Comfort, performance, protection, and storage. Designed for gravel but equally at home for adventure, endurance, or if you just love pockets. High-compression 215 g Forza 2 fabric with 32% Lycra® content provides exceptional muscle support and compression Dyneema® side panels to protect in the event of a tumble, 15x stronger than steel Progetto X2 Air seamless seat pad is soft against the skin but well padded for long-distance comfort Minimalist bib straps allow maximum airflow, while a reinforced yoke keeps the straps flat over the shoulders 2 rear mesh pockets Large compression pocket on each leg Raw-cut edge at waist for extra stretch and comfort Raw-cut leg ending engineered to stay put without silicone grippers This is the no-compromise gravel or endurance MTB short. It combines the best features of Castelli's premier race short, the Free Aero RC Bibshort, with Dyneema® side panels for protection in case of a fall, and four pockets for storage. It's made first and foremost for riding comfort. It uses the top-of-the-line Progetto X2 Air seamless seat pad that provides progressive damping and the softest, stretchiest skin contact layer available. The Forza 2 fabric provides just the right level of compression and muscle support for your longest rides. The comfort is further enhanced by the minimalist Free bib straps — less material to keep you cooler, but just enough to keep your short in place. At the leg ending there's a raw-cut edge that you'll hardly feel, and the combination of the Forza 2 fabric with just the right length and circumference means that no silicone gripper is required. It's a big leap forward in terms of comfort. The two large leg pockets are lined with an extremely light and fast-wicking fabric so you won't notice the extra layer, yet they hold a surprising amount of gear. The two mesh pockets at the lower back mean you have enough storage space that you can forgo a traditional pocketed cycling jersey. The Unlimited short really does know no limits.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
The perfect jacket for mild winters or for the rider who tends to overheat, this piece features our warmly insulated GORE-TEX INFINIUM™ WINDSTOPPER® fabric on the front and sleeves, while the back forgoes the membrane to let moisture escape. It's a non-race-fit jacket to fit most body shapes. GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast fabric with fleece liner on upper chest and sleeve front GORE-TEX INFINIUM™ WINDSTOPPER® Mid with lightly brushed inside on lower front Reflective panel on chest Warmer back allows heat and moisture to escape Reflective heat transfers on pockets for maximum visibility 3 rear pockets YKK® Vislon® zipper. The Mortirolo Jacket has been designed to be a warm, cozy jacket on cool days while preventing overheating and moisture buildup inside the jacket. Choose this jacket for riding in cool but not frigid temperatures, or for high-intensity rides or if you tend to sweat a lot. This jacket excels in a wide range of conditions as long as it's not bitterly cold or raining. It's the combination of the right fabrics and construction that make it work so well. You get coldest on the upper chest and arms, so we use our GORE-TEX INFINIUM™ WINDSTOPPER® X-Fast three-layer fabric with a luxurious fleece inside for extra warmth. The lower part of the front is in our mid-weight GORE-TEX INFINIUM™ WINDSTOPPER® fabric with a lightly brushed inner face. Both of these fabrics provide 100% wind protection, excellent splash protection, and best-in-class breathability. The back is in our brushed fleece 100% polyester Warmer fabric with superior wicking. It's not windproof, so it lets a lot of moisture escape. You stay drier and therefore warmer and more comfortable. The jacket has a neutral fit. It's not too racy, so there's room for an extra layer underneath, but it's certainly not going to flap in the wind.
Introducing the Next Generation of Sport Performance Sunglasses. The new collection launches in two powerful styles running on all cylinders. Westcraft + Eastcraft fit our definition of immense beauty, equal parts elegance and performance. This perfect blend of style and high fashion with the ultimate sport performance sunglass gives what you need without compromises. The collection has a distinct aviator silhouette design and comes in two versions, the refined round Westcraft and its square sibling, the Eastcraft High-impact and scratch-resistant 5.5-base cylindrical lens for increased peripheral view and protection 100% UV protection (UV400) and with HYDROILO lens treatment to repel water, dirt and oil Every lens color offered is available in both shield and dual lens configurations through our Replacement Lenses Program Durable, flexible and lightweight TR90 frame Removable side shields for additional protection from the elements Comes with a hard case, microfiber cleaning bag, clear dual replacement lenses and extra alternative fit nose padsColour Grey
The Castelli Nano Flex Pro 2 Bibtight features an all-new fabric - Nano Flex Xtra Dry for the best performing wet-weather non-membraned fabric yet this amazing fabric is also better in dry conditions too. Nano Flex Xtra Dry features an even tighter weave double layer construction combined with an improved water-repellency treatment to really push the boundaries of weatherproof woven fabric. Xtra Dry isn't totally waterproof but it is currently the best fabric around for wet weather legwear and the best bit is that it isn't compromised in dry weather making these the perfect winter tight. Constructed with water repellency at the forefront the minimal seams are placed in such a way to help the Pro tights remain as watertight as possible. The bum is in a double layered fabric for extra protection as this is in direct line of rear wheel spray. The lower legs incorporate fully waterproof shin guard panels in a highly reflective material. These shrug off road spray and are a valuable safety aid. Wear them over your shoe covers for maximum effectiveness. Given its Pro status, it's not surprising to learn that these tights also incorporate the excellent gel padded Progetto X2 Air seat pad. Key Features Nano Flex Xtra Dry fabric brings higher levels of water protection and warmth Double face knit keeps you warmer because less wind comes through Reflective waterproof splash guards on the inside of lower legs Double layer seat protects from rear wheel spray Fewer seams to limit water ingress Lie flat bib construction Progetto X2 Air pad for long days in the saddle Sizes men's S-3XL Weight 376g(L) Castelli comfort range 0-12C
FOR BBRIGHT SPECIFIC FRAMES. CONVERT TO 24MM AXLE Rotor Pressfit30 PF30 4630 Ceramic Bottom bracket available from Velotech Services For use with BBRight 46mm systems to convert down to 24mm axle systems. This can be used with cervelo BBRight frames for Rotor 3D & Agilis cranks.
Long winding descents and race-day lead-outs, the Smith Trace is all about versatility. Road, gravel or bikepacking, this bike helmet pairs complete Koroyd® with MIPS® for protection you can trust if the route gets hairy. And when the day heats up, you'll stay cool thanks to internal air channels with intake and exhaust ports that keep the air flowing. Side channels let you securely stash your sunglasses when you don't need them, and when you do, our AirEvac™ ventilation system prevents them from fogging up. Protection Complete Koroyd® coverage for lightweight, energy-absorbing and ventilated impact protection MIPS® Brain Protection System reduces rotational forces caused by angled impacts to the head Integrated skeletal structure creates a roll cage for added strength and impact protection CPSC and CE EN 1078 certified Fit / Integration Designed for ultimate integration with Smith performance eyewear for maximum comfort, venting and storage convenience AirEvac™ ventilation system integrates with Smith eyewear for fog-free lenses VaporFit™ dial adjustment system offers 270-degree fit adjustment with the turn of a dial Features 18 fixed vents for consistent airflow XT2® antimicrobial lining offers sweat-activated odor control Lightweight, low-bulk single layer webbing Light mount compatible Weight (Size M, MIPS®): 10 oz / 280 g
Long winding descents and race-day lead-outs, the Smith Trace is all about versatility. Road, gravel or bikepacking, this bike helmet pairs complete Koroyd® with MIPS® for protection you can trust if the route gets hairy. And when the day heats up, you'll stay cool thanks to internal air channels with intake and exhaust ports that keep the air flowing. Side channels let you securely stash your sunglasses when you don't need them, and when you do, our AirEvac™ ventilation system prevents them from fogging up. Protection Complete Koroyd® coverage for lightweight, energy-absorbing and ventilated impact protection MIPS® Brain Protection System reduces rotational forces caused by angled impacts to the head Integrated skeletal structure creates a roll cage for added strength and impact protection CPSC and CE EN 1078 certified Fit / Integration Designed for ultimate integration with Smith performance eyewear for maximum comfort, venting and storage convenience AirEvac™ ventilation system integrates with Smith eyewear for fog-free lenses VaporFit™ dial adjustment system offers 270-degree fit adjustment with the turn of a dial Features 18 fixed vents for consistent airflow XT2® antimicrobial lining offers sweat-activated odor control Lightweight, low-bulk single layer webbing Light mount compatible Weight (Size M, MIPS®): 10 oz / 280 g
Shimano GRX, with its gravel specific ergonomics, optimized gearing options, rugged reliability, and quiet and stable drivetrain, sets itself apart from the rest of the component world The HollowTech II 11-speed single chainset offers optimum gearing for mixed terrains and riding styles Designed to work with HollowTech II type bottom bracket cups Compatible with 11-speed HG chains Anodized aluminium crank arms Lightweight aluminium chainring 4 arm, 110 mm bolt circle diameter Weight: 644 g (40T), 656 g (42T) for 170 mm
The Rincon™ combines a supple, breathable Synchwire™ upper with a stout carbon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won’t de-laminate or break down. A supportive 3D molded footbed with Aegis® anti-microbial treatment enhances comfort and fit, which is adjustable via a single BOA® L6 dial featuring 1 mm adjustment and and an adjustable forefoot strap. It’s a great choice for riders looking for inspired performance that’s capable on the course or Off the-beaten track. Upper: One-piece Synchwire™ upper with thermo-bonded exo-structure Rubber reinforced heel and toe sections BOA® L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides Reflective heel tab Outsole: Nylon-composite 2-bolt plate with dual-injected rubber outsole Stainless steel hardware Footbed: 3D Molded footbed with medium arch support Weight: 340 grams
Designed to get you “out” for a ride for those times you simply can’t get out. Whether you’re craving a technology-free trainer session or a ride with your virtual crew, the Mag Smart Equipped can help you tally the miles. Our easy-to-store, foldable trainer frame features an adjustable linear resistance unit with five levels and comes with a speed sensor that can be used for any virtual – or non-virtual – training ride. For use with your favorite indoor cycling app, install the speed sensor on the rear wheel of your bike, mount your bike to the Mag bike trainer, connect via Bluetooth or ANT+ and prepare to sweat. Product Features: Magnetic resistance unit provides a quiet and frictionless ride. Linear resistance boosts workout intensity to match each pedal stroke and gear click. Included speed sensor connects you with indoor cycling apps In the box: Mag Smart Equipped Bike Trainer Dual-band magnetless speed sensor Specifications: Eccentric leveling feet allow for easy adjustment on uneven surfaces. Comes on a sturdy, foldable frame. Adjust tire fit to resistant unit with a convenient turn knob. Resistance unit roller allows for 700c, 26 , 27 and 29 wheel sizes – up to a 2.0 tire. This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and is compatible with rear dropout spacing: 120mm, 130mm and 135mm. Trainer tire recommended. Compatible with indoor cycling apps. Trainer is tested to the combined weight (rider and bike) of 300 lbs. Trainer skewer included. Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. Noise level at 20 mph is 72-76 decibels.
The Planche des belles filles women’s bibshorts are created using both Thuderbike Power and Monica Lycra, finished with a raw-cut elastic gripper around both legs and a highly breathable, reinforced mesh fabric for the braces. The GILevo seat pad is created with gel inserts offering superb impact protection. The design was created to honour the first Tour de France Femme avec Zwift. The folklore connected to the regions ancient past provided us with plenty to work with. Legend states that during the Thirty Years’ War, young women from the local area fled into the mountains to escape invading mercenaries as they feared being massacred. Rather than surrender, they decided to jump into a lake far below.
Unbeatable comfort bib shorts made with compression Thunderbike Power fabric and featuring light and soft Polartec®’s Delta fabric for rapid drying and great breathability. GITEVO chamois with gel core. Ideal for hot summer days. The clean, contemporary design of our bib shorts draws influence from the distinctive blue and yellow colours of the regions flag, and the iconic Victory Cross emblem synonymous with Principality of Asturias. Perfect Fit: Thunderbike Power Compression Fabric With Printed Leg Gripper To Keep The Bib-shorts In Place Extreme Comfort And Breathability: Bibs Made With Polartec®’s Delta Fabric For A Fast Transmission Of Sweat To The Outside, Guaranteeing Rapid Drying And Great Breathability Anti-shock Protection: Gitevo Chamois With Gel Core To Absorb Shocks Steadily And Gradually For Comfort On Long Rides