The evolution of speed; the 100% Speedtrap's expansive frame geometry increases peripheral vision and protection whilst offering the best possible peripheral vision of any full frame glasses. We deliver this enhanced vision and clarity by following the natural contours of your eye with a custom optically correct decentred 6-base cylindrical shield lens. Further enhancements include integrated cooling vents and three-way adjustable temple arms for uncompromising fit... The result is ultimate visual performance paired with 100%'s unmistakably aggressive futuristic styling. In The Box Hard case Microfiber cleaning bag Clear replacement lens Extra alternative fit nose pad Features Lenses are highly impact and scratch-resistant with 100% UV protection (UV400) and HYDROILO lens treatment to repel water dirt and oil Shatterproof and lightweight Grilamid TR90 frame with Ultra-grip rubber nose pads and tips for the secure fit essential in racing situations Available with 100%'s premium HiPER lenses as well as standard versions and all models include an additional clear lens for low-light situations Comes with a custom hard case an alternative fit nose pad and a 100% branded storage and cleaning bag
The evolution of speed; the 100% Speedtrap's expansive frame geometry increases peripheral vision and protection whilst offering the best possible peripheral vision of any full frame glasses. We deliver this enhanced vision and clarity by following the natural contours of your eye with a custom optically correct decentred 6-base cylindrical shield lens. Further enhancements include integrated cooling vents and three-way adjustable temple arms for uncompromising fit... The result is ultimate visual performance paired with 100%'s unmistakably aggressive futuristic styling. In The Box Hard case Microfiber cleaning bag Clear replacement lens Extra alternative fit nose pad Features Lenses are highly impact and scratch-resistant with 100% UV protection (UV400) and HYDROILO lens treatment to repel water dirt and oil Shatterproof and lightweight Grilamid TR90 frame with Ultra-grip rubber nose pads and tips for the secure fit essential in racing situations Available with 100%'s premium HiPER lenses as well as standard versions and all models include an additional clear lens for low-light situations Comes with a custom hard case an alternative fit nose pad and a 100% branded storage and cleaning bag
Featuring UltraCarbon™ technology 100%® frameless Hypercraft® sunglass is lighter stronger and more dynamic than any performance shield on the market. Feel Nothing. See Everything. Designed in California Superior optics with Ultra HD lenses made from crack and chemical resistant material 5.5-base cylindrical shield lens for increased peripheral view and protection 100% proprietary UltraCarbon™ material for a durable strong and lightweight frame 100% UV protection (UV400) Scratch-resistant lens coating of the highest quality Streamlined Laser Cut Rimless Shield with superior ventilation positioned with aerodynamic angles Hydrophobic and oleophobic lens treatment repels water dirt and oil Temple arm scoops to manage moisture Available with contrast-defining HiPER® lens and photochromic lens Complete full-spectrum UV protection including UVA UVB and UV400 wavelengths Ultra-grip rubber nose and temple tips provide a secure fit Ultra-lightweight of 23 grams offers ultimate performance with minimal weight Comes with a hard case microfiber cleaning bag clear replacement lens and extra alternative fit nosepad
Game-Changing Women’s Winter Bibtight with unique Drop Seat Function. 4-way high stretch windproof breathable fabric with DWR finish front and seat panels PFC-Free non-toxic durable water repellent finish Women’s 800 Series Conform EGM Pad with medical grade Elastomer technology* Ergonomic pre-shaped multi panel construction New bib construction combining wide elastic crossover back straps and supportive high wicking insulating front panel Innovative discreet zip-free and unique Drop Seat fast comfort break access 90 Day Satisfaction Guarantee *Contains Zinc Pirythione anti-microbial Biocidal finish which prevents the multiplication of odour-causing bacteria Construction Polyester 57% Nylon 32% Elastane 11%
This is the first seatpost that’s compliant AND aerodynamic—a total win win. We initially developed the Pavé seatpost for the all-new Roubaix and it’ll make a fantastic addition to your Tarmac SL6. Of course it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options. FACT carbon construction paired with a D-shaped seatpost that’s compatible with the 2020 Roubaix and Taramc SL6. Engineered to have the saddle move in a perfect arc aka a back & downward motion. Setback: 20mm/0mm Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. Length: 380mm/450mm Approximate Weight: 209g
High performance trail-conqueror. All new Tallac combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. Tallac BOA® uses the BOA® Fit System for a fast effortless and precise fit with strong flexible and low-friction textile TX4 Laces. The Cordura® upper is breathable and lightweight but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. FEATURES MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. BOA® Fit System with flexible low-friction textile TX4 Laces expertly configured for performance. Hook and loop strap for additional forefoot adjustment. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
High performance trail-conqueror. All new Flume combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. Flume BOA® uses the BOA® Fit System for a fast effortless and precise fit with strong flexible and low-friction textile TX4 Laces. The Cordura® upper is breathable and lightweight but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. FEATURES MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. BOA® Fit System with flexible low-friction textile TX4 Laces expertly configured for performance. Hook and loop strap for additional forefoot adjustment. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
As used by the professionals the ME7 is back and badder than ever. Fresh upper panelling for better ventilation less water absorption and quicker drying time Essentially bomb-proof secure and reliable low-profile buckle and quick-lace closure Brand new MICHELIN® OCX3 sole compound for improved grip and durability Neoprene rubble-cuff to keep the grit out TORBAL™ midsole allows natural lateral movement of the heel while maintaining pedalling efficiency at the cleat Weight: 380g (size 42) Stiffness rating: 8 PRODUCT SPECIFICATIONS MODEL NO SH-ME702 SERIES SHIMANO Model year 2021 Line up year 2023 Gender Men's Segment/Category OFF ROAD/Trail / Enduro Product name ME7 Color Olive Black Size Standard: 38 - 50Wide: 38 - 48 Cleat type SPD Last type VOLUME+ Stiffness index 8 Best match pedal PD-M9120 Features_Mid foot cleat adjust range ✔ Features_Sealed lace/dials upper structure ✔ Features_Carbon sole/Mid sole ✔ Technology_MICHELIN ✔ Technology_TORBAL ✔ Closure Buckle + Speed lacing Upper Material Synthetic leather Outsole Material Michelin Rubber Midsole Material Carbon fiber composite Men's Actual weight (Size: 42) 400 g
The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Mallet E Weight (per pair) 419g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Pins 12 pins per pedal Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
Crankbrothers have released a range of shoes to Match their pedal system. The Mallet BOA is the perfect pair to combine with Mallet DH pedals and hit the trails.Featuring an additional 5mm length track length for a slammed back cleat position for control and stability when dropping the heels when the taking on the most aggressive trails. Upper BOA Fit System & Strap for micro-adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Race zone cleat placement for control and stability. Ramp for easy clip-in / clip-out and mud clearance. Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Shoes designed to match crankbrothers pedal ranges. Mallet E is designed to be ideal for big days out on the bike. They combine a stiff shank for pedalling efficiency with a ramped toe and grippy tread making them ideal for hike a bike situations. Combine with the Mallet E or Mallet E long spindle pedals. Upper BOA Fit System & strap for micro-adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Ramp for easy clip-in / clip-out and mud clearance Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
There are days and races where you’re out there for longer. And as the clock ticks towards 10 15 or more hours traditional vests and belts just don’t hold all you need. With its secure pockets and 12 + 3L capacity the new ultra-stable Ultrun S Pack 15 trail running backpack gives you that much-needed space to carry extra nutrition and equipment on long adventures and ultra-marathons. On the front two easy-to-reach mesh pockets hold soft flasks with dedicated drink valve tabs to reduce movement. Smaller pockets on the straps securely hold keys energy gels or used wrappers. Stow your gloves headband and more food in the larger lower compartments which close safely with Velcro and can be easily accessed thanks to convenient tabs. A diagonal zipped pocket on the left-hand side keeps your phone within hands reach to check the route or keep in touch with your support crew. At the rear another zipped pocket holds all compulsory essentials you don’t often pull out such as ID money or survival blanket. A secure pouch carries a hydration bladder with dedicated loops to feed drink valve through. The two large overlapping pockets stretch to accommodate mandatory clothing and equipment and the elastic “Z” strap gives you bonus capacity on the outside of the pack for a jacket or rain cover. Outer silicone toggles keep retracted poles out of the way when the trail doesn't require them. True to our standards the vest is highly-breathable and ergonomic with soft seams for unmatched comfort. Foam inserts on the front prevent any rubbing on the ribcage as the hours wear on. Adjustable side straps can be pulled tighter for added stability on technical sections while the front self-locking zip can be opened during climbing for extra breathability. Reflective strips provide improved visibility in low light conditions and the included whistle means you can head out with full peace of mind. Tested and developed out on the trail with runners of all levels the Ultrun S Pack 15 is designed to bring functionality comfort and performance to all your long distance challenges. Sold with 2x 500ml flasks. Features Large 15L (12 plus 3L) capacity to carry all equipment and nutrition on long distance trail runs Secure pockets with easy-access tabs Ergonomic and stable for optimal comfort as the hours pass on the trail Hydration bladder pocket Elastic on rear to carry larger items eg waterproofs Pole loops for carrying when not in use 2 x 500ml ergo flasks included
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders. The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 479g per pair Platform: Extruded/machined aluminium Wings: cast stainless steel Spring: 300 series spring stainless steel Spindle: Forged scm435 chromoly steel Q-factor: 57mm Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal Traction pins: 8mm adjustable Excellent mud-shedding: using the very open designed pedal platform Dual chamfered edges to reduce rock strikes Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
The ultimate pedal for enduro racing and riding. The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Specification Weight (per pair): 419g Spindle: Forged scm 435 chromoly steel Body: 6061-T6 aluminium Wings: 17-4PH stainless Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Pins: 12 pins per pedal Cleats: Premium brass cleats included Release angle: 15° or 20° Warranty: 5 years
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
Head tube reamer 1 1/8" (34 mm) complete with reamerCyclus Tools special tool to face 1 1/8" (34 mm) head tubes.The head tube reamer creates coaxially exact plane cup seats on the head tube.max. head tube length: 190mm max. milling depth: 15mm max. wall tube thickness: 4 mmUseFirst remove the conical guide from the spindle.Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring.Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise while taking the tool out of the head tube.Repeat the above steps to ream the bottom side of the head tube.TipBefore reaming remove evetually existing chrome plates on the frame to avoid early abrasion of the reamer.After reaming you might need to remove sharp edges with file.After the use clean the reamer and keep it in a safe place.
Seca 2000 is the ultimate bike light for dedicated cyclists whether competing in 24 hour races or sneaking in a ride after work - the Seca’s balance between: brightness beam pattern weight and features is unprecedented. Featuring:• 2000 Lumen Output Certified to the FL-1 Standard• A 4 LED array using the highest-level CREE LEDs and enhanced firmware.• Custom engineered bi-conic reflector optimizes the light to provide a smooth even beam pattern with a wide far-reaching spread of light that focuses the light where you need it.• Beam pattern was engineered to maximize riders’ depth perception with optics that eliminate the snowball effect without wasting any light.• Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours.• Daytime Pulse mode• Universal tool-free mounting system.• Includes Helmet Mount and GoPro Mount Interface• Illuminated Power Button• Ultralight Aluminum cooling fins• Recharge the 3 Cell Li-ion battery in 2.5 hours with the Mini-L 1.5 Charger• Low battery warning and auto shut-off to prevent damage• Multiple power settings with cruise and secondary race modeo High 1:30 / 2000o Med 3:00 / 1000o Low 6:00 / 500o Pulse 12:00 / 500o Race High 1:30 / 2000o Race Low 3:00 / 1000• System weight: 343 grams• Designed and assembled in California.• Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee
The perfect pair of bags for any adventure: you’ll be astonished at how much gear fits in the ORTLIEB Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable high quality Cordura fabric provides optimal protection against water dust and abrasion.Thanks to the proven QL2.1 system with self-closing hooks attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way no matter what the weather! FURTHER FEATURES: + QL2.1 mounting system for all bike racks with tube diameters of up to 16 mm+ special inserts allow you to reduce the size of the rack hooks to 12 10 or 8 mm+ 3M Scotchlite reflectors+ shoulder strap with carabiner hooks+ dust guard with an easy-to-operate drawstring cord under the flap+ inside pocket Recommended by magazine RADTOUREN (GER) 02/13 MATERIAL PS36C BAG TYPE pair ADAPTER Quick-Lock2.1 INSTRUCTIONS Download DATASHEET Download 360° VIEW 360° View WEIGHT 2x 1100 g | 38.8 oz HEIGHT 42 cm | 16.5 inch UPPER WIDTH 32 cm | 12.6 inch LOWER WIDTH 23 cm | 9 inch DEPTH 22 cm | 8.7 inch VOLUME 2x 21 l | 1281.5 cu.inch PROPERTIES mig nopvc ip54 ql21 pair