Made from CNC'd 6061 Aluminium in the USA. This BMX stem is basically a lighter version of the classic S&M challenger stem designed by Mike Aitken. Available in a choice of colours ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 24mm CLAMPING DIAMETER: 22.2mm WEIGHT: 294g
Race-ready fit designed to accommodate the base layer protection, but long enough to leave no free/open space when knee pads are worn. Flat TLD snap fastener with velcro fastener provides firm closure without additional volume. Lateral waist adjusters with velcro fastener fitted in the waistband. Straight cut for normal freedom of movement.
The all new Kris Fox signature 6061 alloy stem with extensive internal and external machining. Beveled edges and concaved side cut-outs keeps the stem light and very clean looking. Cut-out on top of stem for fork compression bolt to be recessed. ###section### Product Specs TYPE: Front Load REACH: 50mm RISE: 8.5mm CLAMPING DIAMETER: 22.2mm WEIGHT: 283g
The Saltplus Manta Top Load Stem was designed with a super tall rise and a refined top load system. Made from full CNC machined 6061-T6 alloy for unparalleled strength with unique CNC detailing throughout and central bore to shave weight without sacrificing any of that strength. The wide faceplate and STC (Shark Tooth Clamping) pattern within keep your bars securely in place, minimising chances of them slipping. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 33mm CLAMPING DIAMETER: Top Load WEIGHT: 340g (12oz)
At just over 28MM tall the BF Stem sits right between the Fit Bikes Aitken and High-Top stems. With a classic look that doesn’t sacrifice strength with any unnecessary machining. Made in USA. ###section### Product Specs TYPE: 22.2mm REACH: 48/51mm RISE: 28.66mm (upright), 2.84mm (inverted) CLAMPING DIAMETER: Top Load WEIGHT: 280g (9.9oz) - 315g (11.1oz)
Clint Reynolds and Co. wanted to tweak S&M's classic challenger stem to better suit their style of riding, the result? The Turtleneck. A 6061-T6 aluminium, CNC machined stem that's a little longer and narrower than the Challenger with an internal cutout that lightens it up. Its got a 52mm reach with a 24.5mm rise which can be inverted to 7mm. ###section### Product Specs TYPE: 22.2mm REACH: 52mm RISE: 24.5mm CLAMPING DIAMETER: Top Load WEIGHT: 357g (12.6oz)
Top-load 6061 alloy stem with internal and external machining to reduce weight. Beveled edges and top cut-out for fork top cap to be recessed. Narrowed design for weight and a clean look. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE: Top Load REACH: 50mm RISE: 35mm CLAMPING DIAMETER: 22.2mm WEIGHT: 363g
Van Homan signature stem from Fitbikeco, Made in the USA & with a Little Devil logo/Fit engraved on the side you couldn’t ask for more. ###section### Product Specs TYPE: Top Load REACH: 53mm RISE: 28.5mm CLAMPING DIAMETER: 22.2mm WEIGHT: 341g
Say hello to the Sano V2 Featherweight edition. With the same clean and classic looks as the original, Shadow refined the Sano V2, creating the ultimate in high end stopping. Lighter weight, more tyre clearance, improved hanger, and now front brake compatible.
Description for Stay Strong V1 Race Shorts - Black/Black 38 not available
Ty Morrow's signature handlebars from Eclat. The Morrow bars are made from full liquid post heat-treated seamless 4130 crmo. They feature a 10" rise. Over sized 1 tube at stem clamping area, must be used with an Oversized stem. ###section### Product Specs Rise: 10" Width: 30.15" Up Sweep: 3 ° Backsweep: 11 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 312g / 0.68lbs ###section### ###shogun-image-section###
Description for Stay Strong V2 Race Shorts - Black/White 28" not available
The Hulk bars are made TruTherm post weld heat treated 4130 chromoly and feature multi butted tubing for maximum weight to strength ratio. Rise: 10". ###section### Product Specs Rise: 10" Width: 30" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 825g / 1.82lbs ###section### ###shogun-image-section###
The 8.75 Dan Lacey bars feature an embossed F Federallogo on the cross bar and are made from 20/20 heat treated 13 butted tubing. ###section### Product Specs Rise: 8.75" Width: 29.3" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 766g / 1.69lbs ###section### ###shogun-image-section###
The Grime Oversized Bar is the Denim Cox signature handlebar from BSD. Constructed from heat-treated multiple butted 4130 chromoly. Heavyweight street aesthetic without being heavy weight. BSD OS Gorilla Grip system. The stem clamping area diameter is increased from 7/8 (22.2mm) to 1 (25.4mm). This increase in diameter gives 14% more clamping area than on regular 7/8 handlebars, so when youre nose diving down a 12 set your bars are less likely to slip. ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 2 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: 754g / 1.8lbs ###section### ###shogun-image-section###
One of the newest members of the Wethepeople Pro team Dan Kruk now has his own signature bars, If these are strong enough for Dan then these will withstand any abuse! PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Wethepeoples Hydra 25.4mm stem) and will not be compatible with a traditional 22.2mm stem. Rise: 9.25" ###section### Product Specs Rise: 9.25" Width: 28.5" Up Sweep: 2.6 ° Backsweep: 11 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 854g / 1.78lbs ###section### ###shogun-image-section###
Jordan Godwin signature oversized handlebars from Eclat. The Chocolate bars are made from full liquid post heat-treated seamless 4130 crmo. Available in 9" rise. ###section### Product Specs Rise: Multiple Options Width: 27.75" Up Sweep: 1.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 860g / 1.89lbs ###section### ###shogun-image-section###
The Stay Strong V2 Top Line 1-1/8" Stem utilises a top load design with a fully CNC machined alloy construction. Its cut-out/through design cuts down the overall weight of the stem without sacrificing any of its strength. The Top Line Stem also features heat-treated M6 bolts and 31mm CNC'd compression bolt recess with laser etched Stay Strong logos adding the finishing touch. ###section### Product Specs TYPE: 22.2mm REACH: 35-60mm options RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: 290g (10.2oz)
Complete Stay Strong x Bengal disc brake system. Kit includes, Lever, Cable and Caliper. Rotor and bolts. All Stay Strong designed and branded. Designed for BMX using a 120 rotor. Fluid - Mineral Oil.
Guard version of the Animal V4 BMX sprocket. This sprocket is machined in the USA from 7075 aluminum for maximum strength, featuring 6 triangular cutouts for weight savings, 1/8" teeth and a 15/16" bore with 19mm adapter. ###section### Product Specs TYPE: Bolt on MATERIAL: Alloy WEIGHT: 5.01oz - 6.03oz