Shimano RC3 Road ShoesWhether dipping your toes into the world of bike racing, tackling tough sportives or enjoying far-flung two-wheeled biking adventures, the RC3 Road Shoes ensure pedalling comfort and efficient power transfer. While sitting at an entry-level price point, the RC3 Road Shoes deliver the fit, comfort and efficient performance normally reserved for higher-priced shoes. This is thanks to technology first developed and deployed on the pro-level S-PHYRE shoes. This has now trickled down to be accessible to those of you on a tighter budget. Dynalast Performance ComfortStarting with comfort, this is delivered via the Dynalast design, a single piece synthetic leather upper design that wraps the foot snugly. This offers a firm hold, foot stability and an optimized toe-spring section that ensures the most efficient and powerful pedal stroke possible with reduced fatigue over long distances. Perforations across the shoe keep your feet fresh too. The low-profile L6 dial gives you quick and easy adjustment of the fit, even on the bike. And at the end of your ride, it's simple to loosen the shoe to kick them off.Efficiently FastThe RC3s get you where you're going with minimum fuss and optimal efficiency thanks to a lightweight glass-fibre reinforced nylon sole. This rates 6 out of 12 on Shimano's stiffness scale, allowing you to get power to the pedals with minimal power loss. But at the same time, it has enough flex to soak up bumps and vibrations from the road, enhancing comfort on both short and long rides. They also feature a seamless midsole construction. This brings your foot closer to the pedal axles, giving a more natural pedal stroke and again maximising power transfer. Cleat GuidanceThese Road Shoes are compatible with road bike pedal systems that use cleats with 3-bolt standards, such as: Look Delta and Keo, Shimano SPD-SL, Speedplay Light Action, Zero, X-Series (via 3-hole adapter plate), Campagnolo Pro-Fit, Mavic Zxellium, Time Iclic/Xpresso and Time Impact.Features:Surround wrapping upper structure improves fit, reduces overlap and eliminates hot spotsSeamless midsole construction, minimises stack-height and maximises power transferSynthetic leather composite upper provides increased breathability and comfortGlass-fibre reinforced nylon soleSingle mid-shoe BOA® L6 dial ensures a perfect fit while maintaining a clean finishWeight: 242g (single size 42)Stiffness rating: 63-bolt cleat compatible (cleats not supplied)Buy Shimano Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Womens road cycling shoes with race-inspired style and features. Key Features: Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance.,Low stack height midsole stabilizes foot and maximizes power transfer efficiency.,T1-Quick strap and extra-wide collar simplifies foot entry and quickens transitions.,Quickly secure shoe during transitions with easy to grab asymmetrical heel loop.,3D breathable mesh improves airflow and dries quicker.,Women’s specific last for a natural, comfortable fit.,Lightweight glass fiber reinforced nylon sole for power transfer.,Adaptable Cup Insole..
Fully featured lightweight road competition shoe Optimised for maximum comfort whilst delivering maximum performance Ultra-rigid lightweight carbon fibre composite sole Shimano Dynalast to reduce braking loss and increasing pedalling efficiency Two Boa L6 dials allow quick micro tension adjustments Adjustable Powerzone wire guide holds foot securely Lightweight and supple high density perforated synthetic leather upper featuring superior fit and added cooling Sole stiffness 10 Weight: 490g a pair (Size 42)
High performance shoes featuring technologies previously found only in the S-PHYRE series. Surround wrapping upper structure improves fit reduces overlap and eliminates hot spots. Removal of the lasting board known as a seamless midsole construction minimises stack-height and maximises power transfer. Synthetic leather composite upper provides increased breathability and comfort Glass-fibre reinforced nylon sole Single mid-shoe BOA® L6 dial ensures a perfect fit while maintaining a clean finish Weight: 242g (size 42) Stiffness rating: 6
High performance shoes featuring technologies previously found only in the S-PHYRE series. Surround wrapping upper structure improves fit reduces overlap and eliminates hot spots Removal of the lasting board known as a seamless midsole construction minimises stack-height and maximises power transfer. Synthetic leather composite upper provides increased breathability and comfort Glass-fibre reinforced nylon sole Single mid-shoe BOA® L6 dial ensures a perfect fit while maintaining a clean finish Weight: 242g (size 42) Stiffness rating: 6
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
The Women's Carbon Tornado SPD-SL Road Cycling Shoes are made with a soft microfibre upper and 'Comfort-Fit' tongue, both moulding to the foot for perfect comfort. With copious amounts of ventilation holes, your feet will also feel fresh even after a hot summer ride. This excellent airflow is also complemented by the anatomically shaped 'Transpiration Insole'. It supports the foot during pedalling while micro-perforations let air circulate easily. The integrated heel-cup features both an anti-slip grip and an anti-tendonitis shape for exceptional foothold and comfort as you apply the power. BOA L6 Dial Adjustment When it comes to getting a secure and comfortable fit, you can't beat the lightweight BOA L6 dial system. Thanks to even pressure over the whole foot, it allows for a snug and precise fit, perfectly matching the snug fit of the upper and allows for greater air circulation across the front of the foot. EPS Carbon Power Sole 10.0 The EPS Carbon Power Sole 10.0 uses Carbon to give you rapid power transfer. Rated at 10 out of 12 for pedalling stiffness and yet ultra-thin, the sole allows your foot to sit closer to the pedal for a natural pedal stroke and excellent power-transfer with minimal loss of energy. Foot stability is also optimised thanks to specific support in the plantar arch area, providing an unrivalled pedalling platform for smooth power delivery to the pedals. Five air vents turbo-charge the airflow to your foot while an anti-slip toe and interchangeable rear pad make walking more safe and secure. Cleat Guidance These Road Shoes are compatible with road bike pedal systems that use cleats with 3-bolt standards, such as: Look Delta and Keo, Shimano SPD-SL, Speedplay Light Action, Zero, X-Series (via 3-hole adapter plate), Campagnolo Pro-Fit, Mavic Zxellium, Time Iclic/Xpresso and Time Impact.
Built for cycling over rough terrain but equally adept at support you out of the saddle in the great outdoors, the Giro Chamber II Off Road Shoes are an update of a genuine classic. They feature everything that you would expect, from clipless pedal compatibility to durable laces that hold a knot and a supportive fit but push beyond the usual with a durable out soul that features an aggressive tread pattern to keep you upright with perfect grip. Giro’s shoes are as tough as they come with an abrasion-resisting synthetic heel overlay and reinforced toe area but working with this is the highly breathable upper section that keeps you ventilated and wicks sweat away from the feet quickly. Find the confidence to take on whatever the trail could throw at you, thanks to the supreme Chamber II Off Road Shoes from Giro.