Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Cub-Scout 24 Mountain Bike FrameComing kitted out with a robust aluminium build, this kid's mountain bike (MTB) frame offers an excellent balance of strength, durability and performance. Engineered for kid's who want to dive into the world of MTB riding, Nukeproof has also put this model through its hydroforming and triple-butting process, which makes it more than capable of handling the demands of learning to ride the trails. Another benefit is its comfortable kid's specific geometry and its internal routing that allows for a dropper seatpost to be used. This makes it a great choice for young riders who want to perfect their skills, wherever their next adventure leads them.Trail-Ready 24" Kid's MTB FrameThe Cub-Scout 24” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 24” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners!The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 alloy frameset with bang up to date long, low and slack kids specific geometry.Features: Material: Nukeproof Cub-Scout 24”, custom triple-butted hydro-formed 6061 Alloy Use: Kid's Mountain Bike (MTB) Frame Fork Travel: 100mm Axle to Crown: 455mm Fork Offset: 38mm Wheels Size: 24" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44/56mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal Routing for Dropper Seatpost) Seat Clamp: 31.8mm Bottom Bracket: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.7kgBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Solid MC Colour Block JerseyClassic styling meets functional fabrics meets a performance fit, the Solid MC Colour Block Jersey from Ale is a beautifully fitting summer cycling top you'll enjoy slipping on for any two-wheeled adventure.The Solid MC Colour Block Jersey is made from a combination of functional lightweight fabrics to deliver exceptional performance when the heat is on. Firstly Bike Mesh, a rapid-drying and exceptionally breathable fabric keeps you cool on the ups, and the quick drying time prevents discomfort and wind chill on those fast and fun downhills. Next comes Freshness, another lightweight fabric that also delivers excellent breathability and is wonderfully comfortable against the skin.The performance fit of the Colour Block jersey offers a touch more room than their race fit garments, making it perfect for any size and shape of rider and for those of you who value all-day comfort and freedom of movement above pure aerodynamic considerations. A silicone waist gripper provides a flush fit with your shorts and a smooth running zipper makes it easy to control ventilation when the road starts to climb or temperatures head upwards.FeaturesMaterials: 85% Polyester, 15% ElastaneFreshness and Bike Mesh performance fabricsYKK VISLON® ZipperSilicone elastic band at the waistReflective inserts on the backSuggested temperature range: 18 to 26 Degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
100% R-Core Concept Sleeveless JerseyForming part of the R-Core Concept mountain bike system, the race-focused 100% R-Core Concept Sleeveless Jersey is a top designed to perfectly complement the Concept Long Sleeve under-jersey (not supplied). On race day pair the R-Core Concept Sleeveless Jersey with the Concept base long-sleeve jersey and pants and you have the ideal race combo. This lightweight sleeveless bib sits smoothly over the R-Core Concept long sleeve Jersey, giving aerodynamic performance and incredible moisture-wicking comfort. Or you can just as easily wear it on its own as a superlight and breathable sleeveless jersey, making it perfect for scorching summer pike park loops.The polyester mesh fabric and zone vents deliver uncompromised moisture management and airflow. This means that even during the toughest of enduro or downhill races you never overheat or get soaked in sweat. Comfort is also boosted via the taped neckline and armholes, which also have the benefit of keeping bulk to a minimum too. Fade-resistant graphics stay vibrant wash after wash and the internal goggle wipe makes sure your chosen eyewear remains crystal clear. Features:Materials: 100% PolyesterSleeveless top - works as is or with R-Core Concept Long Sleeve Jersey (Long sleeve base not supplied)Polyester mesh fabric with moisture-wicking management propertiesDroptail increases coverage in the riding positionTaped neckline, armholes and hem for weight reduction and comfortFade-resistant sublimated graphicsInternal goggle wipe keeps your eye protection cleanSilicone heat transfersBuy 100% Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
100% R-Core Concept Sleeveless JerseyForming part of the R-Core Concept mountain bike system, the race-focused 100% R-Core Concept Sleeveless Jersey is a top designed to perfectly complement the Concept Long Sleeve under-jersey (not supplied). On race day pair the R-Core Concept Sleeveless Jersey with the Concept base long-sleeve jersey and pants and you have the ideal race combo. This lightweight sleeveless bib sits smoothly over the R-Core Concept long sleeve Jersey, giving aerodynamic performance and incredible moisture-wicking comfort. Or you can just as easily wear it on its own as a superlight and breathable sleeveless jersey, making it perfect for scorching summer pike park loops.The polyester mesh fabric and zone vents deliver uncompromised moisture management and airflow. This means that even during the toughest of enduro or downhill races you never overheat or get soaked in sweat. Comfort is also boosted via the taped neckline and armholes, which also have the benefit of keeping bulk to a minimum too. Fade-resistant graphics stay vibrant wash after wash and the internal goggle wipe makes sure your chosen eyewear remains crystal clear. Features:Materials: 100% PolyesterSleeveless top - works as is or with R-Core Concept Long Sleeve Jersey (Long sleeve base not supplied)Polyester mesh fabric with moisture-wicking management propertiesDroptail increases coverage in the riding positionTaped neckline, armholes and hem for weight reduction and comfortFade-resistant sublimated graphicsInternal goggle wipe keeps your eye protection cleanSilicone heat transfersBuy 100% Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Air GlovesMitts that offer great comfort with that barely-there feel. The Air Gloves from Ale feature a thermogripper waist to keep them in place and avoid distractions, the stretchy material in the back ensures the right fit, and padding in all the right places protects your hands from road rash should you come off the bike. The Air Gloves really are the ultimate in comfortable protection on the road.Features:Back & Insert Material: 80% Polyester, 20% ElastanePalm Material: 100% NylonThermogripper wristStretch backPadded palmBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fasthouse Alloy Kilo MTB JerseySitting at the very top of the Fasthouse jersey line, the premium Alloy Kilo MTB Jersey has all you need to perform on the toughest of mountain bike trails. Whether racing the clock or racing mates to the bottom, it's got you covered. When it comes to mountain biking comfort and performance, it's hard to beat the feature-packed Fasthouse Alloy Kilo MTB Jersey. With its use of FastDri fabric, you'll enjoy quick-wicking comfort, the sweat you generate quickly drawn off the body before irritation sets in. You'll also find mesh panels under the arms, across the back and at the wrists, all enhancing airflow, keeping you cooler when you're hitting trails hard. The fit of the Alloy jersey is Fasthouse's 'Athletic Fit'. Not too baggy, not too tight, it strikes the ideal balance between easy mobility on the bike and less flapping and more speed when you're all in and going full gas. A slight drop tail keeps you covered as you get into aggressive riding positions while overlocked stitching ensures long-term durability. The distinctive Fasthouse style comes in the way of high-quality silk-screened graphics to the chest. Sleeves also get reflective stretch transfers to catch the eye and fully dyed fabrics give deep colours that will last wash after wash. This is a jersey made to last season after season. Features:Materials: 94% Polyester, 6% ElastaneFastDri fabric wicks moisture awayMesh vented underarms/wrist & back for increased coolingSlight drop tail on back panel for full coverage while ridingOverlocked stitching for improved durabilityBuilt-in zipper pocket with reflective reinforcement tabsFully dyed fabrics to ensure true long-lasting colourV-cut stretch collar to reduce pressure against the neckHigh-quality silk-screened graphic on front chestReflective stretch transfer graphics on both sleevesUltrathin stretch transfer neck label for improved comfortAthletic jersey fitBuy Fasthouse Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Corsa Bib Shorts SS18Ideal for those who want to start taking their road riding a little more seriously, the Corsa Bib Shorts by Ale are the ultimate in Body Mapped comfort. This means that no matter your size or shape, the Corsa will fit you like a dream thanks to the multi-panel design and mesh stability system. It’s breathable too, via the micro-perforations in the elastic straps.Inside the shorts you’ll find a 2HF pad, anatomically designed to give you support and complete freedom of movement all at once, making it perfect for solo runs or competitive races. Variable thickness in the elastic insert gives you the best and most adaptable protection for longer rides.All of those premium features without the premium price tag. Isn’t it time you tried the Corsa Bib Shorts for yourself?Features:Main Material: 80% Nylon, 20% SpandexFront & Back Material: 75% Nylon, 25% ElastaneBody Mapping / mesh stability systemMulti-panel designSuper comfort fitLeg hem with Security ReflexStraps made in micro-pierced elastic meshBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Winter BibshortsThe Winter Bibshorts take the comfort and perfect fit of Alé's summer shorts and add extra warmth via a soft thermal fabric, making the ideally suited to the cooler days of autumn, spring and into winter. Whether it's a long weekend ride or grabbing an hour after work, the Winter Bibshorts are the ideal choice when temperatures are cool to mild. The Thermo Garzato microfibre is cosily warm but it's also incredibly breathable, perfect for rides where conditions can change quickly and speeds can easily go from steady to fast and back again as you build fitness. Worn on their own or paired with knee or leg warmers, you have a versatile short you'll enjoy using across a wide range of temperatures and across any season.Inside the shorts, you'll fine Ale's 4HF seat pad offering luxurious comfort for all your rides. It's constructed from elastic micro-fibre with padding strategically positioned in the contact points and features a central relief channel to avoid stress on nerve endings. For the best comfort and support high-density 8mm deep 90 kg/cm2 padding is used where it's most needed in the ischiadic and perineal zones. This pad gives the very best combination of comfort, wicking, breathability and is also incredibly fast drying to ensure the utmost comfort on the saddle.Features:Materials: 86% Polyamide, 16% ElastaneThermo Garzato thermal microfibreBibs in warm thermal fabricReflective details for safety4HF SeatpadSuggested temperature range 6 to 15 Degrees CBuy Alé Cycle Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Solid Blend Winter Cycling Bib ShortsMade from fleece-backed SuperRoubaix Thermal materials, the Ale Solid Blend Winter Cycling Bib Shorts extend the time when you can enjoy wearing shorts. The perfect pick for the cooler conditions of autumn and spring.You don't always want or need to resort to covering the legs when temperatures head down, particularly in the transitional seasons of autumn and spring or when riding at high intensities. The Solid Blend Winter Cycling Bib Shorts offer the freedom of wearing shorts into cooler months of the year where the added warmth is a major plus. The SuperRoubaix fabric used here is not only great at holding on to warmth but it breathes remarkably well too - this gives greater comfort in a wide range of temperatures.Men's 4HF Seat PadThese winter shorts use Ale's renowned 4HF seat pad, designed for rides of up to 4 hours. Constructed with an elastic microfiber and anatomically shaped for the utmost freedom of movement it's ideally suited to medium to long-distance training rides and racing. The support is strategically positioned in the key saddle contact points, 90 kg/cm² density padding in the perineal and ischiatic area, making for an incredibly comfortable feel.FeaturesMaterials: 80% Polyamide, 20% ElastaneSuperRoubaix Thermal materialsTT-GripperReflective details for visibilityMen's 4HF Seat PadSuggested temperature range: 6 to 15 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Team SocksFresh and sweat free feet are happy feet, the Ale Team Socks make cycling a more comfortable affair when the heat of summer arrives.The Team Socks make use of Meryl Skinlife, this soft and lightweight material does a brilliant job of removing sweat from the skin before it can cause discomfort. While the Meryl Skinlife keeps sweat under control the mesh zones keep air circulating over the foot, speeding sweat evaporation for greater cooling and even more comfort when pushing on the pedals. FeaturesMaterials: 80% Polyamide, 20% ElastaneMeryl Skinlife socksToe and heel in no-blister fabric20 cm cuffBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Scanner Cycling SocksWhen it comes to summer cycling, you can't beat the Alé Scanner Cycling Socks. Utilising Q-SKIN® technology, they deliver fresh feet mile after mile. Light and breathable, the Scanner Cycling Socks excel as temperatures rise. As you warm up and sweat begins to build, the Q-SKIN® technology begins its work. Silver ions help to reduce bacterial build-up, keeping your feet feeling fresh and odour free. Mesh zones also offer a boost to breathability too, preventing moisture build-up and maintaining comfort for the long haul. FeaturesMaterials: 96% Polyamide, 4% ElastaneQ-Skin anti-bacterial yarnsBreathable and quick-wicking16cm CuffSuggested temperature range: 18 to 30 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.