Fiends new Invest fork features fully heat-treated chromoly tubing throughout with a 1pc. machined steerer tube with integrated bearing race for use with all 45v45 headsets and a 6061 alloy compression bolt. The 6mm thick investment cast drop out and lower leg junction provide the ultimate strength while maintaining a clean look and the 26mm offset helps keep the front wheel under the rider for easier nose manuals.###section### Product Specs Steerer Length: 162mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 26mm Weight: 963g / 2.124lbs ###section###
Durable cassette style freecoaster hub from Saltplus. The saltplus Trapez hub can be converted from freecoaster to cassette with the Trapez spring kit (Sold seperately). The slack of the freecoaster can adjusted using the included discs. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:467g / 16.47oz
36 hole complete rear wheel with a 36mm wide double wall rim laced to a 9t cassette hub with a 14mm axle and 5 sealed bearings. The driver has 3 sets of pawls for solid engagement. ###section### Product Specs WHEEL SIZE:20" HUB:9t cassette hub AXLE:14mm DRIVE SIDE:Right Side Drive RIM:36mm wide double wall SPOKES:TBC NIPPLES:TBC WEIGHT:TBC
Features DWR Polyester/Spandex 4-way stretch woven fabric for increased comfort. BOA System dial and lace technology for a lightweight, incrementally adjustable waist closure for the ideal fit. Silicone print on inner waistband to minimize slippage. Inseam laser holes and perforated back leg panels fr increased airflow. Zipper pockets for security of essentials. Stabilisation pocket to store device or tool. Tapered leg reduces drag and articulated knee improves mobility.
Features DWR Polyester/Spandex 4-way stretch woven fabric for increased comfort. BOA System dial and lace technology for a lightweight, incrementally adjustable waist closure for the ideal fit. Silicone print on inner waistband to minimize slippage. Inseam laser holes and perforated back leg panels fr increased airflow. Zipper pockets for security of essentials. Stabilisation pocket to store device or tool. Tapered leg reduces drag and articulated knee improves mobility.
The R-Core X race pants are made from DWR polyester/spandex 4-way stretch woven fabric for increased comfort and a BOA Fit System dial and lace technology for a lightweight, incrementally adjustable waist closure for the ideal fit. The silicone print on inner waistband minimises slippage and laser perforations in inseam and behind the knees for increased airflow. They also feature zipper pockets for security of essentials.
The crank of choice for Devon Smillie, the Onyx cranks from Eclat are the finest and the most inventive 3pc Chromoly cranks to date. They feature an oversize 24mm spindle, and a dependable 3pc design, allowing them to fit bolt bolt-drive and spline-drive sprockets. The arms, still use a super strong invest cast boss design at the spindle and pedal ends. The Onyx now feature updated the welding for improved strength. These cranks are designed to take the strain, stress and power of todays most fierce riders. ###section### Product Specs Crank Type:3pc Spindle Diameter:24mm Includes BB:No Weight:840g / 29.65oz ###shogun-image-section###
The ultimate chest protector specifically developed to integrate with industry leading neck braces without compromising fit, protection or rider safety. Exclusively designed to allow neck braces to nest properly against a rider's chest and back. Tested by top pros and elite amateurs, the innovative patent pending design gives riders the power to choose from multiple configurations for customised comfort and fit, unobstructed motion, and unprecedented protection.
Salt Ex sealed cassette hub laced to the Salt Valon reinforced single wall alloy rim. 36mm wide for 2.3"+ tyres. Includes rim tape and a Saltplus nylon hubguard. ###section### Product Specs WHEEL SIZE:20" HUB:Salt Ex sealed cassette AXLE:14mm DRIVE SIDE:Right Side Drive RIM:Salt Valon SPOKES:TBC NIPPLES:Aluminum WEIGHT:TBC
Offering protection from the elements with classic Vans styling, the Street Outdoor MTE-1 Jacket features durable water repellent coating, a secure zip front closure, a hood, and lightweight fill for added warmth. The colourblocked design adds a unique aesthetic, and the woven logo label brings a workwear vibe. Made with a mix of polyester and nylon, this durable ripstop parka delivers on a promise of an all-weather enabling product.
The Vans Wells MTE Jacket is a water-resistant varsity jacket with a snapfront closure and hidden zipper placket for extra warmth and protection. It has a 5K durable water repellent (DWR) coating, adjustable bungee cords at the hood, and the Vans logo at the lower body. It has a contrasting sleeves and side pockets.
Vans have improved the classic chore coat and made it tough enough for all-weather skateboarders. Taken from the workshops of hard labour and tweaked to be more durable, enhanced to repel water, and toughened up for the everyday grind, the Drill Chore Coat MTE features a 100% nylon 2L oxford shell with sustainable DuPont® Sorona® fill to keep you warm in cold weather yet cool and dry when you are active, 1K Durable Water Repellent coating for added protection, a removable hood, and moisture-wicking lining. It also includes a corduroy collar, a fully functional zip-off hood, a low-profile snap-front placket with a hidden zipper closure, dual entry pockets, and a reflective woven label at the chest pocket
Dual Angular Contact,this describes the use of both angular contact bearings and angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. Here are a few key points of the AC-2 BMX Front Hub: The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell without any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in perfect alignment with each other! This ensures superior bearing performance and less chance of premature wear. Hub shell literally floats on the axle. The only force on the bearings is supplied by the wave spring (which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! ###section### Product Specs AXLE SIZE: Females Bolts SPOKE HOLES: 36h BEARINGS: Steel 20mm angular contact WEIGHT: 245g / 8.64oz
The S&M Slidepipe V2 is a heavy-duty, portable BMX rail designed and built to withstand the rigors of even the heaviest street riders. Oversized, steel bases and commercial-grade, rubber feet keep the rail firmly in place while uprights made from square, steel tubing won't allow bases to twist, even without hardware. The super-strong, extruded, center connector has a thick spine featuring tapped threads that won't pull out, plus a reinforcement plate that spans all four connecter bolts for added strength. 8' long by 18" tall assembled, weighs 62 lbs.
Complete wheel from Saltplus. Bullt onto a Saltplus Trapez V2 cassette. this wheel features the tough double wall Mesa rim with straight side walls. ###section### Product Specs WHEEL SIZE: 20" HUB: Saltplus Trapez V2 AXLE: 14mm Chromoly Male DRIVE SIDE: Left & Right Switchable RIM: Mesa Rim SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1236g / 43.59oz
The Mankind Vision Freecoaster Rear Wheel features the Mankind Vision 36H 9t Freecoaster hub with Plastic rear hub guards included and the Mankind Vision welded double wall rim. Completed with Mankind Vision Straight Spokes, Brass Nipples and the Mankind Vision Rim Band. ###section### Product Specs WHEEL SIZE:20" HUB:Mankind Vision Freecoaster AXLE:14mm DRIVE SIDE:Right Side Drive RIM:Mankind Vision SPOKES:Mankind Vision Straight Spokes NIPPLES:Brass WEIGHT:1090 Grams (38.45oz)
The Mankind Vision Freecoaster Rear Wheel features the Mankind Vision 36H 9t Freecoaster hub with Plastic rear hub guards included and the Mankind Vision welded double wall rim. Completed with Mankind Vision Straight Spokes, Brass Nipples and the Mankind Vision Rim Band. ###section### Product Specs WHEEL SIZE:20" HUB:Mankind Vision Freecoaster AXLE:14mm DRIVE SIDE:Left Side Drive RIM:Mankind Vision SPOKES:Mankind Vision Straight Spokes NIPPLES:Brass WEIGHT:1090 Grams (38.45oz)
The Shimano PD-GR500 MTB Flat Race Pedals are an extra wide, low profile style with a concave platform that offers better control, efficiency and secure foot position. Their sturdy metal construction, durable CrMo spindle and low-maintenance, sealed bearing cartridge axle ensure long life and lasting reliability. Height adjustable, bottom-loading replaceable pins add plenty of grip to the pedal. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Metal BEARINGS: Sealed PACK SIZE: 2 (Pair) WEIGHT: 493g
Hand Built right here at Source by BMXers! This Custom Rear Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around Odyssey’s C5 cassette hub which is designed to work either as a right hadn’t drive or left hand drive hub. The hub also comes with plastic non drive side hub guard and male 14mm axle with 9t driver, laced into the Proven Cinema 333 rim for a super reliable cassette wheel.
Description for Profile Elite Titanium Splined Driver with Chromoly Cog 16t not available