Our top-level carbon-soled cycling shoes are designed for adventures. These replacement pads are easy to install and bring your shoes back to original spec so you can keep on movin'. For all EC90 SLX EC90 ACC and EC70 outsoles. Found on Empire SLX Empire ACC Factor ACC Factress ACC Trans E70 and Espada E70 shoes. Kit comes with left and right replacement pads and includes hardware.
The Torch 2.0 Road shoes are all about comfort—well comfort and performance that is. Due to the materials road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on though. To do so we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability while also providing simple on-the-fly micro-adjustments.Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power increase efficiency and reduce chance of injury by optimizing hip knee and foot alignment.Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff yet light with a rubber heel and toe for off-the-bike traction.Lightweight Boa® IP1 dial closure for on-the-fly micro-adjustment backed by the Boa® Lifetime Guarantee.Mesh and TPU upper for a supple fit.Three-bolt cleat pattern fits all major road pedals.Approximate weight: 235g (1/2 pair Size 42)
From the outset of the Torch 3.0 Road shoe design process our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge however was pulling this off at a palatable price. In order to achieve this we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup meanwhile lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure and a precise fit that leads to all-day comfort. Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power increase efficiency and reduce chance of injury by optimizing hip knee and foot alignment. FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. Dual Boa® S2-SV Snap dial closure for on-the-fly micro-adjustment backed by the Boa® Lifetime Guarantee. Mesh TPU and synthetic layer upper are placed in specific zones for comfort and lock-down and are thermobonded for a superior fit. Standard Fit for support and all-day comfort. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 248g (1/2 pair Size 42)
Take the performance and Body Geometry ergonomics of our high-end road shoes put them in an affordable design and you basically have the Torch 1.0 Road shoes. For the closure we added a single lightweight Boa® L6 dial that features tool-free snap replacement capability while also providing simple on-the-fly micro-adjustments. Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power increase efficiency and reduce chance of injury by optimizing hip knee and foot alignment. With a 6.0 Stiffness index the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. Lightweight Boa® L6 Fit System for on-the-fly micro-adjustment backed by the Boa Guarantee. Synthetic upper with for supple feel over the foot. Reflective heel elements increase your visibility to motorists in low-light conditions. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 290g (1/2 pair Size 42)
From the outset of the Torch 3.0 Road shoe design process our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge however was pulling this off at a palatable price. In order to achieve this we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup meanwhile lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fibre sole to further ensure an efficient power transfer. Finally we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure and a precise fit that leads to all-day comfort. Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power increase efficiency and reduce chance of injury by optimizing hip knee and foot alignment. FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. Dual Boa® S2-SV Snap dial closure for on-the-fly micro-adjustment backed by the Boa® Lifetime Guarantee. Mesh TPU and synthetic layer upper are placed in specific zones for comfort and lock-down and are thermobonded for a superior fit. Standard Fit for support and all-day comfort. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 248g (1/2 pair Size 42)
Combining the classic look of a lace up with modern sole technology the Tour Road provides performance at a tremendous value. Our supportive nylon composite sole integrates a stiff carbon plate at the ball of the foot to maximize power transfer with the flexibility to run either two bolt SPD or three bolt SPD-SL cleats. The fully bonded seamless upper construction creates a slipper like fit that is highly adjustable thanks to the traditional lacing system. An additional set of laces is included in the box so you can choose to add a pop of color or opt for subtle style Seamless upper offers exceptional comfort and avoids hot spots by adapting to your unique foot shape Traditional lace closure for a precise fit and all-day comfort Lace lock provides a safe place to stash your laces to keep them free of your drivetrain 1:1® Composite Power Plate with carbon fiber forefoot insert provides lightweight stiffness and durability (stiffness rating 8) Plate features Direct-Vent technology for cooling and drainage 3-bolt SPD-SL and 2-bolt SPD compatible Weight: 270 grams / 9.5 oz.(size 43)
When the moment comes for an attack in the hills a long solo move or a full gas sprint for the line every watt counts which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new patent-pending closure system Dyneema®-reinforced toungless sock and ultra-stiff FACT Powerline™ carbon outsole eliminate foot roll reduce pressure on tendons and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made and at the finish line that’s all that matters. The key to more comfort less injuries and higher power output comes from our ergonomically designed scientifically tested Body Geometry features—Longitudinal Arch Varus Wedge and personalized insoles with a Metatarsal Button. When used in harmony these three features align the hip foot and knee while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. Patent-pending closure design secures the foot for extreme out-of-saddle efforts locking the metatarsals and preventing lateral roll. Dyneema® is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. Our stiffest and lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 15. Independent BOA® Li2 Fit System for on-the-fly micro-adjustment backed by the Boa® Guarantee. PadLock™ heel construction cradles the heel and is proven to improve acceleration. Non-slip replaceable heel tread with internally recessed screws for security. Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. Approximate weight: 220g (1/2 pair Size 42)
When the moment comes for an attack in the hills a long solo move or a full gas sprint for the line every watt counts which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new patent-pending closure system Dyneema®-reinforced toungless sock and ultra-stiff FACT Powerline™ carbon outsole eliminate foot roll reduce pressure on tendons and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made and at the finish line that’s all that matters. The key to more comfort less injuries and higher power output comes from our ergonomically designed scientifically tested Body Geometry features—Longitudinal Arch Varus Wedge and personalized insoles with a Metatarsal Button. When used in harmony these three features align the hip foot and knee while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. Patent-pending closure design secures the foot for extreme out-of-saddle efforts locking the metatarsals and preventing lateral roll. Dyneema® is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. Our stiffest and lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 15. Independent BOA® Li2 Fit System for on-the-fly micro-adjustment backed by the Boa® Guarantee. PadLock™ heel construction cradles the heel and is proven to improve acceleration. Non-slip replaceable heel tread with internally recessed screws for security. Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. Approximate weight: 220g (1/2 pair Size 42)
From the outset of the Torch 3.0 Road shoe design process our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge however was pulling this off at a palatable price. In order to achieve this we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup meanwhile lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fibre sole to further ensure an efficient power transfer. Finally we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure and a precise fit that leads to all-day comfort. Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power increase efficiency and reduce chance of injury by optimizing hip knee and foot alignment. FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. Dual Boa® S2-SV Snap dial closure for on-the-fly micro-adjustment backed by the Boa® Lifetime Guarantee. Mesh TPU and synthetic layer upper are placed in specific zones for comfort and lock-down and are thermobonded for a superior fit. Standard Fit for support and all-day comfort. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 248g (1/2 pair Size 42)
The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot knee and ankle alignment going fast never looked so good. By utilizing laces the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime supple fit. The S-Works 7 Lace fits like a leather glove but you know for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline™ carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock™ heel comfortably holds the rear of your foot while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe a lightweight climber or a supple and adaptive fit that compliments your race shoe the S-Works 7 Lace marries classic style to race-winning heritage and performance. Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power increase efficiency and reduce the chance of injury by optimizing hip knee and foot alignment. Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. Our stiffest and lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 15.0. Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. PadLock™ heel construction cradles the heel and is proven to improve acceleration. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Non-slip replaceable heel tread with internally recessed screws for security. Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. Three-bolt cleat pattern fits all major road pedals. Approximately 236g per shoe (size 44
What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7 you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline™ carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to our lightest and stiffest carbon outsole to date. A completely refined Padlock™ Heel meanwhile packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally the space-grade Dyneema™ material used in the upper doesn’t stretch when pulled on making sure that your foot stays where it’s supposed to. With these all features combined you can be sure that we’ve kept in line with the motto “every watt is sacred.” In the comfort arena we kept all of the Body Geometry features you know and love like the Longitudinal Arch Varus Wedge and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works 7 to have form that complements its function so you'll find seams that are bonded together rather than sewn cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC’d alloy BOA® dials also add some panache but they also feature durable spring clutch internals and precise one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything we know about footwear compacted into one shoe–no compromises no shortcuts just explosive speed and superior comfort. Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power increase efficiency and reduce the chance of injury by optimizing hip knee and foot alignment. Our stiffest and lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 15.0 Dyneema® Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. Independent alloy BOA® S3-Snap dials for on-the-fly micro-adjustment backed by the BOA® Lifetime Guarantee. PadLock™ heel construction cradles the heel and is proven to improve acceleration Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Non-slip replaceable heel tread with internally recessed screws for security. Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. Three-bolt cleat pattern fits all major road pedals. Approximate weight: 224g (1/2 pair Size 42)
From the outset of the Torch 3.0 Road shoe design process our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge however was pulling this off at a palatable price.In order to achieve this we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup meanwhile lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fibre sole to further ensure an efficient power transfer. Finally we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure and a precise fit that leads to all-day comfort.> Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power increase efficiency and reduce chance of injury by optimizing hip knee and foot alignment> FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.> Dual Boa® S2-SV Snap dial closure for on-the-fly micro-adjustment backed by the Boa® Lifetime Guarantee.> Mesh TPU and synthetic layer upper are placed in specific zones for comfort and lock-down and are thermobonded for a superior fit.> Standard Fit for support and all-day comfort.> Three-bolt cleat pattern fits all major road pedals.> Approximate weight: 248g (1/2 pair Size 42)