Leatt DBX 4.0 Clipless ShoesClip-in and go tear up your favourite mountain bike trails with the superb comfort and pedalling efficiency of the Leatt DBX 4.0 Clipless Shoes. The rugged build is also tuned to take on the rigours of all your MTB riding adventures.For gravity riders who prefer the feel and security of clipping into the pedals, the DBX 4.0 Clipless Shoes are for you. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 4.0s are also built tough. Made from synthetic leather, they can take the daily use and abuse of mountain biking and still come out smiling. The water-resistant upper and weatherproof tongue also let you take on wet and muddy trails with ease. It's easy to clean too - bonus. With reinforced toe, heel and Achilles you'll avoid bumps and bruises from debris kicked up off the trail while the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. What more could you want when ripping MTB trails?Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Cross-tension straps for pedal efficiency and weather protectionUpper: Synthetic Leather - Water-resistant and easy to cleanTongue: Low-profile, padded and weather-resistantProtection: Inner ankle mid-height protectionReinforcements in toe, heel and AchillesBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 4.0 Clipless ShoesClip-in and go tear up your favourite mountain bike trails with the superb comfort and pedalling efficiency of the Leatt DBX 4.0 Clipless Shoes. The rugged build is also tuned to take on the rigours of all your MTB riding adventures.For gravity riders who prefer the feel and security of clipping into the pedals, the DBX 4.0 Clipless Shoes are for you. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 4.0s are also built tough. Made from synthetic leather, they can take the daily use and abuse of mountain biking and still come out smiling. The water-resistant upper and weatherproof tongue also let you take on wet and muddy trails with ease. It's easy to clean too - bonus. With reinforced toe, heel and Achilles you'll avoid bumps and bruises from debris kicked up off the trail while the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. What more could you want when ripping MTB trails?Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Cross-tension straps for pedal efficiency and weather protectionUpper: Synthetic Leather - Water-resistant and easy to cleanTongue: Low-profile, padded and weather-resistantProtection: Inner ankle mid-height protectionReinforcements in toe, heel and AchillesBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XC3 SPD MTB ShoesWhether dipping your toes into the world of cyclocross and XC mountain bike racing or for all-day off-road trail riding adventures, the Shimano XC3 SPD MTB Shoes ensure pedalling comfort and efficient power transfer. A brilliant entry-level off-road cycling shoe, the XC3 SPD MTB Shoes feature key technologies from higher price point shoes to ensure you enjoy rapid progress across any rough terrain while delivering all-day comfort too.Dynalast Performance ComfortStarting with comfort, this is delivered via the Dynalast design, a single piece synthetic leather upper design that wraps the foot snugly. This offers a firm hold, foot stability and an optimized toe-spring section that ensures the most efficient and powerful pedal stroke possible with reduced fatigue over long distances. Perforations across the shoe keep your feet fresh too. The low-profile L6 dial gives you quick and easy adjustment of the fit, even on the bike. And at the end of your ride, it's simple to loosen the shoe to kick them off.Efficiently FastThe XC3s get you where you're going with minimum fuss and optimal efficiency thanks to a lightweight glass-fibre reinforced nylon sole. This rates 5 out of 12 on Shimano's stiffness scale, allowing you to get power to the pedals with minimal power loss. But at the same time, it has enough flex to soak up bumps and vibrations from the terrain, enhancing comfort when you're riding off-road. They also feature a seamless midsole construction. This brings your foot closer to the pedal axles, giving a more natural pedal stroke and again maximising power transfer. And with the open tread design, you'll enjoy excellent grip when you're off the bike. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Seamless midsole construction, minimises stack-height and maximises power transferSurround wrapping upper structure improves fit, reduces overlap and eliminates hot spotsPerforated synthetic leather composite upper provides increased breathability and comfortLightweight glass-fibre reinforced nylon soleSingle mid-shoe BOA® L6 dial ensures a perfect fit while maintaining a clean finishImproved toe protectionWeight: 355g (single size 42)Stiffness rating: 52-bolt cleat compatible (cleats not supplied)Buy Shimano Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XC3 SPD MTB ShoesWhether dipping your toes into the world of cyclocross and XC mountain bike racing or for all-day off-road trail riding adventures, the Shimano XC3 SPD MTB Shoes ensure pedalling comfort and efficient power transfer. A brilliant entry-level off-road cycling shoe, the XC3 SPD MTB Shoes feature key technologies from higher price point shoes to ensure you enjoy rapid progress across any rough terrain while delivering all-day comfort too.Dynalast Performance ComfortStarting with comfort, this is delivered via the Dynalast design, a single piece synthetic leather upper design that wraps the foot snugly. This offers a firm hold, foot stability and an optimized toe-spring section that ensures the most efficient and powerful pedal stroke possible with reduced fatigue over long distances. Perforations across the shoe keep your feet fresh too. The low-profile L6 dial gives you quick and easy adjustment of the fit, even on the bike. And at the end of your ride, it's simple to loosen the shoe to kick them off.Efficiently FastThe XC3s get you where you're going with minimum fuss and optimal efficiency thanks to a lightweight glass-fibre reinforced nylon sole. This rates 5 out of 12 on Shimano's stiffness scale, allowing you to get power to the pedals with minimal power loss. But at the same time, it has enough flex to soak up bumps and vibrations from the terrain, enhancing comfort when you're riding off-road. They also feature a seamless midsole construction. This brings your foot closer to the pedal axles, giving a more natural pedal stroke and again maximising power transfer. And with the open tread design, you'll enjoy excellent grip when you're off the bike. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Seamless midsole construction, minimises stack-height and maximises power transferSurround wrapping upper structure improves fit, reduces overlap and eliminates hot spotsPerforated synthetic leather composite upper provides increased breathability and comfortLightweight glass-fibre reinforced nylon soleSingle mid-shoe BOA® L6 dial ensures a perfect fit while maintaining a clean finishImproved toe protectionWeight: 355g (single size 42)Stiffness rating: 52-bolt cleat compatible (cleats not supplied)Buy Shimano Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XC3 SPD MTB ShoesWhether dipping your toes into the world of cyclocross and XC mountain bike racing or for all-day off-road trail riding adventures, the Shimano XC3 SPD MTB Shoes ensure pedalling comfort and efficient power transfer. A brilliant entry-level off-road cycling shoe, the XC3 SPD MTB Shoes feature key technologies from higher price point shoes to ensure you enjoy rapid progress across any rough terrain while delivering all-day comfort too.Dynalast Performance ComfortStarting with comfort, this is delivered via the Dynalast design, a single piece synthetic leather upper design that wraps the foot snugly. This offers a firm hold, foot stability and an optimized toe-spring section that ensures the most efficient and powerful pedal stroke possible with reduced fatigue over long distances. Perforations across the shoe keep your feet fresh too. The low-profile L6 dial gives you quick and easy adjustment of the fit, even on the bike. And at the end of your ride, it's simple to loosen the shoe to kick them off.Efficiently FastThe XC3s get you where you're going with minimum fuss and optimal efficiency thanks to a lightweight glass-fibre reinforced nylon sole. This rates 5 out of 12 on Shimano's stiffness scale, allowing you to get power to the pedals with minimal power loss. But at the same time, it has enough flex to soak up bumps and vibrations from the terrain, enhancing comfort when you're riding off-road. They also feature a seamless midsole construction. This brings your foot closer to the pedal axles, giving a more natural pedal stroke and again maximising power transfer. And with the open tread design, you'll enjoy excellent grip when you're off the bike. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Seamless midsole construction, minimises stack-height and maximises power transferSurround wrapping upper structure improves fit, reduces overlap and eliminates hot spotsPerforated synthetic leather composite upper provides increased breathability and comfortLightweight glass-fibre reinforced nylon soleSingle mid-shoe BOA® L6 dial ensures a perfect fit while maintaining a clean finishImproved toe protectionWeight: 355g (single size 42)Stiffness rating: 52-bolt cleat compatible (cleats not supplied)Buy Shimano Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XC3 SPD MTB ShoesWhether dipping your toes into the world of cyclocross and XC mountain bike racing or for all-day off-road trail riding adventures, the Shimano XC3 SPD MTB Shoes ensure pedalling comfort and efficient power transfer. A brilliant entry-level off-road cycling shoe, the XC3 SPD MTB Shoes feature key technologies from higher price point shoes to ensure you enjoy rapid progress across any rough terrain while delivering all-day comfort too.Dynalast Performance ComfortStarting with comfort, this is delivered via the Dynalast design, a single piece synthetic leather upper design that wraps the foot snugly. This offers a firm hold, foot stability and an optimized toe-spring section that ensures the most efficient and powerful pedal stroke possible with reduced fatigue over long distances. Perforations across the shoe keep your feet fresh too. The low-profile L6 dial gives you quick and easy adjustment of the fit, even on the bike. And at the end of your ride, it's simple to loosen the shoe to kick them off.Efficiently FastThe XC3s get you where you're going with minimum fuss and optimal efficiency thanks to a lightweight glass-fibre reinforced nylon sole. This rates 5 out of 12 on Shimano's stiffness scale, allowing you to get power to the pedals with minimal power loss. But at the same time, it has enough flex to soak up bumps and vibrations from the terrain, enhancing comfort when you're riding off-road. They also feature a seamless midsole construction. This brings your foot closer to the pedal axles, giving a more natural pedal stroke and again maximising power transfer. And with the open tread design, you'll enjoy excellent grip when you're off the bike. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Seamless midsole construction, minimises stack-height and maximises power transferSurround wrapping upper structure improves fit, reduces overlap and eliminates hot spotsPerforated synthetic leather composite upper provides increased breathability and comfortLightweight glass-fibre reinforced nylon soleSingle mid-shoe BOA® L6 dial ensures a perfect fit while maintaining a clean finishImproved toe protectionWeight: 355g (single size 42)Stiffness rating: 52-bolt cleat compatible (cleats not supplied)Buy Shimano Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Improving comfort and delivering a sock-like fit, the Asics Gel-Cumulus 24 Running Shoes provide a plush feel that securely wraps the foot with a gender-specific 3D SPACE CONSTRUCTION™ to address different compression rates. The engineered mesh promotes breathability to allow airflow to disperse heat and reflective detailing increases visibility in low lighting conditions while an OrthoLite™ X-30 sockliner enhances comfort. At the midsole, rearfoot and forefoot GEL™ technology alongside FF BLAST™ cushioning quickly absorbs impact shock and returns energy for a responsive toe-off. Made with a full-ground contact design to create a smoother and more efficient ride and finished with a durable rubber outsole for a durable long-lasting grip.
It could be a long-distance bike ride of a weekend, a short but intense interval training session or maybe a relaxed-pace club ride - whatever the occasion the Women's G.Sprint Road Shoes offer efficiency and comfort to take on any ride in style. Comfort begins with the soft and flexible microfibre upper. This gives a supportive fit that holds your foot securely throughout your pedal stroke. It's perforated too, allowing your feet to breathe, making sure there's no unwelcome sweat hanging around during a summer riding session. The cushioned tongue also boosts comfort, and this too is perforated for excellent airflow. To the inside of the Women's G. Sprint shoes, the integrated anti-slip heel-cup offers a secure fit that adds foot stability and control. Ideal when you need to put the power down on a technical climb. An anatomically shaped insole also provides cushioned support, optimising pedalling and comfort. Boa L6 Closure System Getting a secure and comfortable fit for mountain biking is made easy with the BOA L6 dial system. With a simple twist of the dial, you can apply even pressure over the whole foot, allowing for a snug and precise fit, And with no straps or laces causing obstructions it allows for greater air circulation across the front of the foot too. EPS Carbon Power Sole 8.0 The EPS Carbon Power Sole 8.0 combines carbon and nylon to create a composite sole rated at 8 out of 12 for pedalling stiffness. This ensures optimal power transfer while giving enough flexibility to provide comfort for long days in the saddle. Compared to the previous iterations you now have 9mm of extra adjustment range fore/aft to get the perfect cleat position. Foot stability is also optimised thanks to specific support in the plantar arch area, providing an unrivalled pedalling platform for smooth power delivery to the pedals. Five air vents turbo-charge the airflow to your foot while an anti-slip toe and interchangeable rear pad make walking more safe and secure. Cleat Guidance These Road Shoes are compatible with road bike pedal systems that use cleats with 3-bolt standards, such as: Look Delta and Keo, Shimano SPD-SL, Speedplay Light Action, Zero, X-Series (via 3-hole adapter plate), Campagnolo Pro-Fit, Mavic Zxellium, Time Iclic/Xpresso and Time Impact.
With a flexible microfibre upper, the G.Trail MTB Shoes give a snug fit that provides instant comfort when you're on the trail and kicking up the dirt. It's perforated too, allowing your feet to breathe, making sure there's no unwelcome sweat hanging around during a summer riding session. The cushioned tongue also boosts comfort, and this too is perforated for excellent airflow. To the inside of the G.Trail shoes, the integrated anti-slip heel-cup offers a secure fit that adds foot stability and control. Ideal when you need to put the power down on a technical climb. An anatomically shaped insole also provides cushioned support, optimising pedalling and comfort. Boa L6 Closure System Getting a secure and comfortable fit for your mountain biking escapades is made easy with the BOA L6 dial system. With a simple twist of the dial, you can apply even pressure over the whole foot, allowing for a snug and precise fit. And with no straps or laces causing obstructions it allows for greater air circulation across the front of the foot too. MTB 2Density Sole 7.0 Made from a composite of nylon and fibreglass, the MTB 2Density Sole 7.0 is both light and durable. It offers excellent pedalling efficiency, rated 7 out of 12 for stiffness, but with enough give for comfort over rough terrain and when walking. When you're off the bike the aggressive tread pattern gives tenacious grip across a variety of terrain. Cleat Guidance These shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
High performance trail-conqueror. All new Tallac combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. The Cordura® upper is breathable and lightweight, but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. Features: MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. Traditional lacing for a tailored fit. Elastic lace tuck to keep laces secure. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt, debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
Gaerne G.Trail MTB ShoesMade for the demands of hard-charging trail riding mountain bikers, the Gaerne G.Trail MTB Shoes deliver an efficient pedalling experience, easy adjustability and comfort for all-day weekend rides or short MTB rides snatched after work.With a flexible microfibre upper, the G.Trail MTB Shoes give a snug fit that provides instant comfort when you're on the trail and kicking up the dirt. It's perforated too, allowing your feet to breathe, making sure there's no unwelcome sweat hanging around during a summer riding session. The cushioned tongue also boosts comfort, and this too is perforated for excellent airflow. To the inside of the G.Trail shoes, the integrated anti-slip heel-cup offers a secure fit that adds foot stability and control. Ideal when you need to put the power down on a technical climb. An anatomically shaped insole also provides cushioned support, optimising pedalling and comfort. Boa L6 Closure SystemGetting a secure and comfortable fit for your mountain biking escapades is made easy with the BOA L6 dial system. With a simple twist of the dial, you can apply even pressure over the whole foot, allowing for a snug and precise fit. And with no straps or laces causing obstructions it allows for greater air circulation across the front of the foot too. MTB 2Density Sole 7.0Made from a composite of nylon and fibreglass, the MTB 2Density Sole 7.0 is both light and durable. It offers excellent pedalling efficiency, rated 7 out of 12 for stiffness, but with enough give for comfort over rough terrain and when walking. When you're off the bike the aggressive tread pattern gives tenacious grip across a variety of terrain. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Perforated microfibre upperBoa L6 closure systemComfort-fit tongueTranspiration Insole - perforated for extra airflow - removableAn integrated anti-slip heel cupMTB 2Density Sole 7.07/12 Stiffness rating2-bolt cleat compatible (cleats no supplied)Buy Gaerne Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Gaerne G.Trail MTB ShoesMade for the demands of hard-charging trail riding mountain bikers, the Gaerne G.Trail MTB Shoes deliver an efficient pedalling experience, easy adjustability and comfort for all-day weekend rides or short MTB rides snatched after work.With a flexible microfibre upper, the G.Trail MTB Shoes give a snug fit that provides instant comfort when you're on the trail and kicking up the dirt. It's perforated too, allowing your feet to breathe, making sure there's no unwelcome sweat hanging around during a summer riding session. The cushioned tongue also boosts comfort, and this too is perforated for excellent airflow. To the inside of the G.Trail shoes, the integrated anti-slip heel-cup offers a secure fit that adds foot stability and control. Ideal when you need to put the power down on a technical climb. An anatomically shaped insole also provides cushioned support, optimising pedalling and comfort. Boa L6 Closure SystemGetting a secure and comfortable fit for your mountain biking escapades is made easy with the BOA L6 dial system. With a simple twist of the dial, you can apply even pressure over the whole foot, allowing for a snug and precise fit. And with no straps or laces causing obstructions it allows for greater air circulation across the front of the foot too. MTB 2Density Sole 7.0Made from a composite of nylon and fibreglass, the MTB 2Density Sole 7.0 is both light and durable. It offers excellent pedalling efficiency, rated 7 out of 12 for stiffness, but with enough give for comfort over rough terrain and when walking. When you're off the bike the aggressive tread pattern gives tenacious grip across a variety of terrain. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Perforated microfibre upperBoa L6 closure systemComfort-fit tongueTranspiration Insole - perforated for extra airflow - removableAn integrated anti-slip heel cupMTB 2Density Sole 7.07/12 Stiffness rating2-bolt cleat compatible (cleats no supplied)Buy Gaerne Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.