Velotoze Short Overshoes 2.0The VeloToze Short Overshoes 2.0 are more durable and easier to fit than their predecessors. A special coating has been added to the inside to make these version 2.0 shoe covers easier to dry out and use time and time again.VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Short Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock and bike shoe2: Pull shoe cover over toe of shoe3: Then pull shoe cover over heel, being careful not to catch on cleats4: Ensure no part of shoe covers are over cleats or heel pad. Pull shoe cover off of cleats and heel pad if necessary.CARE INSTRUCTIONSTo clean shoe covers/overshoes, wipe with a cool, wet cloth. Do not put shoe covers in the clothes washer.To dry, hang shoe covers/overshoes over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly. Do not put shoe covers/overshoes in the clothes dryer.After repeated use, apply talcum or baby powder to inside of shoe cover/overshoe to prevent stickingTIPSTo prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening. Avoid contact with sharp objectsDo not store in direct sunlightFeatures:Materials: 100% RubberWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:A light weight aero inspired overshoe for Spring and Autumn riding,Built with the Madison Genesis road team, the RoadRace PU backed Lycra overshoe is a great year item for racing and training in mild to warm conditions,Lycra backed PU fabric takes the chill off your feet while adding an aero touch at the same time,The waterproof fabric repels road spray,Reflective details are a welcome aid in low light conditions,Abrasion resistant toe fabric is tough with an element of stretch to ease the fitting and removal process,Rear zipper and adjustable cuff make for an easy fit,5 sizes fit 37-49 shoe sizes,Limited lifetime warranty.
Sometimes you just want a bit of extra protection but a full winter overshoe is just too much for the conditions. Toe covers bridge that gap between Autumn and Winter, Winter and Spring. They'll insulate your toes nicely on chilly days without the bulk of a full overshoe. Perfect for faster-paced rides or racing.
For the new version of the Toe Thingy, Castelli have thought carefully about how to offer better protection to your precious and stylish footwear. As a result, the second iteration is that little bit longer to guard more of the foot, and it can be worn either on its own or between your shoe and shoe cover. The Toe Thingy 2 is designed to be practical and durable too. On the underside you’ll find a combination of a rugged sole with silicone prints, which makes it resistant to abrasions and provide improved grip. There’s also a hole for your cleats, so they won’t get in the way of your pedals either. Castelli really have thought of everything with this one.
GripGrab RaceAero Shoe CoversGripGrab's RaceAero Shoe Covers offer optimal aerodynamic efficiency with an eye-catching finish. Ideal to accompany your Spring and Summer rides, these overshoes will protect against road spray and dirt from damp roads to keep your road cycling shoes in prime condition.Features:Material: 85% Polyamide, 15% ElastaneLightweightRace fitFlexible LycraYKK® ZipperAerodynamicCleat and heel cut-outBuy GripGrab Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Super lightweight and highly breathable; these RaceAero Shoe Covers are a simple yet very effective way to make a marginal gain, as well as to shield your feet from light spray and dirt. Speed, Speed and more Speed These RaceAero Lightweight Lycra Shoe Covers are all about speed - every little aerodynamic gain you can get to reduce drag helps maximise your power output and speed. Covering the shoes with these RaceAero overshoes helps smooth the airflow around your shoes gaining you precious savings in time and effort. As a secondary aspect, they will also help protect your shoes against road dirt and grime - but their primary purpose is maximising aerodynamics - when it comes to going as fast as possible every little bit helps. PLEASE NOTE: - This item comes as a pair - Hand wash only and not suitable for tumble dryer use.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Velotoze Tall Shoe Covers 2.0The original Velotoze overshoes were a massive hit, keeping road cyclists feet dry and aerodynamic in foul weather. The latest Tall Shoe Covers 2.0 are just as good but are now more durable and easier to fit. VetoToze have kept everything much loved about their Velotoze overshoes, namely completely waterproof and lightweight performance, but have addressed some of the issues on those first-generation designs. First and foremost the durability has been improved, with reinforcements on the bottom and in the toe area. A special coating has also been added to the inside of the covers so they're easier to dry and use again. Win-Win. VeloToze Tall Shoe Covers are designed for road cycling on cold, rainy or snowy days. Whether it’s race day, training day or just another commute day, VeloToze Tall Shoe Covers will keep your feet dry, warm and comfortable.HOW TO FIT YOUR VELOTOZE OVERSHOESDue to the fully flexible design without zippers or velcro, there is a recommended method for getting the VeloToze on. Once you've mastered it you'll find it does become second nature and a simple, easy process.1: Put on sock2: Pull shoe cover/overshoe on over your sock3: Put foot through large cleat hole, and pull shoe cover up around ankle4: Put on road bike shoe5: Pull shoe cover down over the heel of shoe FIRST, then toe6: Adjust around ankle, cleats and heel pad. Ensure no part of shoe covers/overshoe are over cleats or heel pad.Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.Road Shoe compatible onlyFeatures:Materials: 100% Latex RubberLatex construction - Please note these are a latex rubber product so not suitable if allergic to latex productsWaterproof: designed to form a tight seal with your calf, to keep your feet and shoes dryWindproof: windproof materials keep your feet warm even on cold morning or winter rides (5C/40F to 16C/60F)Reinforced: reinforced on the bottom and in the toe area for increased durabilityLightweight: made of a flexible, lightweight material that doesn't retain water when wetNo zippers or velcro straps : innovative overshoe design has no vulnerability points, like zippers or velcroAerodynamic: smooth, flexible material creates a form-fitting designCompact: easily fits in jersey pocket or saddle bagRoad Shoes onlyBuy Velotoze from Chain Reaction Cycles, the World's Largest Online Bike Store.
Northwave Fast H2O Cycling OvershoesNorthwave have taken their ever-popular H20 overshoes, and made them more aero and more rain-protective than ever. For fast rides in wet weather the Fast H2O Cycling Overhsoes are hard to beat. Made from a water-resistant PU coated material and with fully thermo-taped seams, the Fast H2O Cycling Overshoes do a great job of keeping out rain and road spray when storm clouds burst. Northwave have also done away with the usual rear zip, enhancing both water-resistance and comfort. The super-stretchy material also gives a second-skin fit for smooth airflow - just remember to pull your overshoes on before your shoes.A tall cuff works to add coverage over the lower legs and for low light and darkness, a reflective logo ensures you're easier to spot on the road.Features:Materials: 93% Polyamide, 7% PolyesterWater-resistant PU coated constructionFully thermo-taped keeps the water outAero snug fitNon-zipped designReflective logoTall cuffBuy Northwave Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Highly reflective, great weather protection for commuters and road riders.Key Features:Highly reflective print,Softshell main body fabric,Fitted design,Angled rear zip closure with Velcro tab fastener,Thermal properties help to keep you warm in colder months,Abrasion resistant underfoot, heel and toe fabric,Highly breathable.