm), and black 5 mm M-System outer casing for a complete bike (1 x 2200 mm), and all end capsOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Key Features:Steel inner tandem brake wire for use with MTB brake leversSteel tandem length inner wire with anti corrosion treatmentUse with M-System brake cable outerSuitable for front or rear brakes, just cut to fit1.6 mm x 3500 mm.
Key Features:Complete road gear cable set designed using stainless steel inner wires for increased service life,Fitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one pack,Includes 1.2 mm inner wires (2 x 2000 mm),and black 4 mm outer casing for a complete bike (2 x 600 mm, and 1 x 320 mm), and all end caps,Stainless steel inner wires give smooth shifting and higher corrosion resistance,Outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction,Special construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quickly,Outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
Key Features:Stainless steel inner brake wire for use with SLR road bike brake systemsStainless steel precision ground round inner wire gives smooth action and high corrosion resistanceUse with SLR brake cable outerSuitable for front orrear brakes, just cut to fit1.6 mm x 2050 mm.
Features:Stainless steel inner brake wire designed to complement the top-of-the-range Shimano XTR brakesetStainless steel precision ground round inner wire gives smooth action and high corrosion resistanceUse with M-System brake cable outerSuitable for front or rear brakes, just cut to fit1.6 mm x 2050 mm.
Key Features:Shift cable set, specifically designed to be compatible with Campagnolo shift systems,Pre-coated liner with special polymer compound for reduced friction,Pre-stretched Slick-Stainless inner cables with low friction surface for excellent responsiveness,11 speed compatible,Includes: 1800mm outer cable, 290mm outer cable, 1.1 x 2000mm inner cable, 1.1 x 1500mm inner cable, accessories.
Key Features:Brake cable set, specifically designed to be compatible with Campagnolo road brake systems,Pre-coated liner with special polymer compound for reduced friction,Pre-stretched Slick-Stainless inner cables with low friction surface for excellent responsiveness,Includes: 2200mm outer cable, 1.5 x 2000mm inner cable, 1.5 x 1200mm inner cable, accessories.
Key Features:Hydraulic cable replacement set compatible with Avid brake systems,Complete set for front and rear brakes,Complete with all necessary parts including hose fittings,Compatible with: Juicy Ultimate, Juicy Carbon, Juicy 7, Juicy 5.
BCB-10 - SpeedWire Teflon Coated Inner Gear Cable Features:Innovative construction for precision shifting,Teflon coated (TEC),Length: 1.1mm x 2000mm.